|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen-unstable] Remove xend-config-xenapi.sxp and xm-config-xenapi.xml
# HG changeset patch # User Keir Fraser <keir.fraser@xxxxxxxxxx> # Date 1211532465 -3600 # Node ID fbc8cf8e0d6b3c419c798a77de4db930db0cd6a4 # Parent fbf09143c2e51b9f662e9d53020fa2487674edc4 Remove xend-config-xenapi.sxp and xm-config-xenapi.xml The contents of these two files are duplicate of xend-config.sxp and xm-config.xml. They only add maintaining burdens to developers. This patch removes them permanently. Signed-off-by: Zhigang Wang <zhigang.x.wang@xxxxxxxxxx> --- tools/examples/xend-config-xenapi.sxp | 196 ---------------------------------- tools/examples/xm-config-xenapi.xml | 41 ------- 2 files changed, 237 deletions(-) diff -r fbf09143c2e5 -r fbc8cf8e0d6b tools/examples/xend-config-xenapi.sxp --- a/tools/examples/xend-config-xenapi.sxp Fri May 23 09:35:57 2008 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,196 +0,0 @@ -# -*- sh -*- - -# -# Xend configuration file. -# - -# This example configuration is appropriate for an installation that -# utilizes a bridged network configuration. Access to xend via http -# is disabled. - -# Commented out entries show the default for that entry, unless otherwise -# specified. - -#(logfile /var/log/xen/xend.log) -#(loglevel DEBUG) - - -# The Xen-API server configuration. (Please note that this server is -# available as an UNSUPPORTED PREVIEW in Xen 3.0.4, and should not be relied -# upon). -# -# This value configures the ports, interfaces, and access controls for the -# Xen-API server. Each entry in the list starts with either unix, a port -# number, or an address:port pair. If this is "unix", then a UDP socket is -# opened, and this entry applies to that. If it is a port, then Xend will -# listen on all interfaces on that TCP port, and if it is an address:port -# pair, then Xend will listen on the specified port, using the interface with -# the specified address. -# -# The subsequent string configures the user-based access control for the -# listener in question. This can be one of "none" or "pam", indicating either -# that users should be allowed access unconditionally, or that the local -# Pluggable Authentication Modules configuration should be used. If this -# string is missing or empty, then "pam" is used. -# -# The final string gives the host-based access control for that listener. If -# this is missing or empty, then all connections are accepted. Otherwise, -# this should be a space-separated sequence of regular expressions; any host -# with a fully-qualified domain name or an IP address that matches one of -# these regular expressions will be accepted. -# -# Example: listen on TCP port 9363 on all interfaces, accepting connections -# only from machines in example.com or localhost, and allow access through -# the unix domain socket unconditionally: -# - (xen-api-server ((9363 none))) -# (unix none))) -# -# Optionally, the TCP Xen-API server can use SSL by specifying the private -# key and certificate location: -# -# (9367 pam '' /etc/xen/xen-api.key /etc/xen/xen-api.crt) -# -# Default: -# (xen-api-server ((unix))) - - -#(xend-http-server no) -#(xend-unix-server no) -#(xend-tcp-xmlrpc-server no) -#(xend-unix-xmlrpc-server yes) -#(xend-relocation-server no) -(xend-relocation-server yes) - -#(xend-unix-path /var/lib/xend/xend-socket) - - -# Address and port xend should use for the legacy TCP XMLRPC interface, -# if xend-tcp-xmlrpc-server is set. -#(xend-tcp-xmlrpc-server-address 'localhost') -#(xend-tcp-xmlrpc-server-port 8006) - -# SSL key and certificate to use for the legacy TCP XMLRPC interface. -# Setting these will mean that this port serves only SSL connections as -# opposed to plaintext ones. -#(xend-tcp-xmlrpc-server-ssl-key-file /etc/xen/xmlrpc.key) -#(xend-tcp-xmlrpc-server-ssl-cert-file /etc/xen/xmlrpc.crt) - - -# Port xend should use for the HTTP interface, if xend-http-server is set. -#(xend-port 8000) - -# Port xend should use for the relocation interface, if xend-relocation-server -# is set. -#(xend-relocation-port 8002) - -# Address xend should listen on for HTTP connections, if xend-http-server is -# set. -# Specifying 'localhost' prevents remote connections. -# Specifying the empty string '' (the default) allows all connections. -#(xend-address '') -#(xend-address localhost) - -# Address xend should listen on for relocation-socket connections, if -# xend-relocation-server is set. -# Meaning and default as for xend-address above. -#(xend-relocation-address '') - -# The hosts allowed to talk to the relocation port. If this is empty (the -# default), then all connections are allowed (assuming that the connection -# arrives on a port and interface on which we are listening; see -# xend-relocation-port and xend-relocation-address above). Otherwise, this -# should be a space-separated sequence of regular expressions. Any host with -# a fully-qualified domain name or an IP address that matches one of these -# regular expressions will be accepted. -# -# For example: -# (xend-relocation-hosts-allow '^localhost$ ^.*\\.example\\.org$') -# -#(xend-relocation-hosts-allow '') -(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$') - -# The limit (in kilobytes) on the size of the console buffer -#(console-limit 1024) - -## -# To bridge network traffic, like this: -# -# dom0: ----------------- bridge -> real eth0 -> the network -# | -# domU: fake eth0 -> vifN.0 -+ -# -# use -# -# (network-script network-bridge) -# -# Your default ethernet device is used as the outgoing interface, by default. -# To use a different one (e.g. eth1) use -# -# (network-script 'network-bridge netdev=eth1') -# -# The bridge is named xenbr0, by default. To rename the bridge, use -# -# (network-script 'network-bridge bridge=<name>') -# -# It is possible to use the network-bridge script in more complicated -# scenarios, such as having two outgoing interfaces, with two bridges, and -# two fake interfaces per guest domain. To do things like this, write -# yourself a wrapper script, and call network-bridge from it, as appropriate. -# -(network-script network-bridge) - -# The script used to control virtual interfaces. This can be overridden on a -# per-vif basis when creating a domain or a configuring a new vif. The -# vif-bridge script is designed for use with the network-bridge script, or -# similar configurations. -# -# If you have overridden the bridge name using -# (network-script 'network-bridge bridge=<name>') then you may wish to do the -# same here. The bridge name can also be set when creating a domain or -# configuring a new vif, but a value specified here would act as a default. -# -# If you are using only one bridge, the vif-bridge script will discover that, -# so there is no need to specify it explicitly. -# -(vif-script vif-bridge) - - -## Use the following if network traffic is routed, as an alternative to the -# settings for bridged networking given above. -#(network-script network-route) -#(vif-script vif-route) - - -## Use the following if network traffic is routed with NAT, as an alternative -# to the settings for bridged networking given above. -#(network-script network-nat) -#(vif-script vif-nat) - -# dom0-min-mem is the lowest permissible memory level (in MB) for dom0. -# This is a minimum both for auto-ballooning (as enabled by -# enable-dom0-ballooning below) and for xm mem-set when applied to dom0. -(dom0-min-mem 196) - -# Whether to enable auto-ballooning of dom0 to allow domUs to be created. -# If enable-dom0-ballooning = no, dom0 will never balloon out. -(enable-dom0-ballooning yes) - -# In SMP system, dom0 will use dom0-cpus # of CPUS -# If dom0-cpus = 0, dom0 will take all cpus available -(dom0-cpus 0) - -# Whether to enable core-dumps when domains crash. -#(enable-dump no) - -# The tool used for initiating virtual TPM migration -#(external-migration-tool '') - -# The interface for VNC servers to listen on. Defaults -# to 127.0.0.1 To restore old 'listen everywhere' behaviour -# set this to 0.0.0.0 -#(vnc-listen '127.0.0.1') - -# The default password for VNC console on HVM domain. -# Empty string is no authentication. -(vncpasswd '') diff -r fbf09143c2e5 -r fbc8cf8e0d6b tools/examples/xm-config-xenapi.xml --- a/tools/examples/xm-config-xenapi.xml Fri May 23 09:35:57 2008 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,43 +0,0 @@ -<!-- - -Copyright (C) 2006 XenSource Inc. - -This library is free software; you can redistribute it and/or -modify it under the terms of version 2.1 of the GNU Lesser General Public -License as published by the Free Software Foundation. - -This library is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -Lesser General Public License for more details. - -You should have received a copy of the GNU Lesser General Public -License along with this library; if not, write to the Free Software -Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - ---> - -<!-- - -This is a configuration file for xm; it should be placed in -/etc/xen/xm-config.xml. If this file is missing, then xm will fall back to -the normal behaviour that's in Xen 3.0.4 and below. The settings here are -most useful for experimenting with the Xen-API preview in Xen 3.0.4. - ---> - -<xm> - <!-- The server element describes how to talk to Xend. The type may be - Xen-API or LegacyXMLRPC (the default). The URI is that of the - server; you might try http://server:9363/ or - httpu:///var/run/xend/xen-api.sock for the Xen-API, or - httpu:///var/run/xend/xmlrpc.sock for the legacy server. - - The username and password attributes will be used to log in if Xen-API - is being used. - --> - <server type='Xen-API' - uri='http://localhost:9363/' - username='me' - password='mypassword' /> -</xm> _______________________________________________ Xen-changelog mailing list Xen-changelog@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |