|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [qemu-xen-unstable] e1000: Handle IO Port.
commit 1a13c2df0c5c93f06c0f2286628b9b0f4d80ff4d
Author: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Date: Thu Oct 21 17:59:20 2010 +0100
e1000: Handle IO Port.
This patch introduces the two IOPorts on e1000, IOADDR and IODATA. The
IOADDR is used to specify which register we want to access when we read
or write on IODATA.
It also check the RDLEN register when a packet is received, if the value
is 0, the receive descriptor buffer is not set, so we don't accept any
network packets.
This patch fixes some weird behavior that I see when I use e1000 with
QEMU/Xen, the guest memory can be corrupted by this NIC because it will
write on memory that it doesn't own anymore after a reset. It's because
the kernel Linux use the IOPort to reset the network card instead of the
MMIO.
This patch also intruduces e1000_reset function.
Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
Signed-off-by: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>
---
hw/e1000.c | 136 +++++++++++++++++++++++++++++++++++++++++++++++++++++-------
1 files changed, 120 insertions(+), 16 deletions(-)
diff --git a/hw/e1000.c b/hw/e1000.c
index 1644201..bb3689e 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -52,6 +52,9 @@ static int debugflags = DBGBIT(TXERR) | DBGBIT(GENERAL);
#define IOPORT_SIZE 0x40
#define PNPMMIO_SIZE 0x20000
+#define REG_IOADDR 0x0
+#define REG_IODATA 0x4
+
/*
* HW models:
* E1000_DEV_ID_82540EM works with Windows and Linux
@@ -77,6 +80,8 @@ typedef struct E1000State_st {
VLANClientState *vc;
NICInfo *nd;
int mmio_index;
+ int ioport_base;
+ uint32_t ioport_reg[2];
uint32_t mac_reg[0x8000];
uint16_t phy_reg[0x20];
@@ -143,12 +148,7 @@ static const char phy_regcap[0x20] = {
[PHY_ID2] = PHY_R, [M88E1000_PHY_SPEC_STATUS] = PHY_R
};
-static void
-ioport_map(PCIDevice *pci_dev, int region_num, uint32_t addr,
- uint32_t size, int type)
-{
- DBGOUT(IO, "e1000_ioport_map addr=0x%04x size=0x%08x\n", addr, size);
-}
+static void e1000_reset(void *opaque);
static void
set_interrupt_cause(E1000State *s, int index, uint32_t val)
@@ -191,6 +191,18 @@ rxbufsize(uint32_t v)
}
static void
+set_ctrl(E1000State *s, int index, uint32_t val)
+{
+ DBGOUT(IO, "set ctrl = %08x\n", val);
+ if (val & E1000_CTRL_RST) {
+ s->mac_reg[CTRL] = val;
+ e1000_reset(s);
+ }
+ /* RST is self clearing */
+ s->mac_reg[CTRL] = val & ~E1000_CTRL_RST;
+}
+
+static void
set_rx_control(E1000State *s, int index, uint32_t val)
{
s->mac_reg[RCTL] = val;
@@ -590,7 +602,7 @@ e1000_can_receive(void *opaque)
{
E1000State *s = opaque;
- return (s->mac_reg[RCTL] & E1000_RCTL_EN);
+ return (s->mac_reg[RCTL] & E1000_RCTL_EN && s->mac_reg[RDLEN] != 0);
}
static void
@@ -624,6 +636,11 @@ e1000_receive(void *opaque, const uint8_t *buf, int size)
size -= 4;
}
+ if (s->mac_reg[RDLEN] == 0) {
+ DBGOUT(RX, "receive descriptor buffer not set\n");
+ return;
+ }
+
rdh_start = s->mac_reg[RDH];
size += 4; // for the header
do {
@@ -784,12 +801,12 @@ enum { NREADOPS = ARRAY_SIZE(macreg_readops) };
static void (*macreg_writeops[])(E1000State *, int, uint32_t) = {
putreg(PBA), putreg(EERD), putreg(SWSM), putreg(WUFC),
putreg(TDBAL), putreg(TDBAH), putreg(TXDCTL), putreg(RDBAH),
- putreg(RDBAL), putreg(LEDCTL), putreg(CTRL), putreg(VET),
+ putreg(RDBAL), putreg(LEDCTL), putreg(VET),
[TDLEN] = set_dlen, [RDLEN] = set_dlen, [TCTL] = set_tctl,
[TDT] = set_tctl, [MDIC] = set_mdic, [ICS] = set_ics,
[TDH] = set_16bit, [RDH] = set_16bit, [RDT] = set_rdt,
[IMC] = set_imc, [IMS] = set_ims, [ICR] = set_icr,
- [EECD] = set_eecd, [RCTL] = set_rx_control,
+ [EECD] = set_eecd, [RCTL] = set_rx_control, [CTRL] = set_ctrl,
[RA ... RA+31] = &mac_writereg,
[MTA ... MTA+127] = &mac_writereg,
[VFTA ... VFTA+127] = &mac_writereg,
@@ -797,6 +814,60 @@ static void (*macreg_writeops[])(E1000State *, int,
uint32_t) = {
enum { NWRITEOPS = ARRAY_SIZE(macreg_writeops) };
static void
+e1000_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
+{
+ E1000State *s = opaque;
+
+ if (addr == s->ioport_base + REG_IOADDR) {
+ DBGOUT(IO, "e1000_ioport_writel write base: 0x%04x\n", val);
+ s->ioport_reg[REG_IOADDR] = val & 0xfffff;
+ } else if (addr == (s->ioport_base + REG_IODATA)) {
+ unsigned int index = (s->ioport_reg[REG_IOADDR] & 0x1ffff) >> 2;
+
+#ifdef TARGET_WORDS_BIGENDIAN
+ val = bswap32(val);
+#endif
+ DBGOUT(IO, "e1000_ioport_writel %x: 0x%04x\n", index, val);
+
+ if (index < NWRITEOPS && macreg_writeops[index]) {
+ macreg_writeops[index](s, index, val);
+ } else if (index < NREADOPS && macreg_readops[index]) {
+ DBGOUT(IO, "e1000_ioport_writel RO %x: 0x%04x\n", index << 2, val);
+ } else {
+ DBGOUT(UNKNOWN, "IO unknown write index=0x%08x,val=0x%08x\n",
+ index, val);
+ }
+ } else {
+ DBGOUT(UNKNOWN, "IO unknown write addr=0x%08x,val=0x%08x\n",
+ addr, val);
+ }
+}
+
+static uint32_t
+e1000_ioport_readl(void *opaque, uint32_t addr)
+{
+ E1000State *s = opaque;
+
+ if (addr == s->ioport_base + REG_IOADDR) {
+ return s->ioport_reg[REG_IOADDR] & 0xfffff;
+ } else if (addr == (s->ioport_base + REG_IODATA)) {
+ unsigned int index = (s->ioport_reg[REG_IOADDR] & 0x1ffff) >> 2;
+
+ if (index < NREADOPS && macreg_readops[index]) {
+ uint32_t val = macreg_readops[index](s, index);
+#ifdef TARGET_WORDS_BIGENDIAN
+ val = bswap32(val);
+#endif
+ return val;
+ }
+ DBGOUT(UNKNOWN, "IO unknown read addr=0x%08x\n", index<<2);
+ } else {
+ DBGOUT(UNKNOWN, "IO unknown read addr=0x%08x\n", addr);
+ }
+ return 0;
+}
+
+static void
e1000_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
{
E1000State *s = opaque;
@@ -1003,6 +1074,31 @@ static const uint32_t mac_reg_init[] = {
/* PCI interface */
+static void
+e1000_ioport_map(PCIDevice *pci_dev, int region_num, uint32_t addr,
+ uint32_t size, int type)
+{
+ E1000State *d = (E1000State *) pci_dev;
+
+ return;
+
+ DBGOUT(IO, "e1000_ioport_map addr=0x%04x size=0x%08x\n", addr, size);
+
+ d->ioport_base = addr;
+
+ /* Writes that are less than 32 bits are ignored on IOADDR.
+ * For the Flash access, a write can be less than 32 bits for
+ * IODATA register, but is not handled.
+ */
+
+ register_ioport_read(addr, size, 1, e1000_ioport_readl, d);
+
+ register_ioport_read(addr, size, 2, e1000_ioport_readl, d);
+
+ register_ioport_write(addr, size, 4, e1000_ioport_writel, d);
+ register_ioport_read(addr, size, 4, e1000_ioport_readl, d);
+}
+
static CPUWriteMemoryFunc *e1000_mmio_write[] = {
e1000_mmio_writeb, e1000_mmio_writew, e1000_mmio_writel
};
@@ -1044,6 +1140,19 @@ pci_e1000_uninit(PCIDevice *dev)
return 0;
}
+static void e1000_reset(void *opaque)
+{
+ E1000State *d = opaque;
+
+ memset(d->ioport_reg, 0, sizeof d->ioport_reg);
+ memset(d->phy_reg, 0, sizeof d->phy_reg);
+ memmove(d->phy_reg, phy_reg_init, sizeof phy_reg_init);
+ memset(d->mac_reg, 0, sizeof d->mac_reg);
+ memmove(d->mac_reg, mac_reg_init, sizeof mac_reg_init);
+ d->rxbuf_min_shift = 1;
+ memset(&d->tx, 0, sizeof d->tx);
+}
+
PCIDevice *
pci_e1000_init(PCIBus *bus, NICInfo *nd, int devfn)
{
@@ -1076,7 +1185,7 @@ pci_e1000_init(PCIBus *bus, NICInfo *nd, int devfn)
PCI_ADDRESS_SPACE_MEM, e1000_mmio_map);
pci_register_io_region((PCIDevice *)d, 1, IOPORT_SIZE,
- PCI_ADDRESS_SPACE_IO, ioport_map);
+ PCI_ADDRESS_SPACE_IO, e1000_ioport_map);
d->nd = nd;
memmove(d->eeprom_data, e1000_eeprom_template,
@@ -1088,12 +1197,7 @@ pci_e1000_init(PCIBus *bus, NICInfo *nd, int devfn)
checksum = (uint16_t) EEPROM_SUM - checksum;
d->eeprom_data[EEPROM_CHECKSUM_REG] = checksum;
- memset(d->phy_reg, 0, sizeof d->phy_reg);
- memmove(d->phy_reg, phy_reg_init, sizeof phy_reg_init);
- memset(d->mac_reg, 0, sizeof d->mac_reg);
- memmove(d->mac_reg, mac_reg_init, sizeof mac_reg_init);
- d->rxbuf_min_shift = 1;
- memset(&d->tx, 0, sizeof d->tx);
+ e1000_reset(d);
d->vc = qemu_new_vlan_client(nd->vlan, nd->model, nd->name,
e1000_receive, e1000_can_receive, d);
--
generated by git-patchbot for /home/xen/git/qemu-xen-unstable.git
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |