[Xen-changelog] [xen-unstable] docs: spelling and typoes in misc/xen-command-line.markdown

[Xen patchbot-unstable <patchbot@xxxxxxx>]

# HG changeset patch
# User Ian Campbell <ian.campbell@xxxxxxxxxx>
# Date 1332778273 -3600
# Node ID ac0fcd6eeef789d004b88551c3651c1962a2a674
# Parent  aa2d6abb5a85e607fb397bc4f77458fce8097c24
docs: spelling and typoes in misc/xen-command-line.markdown

Run a spell checker over the doc and fix the typos and spelling it uncovers
(including a few I just added myself).

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---


diff -r aa2d6abb5a85 -r ac0fcd6eeef7 docs/misc/xen-command-line.markdown
--- a/docs/misc/xen-command-line.markdown       Mon Mar 26 17:09:59 2012 +0100
+++ b/docs/misc/xen-command-line.markdown       Mon Mar 26 17:11:13 2012 +0100
@@ -5,7 +5,7 @@
   arch trees, and some options are currently separate from their
   legacy versions.  Please remove this notice when complete.**
 
-This document coveres the command line options which the Xen
+This document covers the command line options which the Xen
 Hypervisor.
 
 ## Types of parameter
@@ -38,7 +38,7 @@ Enable synchronous console mode
 ### Integer (`<integer>`)
 
 An integer parameter will default to decimal and may be prefixed with
-a `-` for negative numbers.  Alternativly, a hexidecimal number may be
+a `-` for negative numbers.  Alternatively, a hexadecimal number may be
 used by prefixing the number with `0x`, or an octal number may be used
 if a leading `0` is present.
 
@@ -56,7 +56,7 @@ Without a size suffix, the default will 
 ### String
 
 Many parameters are more complicated and require more intricate
-configuration.  The detailed description of each individual paramter
+configuration.  The detailed description of each individual parameter
 specify which values are valid.
 
 ### List
@@ -96,7 +96,7 @@ from the MP tables.
 Finally, any of the boolean false options can be used to disable ACPI
 usage entirely.
 
-Because responsiblity for ACPI processing is shared between Xen and
+Because responsibility for ACPI processing is shared between Xen and
 the domain 0 kernel this option is automatically propagated to the
 domain 0 command line
 
@@ -112,7 +112,7 @@ than one is present.
 
 Instruct Xen to ignore timer-interrupt override.
 
-Because responsiblity for ACPI processing is shared between Xen and
+Because responsibility for ACPI processing is shared between Xen and
 the domain 0 kernel this option is automatically propagated to the
 domain 0 command line
 
@@ -178,7 +178,7 @@ Both option `com1` and `com2` follow the
 * `pci` indicates that Xen should scan the PCI bus for the UART,
   avoiding Intel AMT devices.
 * `amt` indicated that Xen should scan the PCI bus for the UART,
-  including Intel AMT devices if presetn.
+  including Intel AMT devices if present.
 
 A typical setup for most situations might be `com1=115200,8n1`
 
@@ -200,10 +200,10 @@ Specify which console(s) Xen should use.
 `vga` indicates that Xen should try and use the vga graphics adapter.
 
 `com1` and `com2` indicates that Xen should use serial ports 1 and 2
-respectivly.  Optionally, these arguments may be followed by an `H` or
+respectively.  Optionally, these arguments may be followed by an `H` or
 `L`.  `H` indicates that transmitted characters will have their MSB
-set, while recieved characters must have their MSB set.  `L` indicates
-the converse; transmitted and recieved characters will have their MSB
+set, while received characters must have their MSB set.  `L` indicates
+the converse; transmitted and received characters will have their MSB
 cleared.  This allows a single port to be shared by two subsystems
 (e.g. console and debugger).
 
@@ -255,7 +255,7 @@ console during dom0 boot.
 
 > Default: `4G`
 
-Specify the maximum address to allocate certain strucutres, if used in
+Specify the maximum address to allocate certain structures, if used in
 combination with the `low_crashinfo` command line option.
 
 ### crashkernel
@@ -274,7 +274,7 @@ Specify the bit width of the DMA heap.
 ### dom0\_max\_vcpus
 > `= <integer>`
 
-Specifiy the maximum number of vcpus to give to dom0.  This defaults
+Specify the maximum number of vcpus to give to dom0.  This defaults
 to the number of pcpus on the host.
 
 ### dom0\_mem (ia64)
@@ -345,7 +345,9 @@ Increase the number of PIRQs available f
 Set the logging level for Xen guests.  Any log message with equal more
 more importance will be printed.
 
-The optional `<rate-limited level>` options instructs which severities should 
be rate limited.
+The optional `<rate-limited level>` option instructs which severities
+should be rate limited.
+
 ### hap\_1gb
 ### hap\_2mb
 ### hpetbroadcast
@@ -373,7 +375,7 @@ all.
 Set the logging level for Xen.  Any log message with equal more more
 importance will be printed.
 
-The optional `<rate-limited level>` options instructs which severities
+The optional `<rate-limited level>` option instructs which severities
 should be rate limited.
 
 ### low\_crashinfo
@@ -383,7 +385,7 @@ should be rate limited.
 
 This option is only useful for hosts with a 32bit dom0 kernel, wishing
 to use kexec functionality in the case of a crash.  It represents
-which data structures should be deliberatly allocated in low memory,
+which data structures should be deliberately allocated in low memory,
 so the crash kernel may find find them.  Should be used in combination
 with `crashinfo_maxaddr`.
 
@@ -416,7 +418,7 @@ Instruct Xen to ignore any IOAPICs that 
 instead continue to use the legacy PIC. This is _not_ recommended with
 pvops type kernels.
 
-Because responsiblity for APIC setup is shared between Xen and the
+Because responsibility for APIC setup is shared between Xen and the
 domain 0 kernel this option is automatically propagated to the domain
 0 command line.
 
@@ -474,7 +476,7 @@ Choose the default scheduler.
 ### serial\_tx\_buffer
 > `= <size>`
 
-Set the serial tramsit buffer size.  Defaults to 16kB.
+Set the serial transmit buffer size.  Defaults to 16kB.
 
 ### smep
 ### snb\_igd\_quirk
@@ -526,7 +528,7 @@ with the specified width, height and dep
 
 `mode-<mode>` instructs Xen to use a specific mode, as shown with the
 `ask` option.  (N.B menu modes are displayed in hex, so `<mode>`
-should be a hexidecimal number)
+should be a hexadecimal number)
 
 The optional `keep` parameter causes Xen to continue using the vga
 console even after dom0 has been started.  The default behaviour is to

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog