[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen-unstable] arm: Shutdown and reboot
# HG changeset patch # User Tim Deegan <tim@xxxxxxx> # Date 1331651457 0 # Node ID 1e5da26611f36b90c70b3827edc33caa26bd7942 # Parent d21c626d89c65aadbb7f8dac23e8e8f5344bb48e arm: Shutdown and reboot Reboot runes grabbed from linux's SP810 reset function. Doesn't seem to work on the model, though. Signed-off-by: Tim Deegan <tim@xxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Committed-by: Ian Campbell <ian.campbell@xxxxxxxxxx> --- diff -r d21c626d89c6 -r 1e5da26611f3 xen/arch/arm/shutdown.c --- a/xen/arch/arm/shutdown.c Tue Mar 13 15:10:56 2012 +0000 +++ b/xen/arch/arm/shutdown.c Tue Mar 13 15:10:57 2012 +0000 @@ -1,18 +1,64 @@ #include <xen/config.h> +#include <xen/console.h> +#include <xen/cpu.h> +#include <xen/delay.h> #include <xen/lib.h> +#include <xen/mm.h> +#include <xen/smp.h> + +static void raw_machine_reset(void) +{ + /* XXX get this from device tree */ +#ifdef SP810_ADDRESS + /* Use the SP810 system controller to force a reset */ + volatile uint32_t *sp810; + set_fixmap(FIXMAP_MISC, SP810_ADDRESS >> PAGE_SHIFT, DEV_SHARED); + sp810 = ((uint32_t *) + (FIXMAP_ADDR(FIXMAP_MISC) + (SP810_ADDRESS & ~PAGE_MASK))); + sp810[0] = 0x3; /* switch to slow mode */ + dsb(); isb(); + sp810[1] = 0x1; /* writing any value to SCSYSSTAT reg will reset system */ + dsb(); isb(); + clear_fixmap(FIXMAP_MISC); +#endif +} + +static void halt_this_cpu(void *arg) +{ + __cpu_disable(); + stop_cpu(); +} void machine_halt(void) { - /* TODO: halt */ - while(1) ; + watchdog_disable(); + console_start_sync(); + local_irq_enable(); + smp_call_function(halt_this_cpu, NULL, 0); + halt_this_cpu(NULL); } void machine_restart(unsigned int delay_millisecs) { - /* TODO: restart */ - printk("Cannot restart yet\n"); - while(1); + int timeout = 10; + + local_irq_enable(); + smp_call_function(halt_this_cpu, NULL, 0); + local_irq_disable(); + + mdelay(delay_millisecs); + + /* Wait at most another 10ms for all other CPUs to go offline. */ + while ( (num_online_cpus() > 1) && (timeout-- > 0) ) + mdelay(1); + + while ( 1 ) + { + raw_machine_reset(); + mdelay(100); + } } + /* * Local variables: * mode: C diff -r d21c626d89c6 -r 1e5da26611f3 xen/include/asm-arm/config.h --- a/xen/include/asm-arm/config.h Tue Mar 13 15:10:56 2012 +0000 +++ b/xen/include/asm-arm/config.h Tue Mar 13 15:10:57 2012 +0000 @@ -119,6 +119,9 @@ #define GIC_CR_OFFSET 0x2000 #define GIC_HR_OFFSET 0x4000 /* Guess work http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/064219.html */ #define GIC_VR_OFFSET 0x6000 /* Virtual Machine CPU interface) */ +/* Board-specific: base address of system controller */ +#define SP810_ADDRESS 0x1C020000 + #endif /* __ARM_CONFIG_H__ */ /* _______________________________________________ Xen-changelog mailing list Xen-changelog@xxxxxxxxxxxxx http://lists.xensource.com/xen-changelog
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |