[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen master] xen/arm: WORKAROUND Support kick cpus and switch to hypervisor for the exynos5



commit bd74772eb65f6624437f789c1e6884e073a03fcc
Author:     Julien Grall <julien.grall@xxxxxxxxxx>
AuthorDate: Sun Apr 28 21:07:20 2013 +0100
Commit:     Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Mon May 13 12:00:02 2013 +0100

    xen/arm: WORKAROUND Support kick cpus and switch to hypervisor for the 
exynos5
    
    Use machine ID to know what is the current board. This value is only given
    to the first CPU by the bootloader.
    
    When the exynos 5 starts, there is only one CPU up. Xen needs to start the
    secondary cpu. The latter boots in secure mode.
    
    Theses modifications aim to be removed as soon as possible. It should
    be moved either in a platform specific boot-wrapper (which will be start
    before Xen), or in the bootloader (assuming U-Boot/Grub will support SMP).
    
    Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
    Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
---
 xen/arch/arm/arm32/head.S                |   19 +++++++-
 xen/arch/arm/arm32/mode_switch.S         |   75 ++++++++++++++++++++++-------
 xen/include/asm-arm/platforms/vexpress.h |   11 ++++
 3 files changed, 86 insertions(+), 19 deletions(-)

diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index d452b59..ec7f640 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -76,7 +76,7 @@ past_zImage:
         cpsid aif                    /* Disable all interrupts */
 
         /* Save the bootloader arguments in less-clobberable registers */
-        /* No need to save r1 == Unused ARM-linux machine type */
+        mov   r5, r1                 /* r5: ARM-linux machine type */
         mov   r8, r2                 /* r8 := DTB base address */
 
         /* Find out where we are */
@@ -119,11 +119,25 @@ boot_cpu:
         bl    putn
         PRINT(" booting -\r\n")
 #endif
+        /* Secondary CPUs doesn't have machine ID
+         *  - Store machine ID on boot CPU
+         *  - Load machine ID on secondary CPUs
+         * Machine ID is needed in kick_cpus and enter_hyp_mode */
+        ldr   r0, =machine_id           /* VA of machine_id */
+        add   r0, r0, r10               /* PA of machine_id */
+        teq   r12, #0
+        streq r5, [r0]                  /* On boot CPU save machine ID */
+        ldrne r5, [r0]                  /* If non boot cpu r5 := machine ID */
 
         /* Wake up secondary cpus */
         teq   r12, #0
         bleq  kick_cpus
 
+        PRINT("- Machine ID ")
+        mov   r0, r5
+        bl    putn
+        PRINT(" -\r\n")
+
         /* Check that this CPU has Hyp mode */
         mrc   CP32(r0, ID_PFR1)
         and   r0, r0, #0xf000        /* Bits 12-15 define virt extensions */
@@ -403,6 +417,9 @@ putn:   mov   pc, lr
 
 #endif /* !EARLY_PRINTK */
 
+/* Place holder for machine ID */
+machine_id: .word 0x0
+
 /*
  * Local variables:
  * mode: ASM
diff --git a/xen/arch/arm/arm32/mode_switch.S b/xen/arch/arm/arm32/mode_switch.S
index d6741d0..c92a1cf 100644
--- a/xen/arch/arm/arm32/mode_switch.S
+++ b/xen/arch/arm/arm32/mode_switch.S
@@ -20,14 +20,21 @@
 #include <asm/config.h>
 #include <asm/page.h>
 #include <asm/platforms/vexpress.h>
+#include <asm/platforms/exynos5.h>
 #include <asm/asm_defns.h>
 #include <asm/gic.h>
 
-
-/* XXX: Versatile Express specific code */
-/* wake up secondary cpus */
+/* Wake up secondary cpus
+ * This code relies on Machine ID and only works for Vexpress and the Arndale
+ * TODO: Move this code either later (via platform specific desc) or in a 
bootwrapper
+ * r5: Machine ID
+ * Clobber r0 r2 */
 .globl kick_cpus
 kick_cpus:
+        ldr   r0, =MACH_TYPE_SMDK5250
+        teq   r5, r0                          /* Are we running on the 
arndale? */
+        beq   kick_cpus_arndale
+        /* otherwise versatile express */
         /* write start paddr to v2m sysreg FLAGSSET register */
         ldr   r0, =(V2M_SYS_MMIO_BASE)        /* base V2M sysreg MMIO address 
*/
         dsb
@@ -38,8 +45,20 @@ kick_cpus:
         add   r2, r2, r10
         str   r2, [r0, #(V2M_SYS_FLAGSSET)]
         dsb
+        ldr   r2, =V2M_GIC_BASE_ADDRESS       /* r2 := VE gic base address */
+        b     kick_cpus_sgi
+kick_cpus_arndale:
+        /* write start paddr to CPU 1 sysreg register */
+        ldr   r0, =(S5P_PA_SYSRAM)
+        ldr   r2, =start
+        add   r2, r2, r10
+        str   r2, [r0]
+        dsb
+        ldr   r2, =EXYNOS5_GIC_BASE_ADDRESS   /* r2 := Exynos5 gic base 
address */
+kick_cpus_sgi:
         /* send an interrupt */
-        ldr   r0, =(GIC_BASE_ADDRESS + GIC_DR_OFFSET) /* base GICD MMIO 
address */
+        ldr   r0, =GIC_DR_OFFSET              /* GIC distributor offset */
+        add   r0, r2                          /* r0 := r0 + gic base address */
         mov   r2, #0x1
         str   r2, [r0, #(GICD_CTLR * 4)]      /* enable distributor */
         mov   r2, #0xfe0000
@@ -51,13 +70,15 @@ kick_cpus:
 
 /* Get up a CPU into Hyp mode.  Clobbers r0-r3.
  *
- * Expects r12 == CPU number
+ * r5: Machine ID
+ * r12: CPU number
  *
- * This code is specific to the VE model, and not intended to be used
+ * This code is specific to the VE model/Arndale, and not intended to be used
  * on production systems.  As such it's a bit hackier than the main
  * boot code in head.S.  In future it will be replaced by better
  * integration with the bootloader/firmware so that Xen always starts
- * in Hyp mode. */
+ * in Hyp mode.
+ * Clobber r0 - r4 */
 
 .globl enter_hyp_mode
 enter_hyp_mode:
@@ -68,33 +89,51 @@ enter_hyp_mode:
         orr   r0, r0, #0xb1          /* Set SCD, AW, FW and NS */
         bic   r0, r0, #0xe           /* Clear EA, FIQ and IRQ */
         mcr   CP32(r0, SCR)
+
+        ldr   r2, =MACH_TYPE_SMDK5250   /* r4 := Arndale machine ID */
+        /* By default load Arndale defaults values */
+        ldr   r0, =EXYNOS5_TIMER_FREQUENCY  /* r0 := timer's frequency */
+        ldr   r1, =EXYNOS5_GIC_BASE_ADDRESS /* r1 := GIC base address */
+        /* If it's not the Arndale machine ID, load VE values */
+        teq   r5, r2
+        ldrne r0, =V2M_TIMER_FREQUENCY
+        ldrne r1, =V2M_GIC_BASE_ADDRESS
+
         /* Ugly: the system timer's frequency register is only
          * programmable in Secure state.  Since we don't know where its
          * memory-mapped control registers live, we can't find out the
-         * right frequency.  Use the VE model's default frequency here. */
-        ldr   r0, =0x5f5e100         /* 100 MHz */
+         * right frequency. */
         mcr   CP32(r0, CNTFRQ)
         ldr   r0, =0x40c00           /* SMP, c11, c10 in non-secure mode */
         mcr   CP32(r0, NSACR)
-        mov   r0, #GIC_BASE_ADDRESS
-        add   r0, r0, #GIC_DR_OFFSET
+
+        add   r0, r1, #GIC_DR_OFFSET
         /* Disable the GIC distributor, on the boot CPU only */
-        mov   r1, #0
+        mov   r4, #0
         teq   r12, #0                /* Is this the boot CPU? */
-        streq r1, [r0]
+        streq r4, [r0]
         /* Continuing ugliness: Set up the GIC so NS state owns interrupts,
          * The first 32 interrupts (SGIs & PPIs) must be configured on all
          * CPUs while the remainder are SPIs and only need to be done one, on
          * the boot CPU. */
         add   r0, r0, #0x80          /* GICD_IGROUP0 */
         mov   r2, #0xffffffff        /* All interrupts to group 1 */
-        teq   r12, #0                /* Boot CPU? */
         str   r2, [r0]               /* Interrupts  0-31 (SGI & PPI) */
-        streq r2, [r0, #4]           /* Interrupts 32-63 (SPI) */
-        streq r2, [r0, #8]           /* Interrupts 64-95 (SPI) */
+        teq   r12, #0                /* Boot CPU? */
+        bne   skip_spis              /* Don't route SPIs on secondary CPUs */
+
+        add   r4, r1, #GIC_DR_OFFSET
+        ldr   r4, [r4, #4]            /* r4 := Interrupt Controller Type Reg */
+        and   r4, r4, #GICD_TYPE_LINES /* r4 := number of SPIs */
+1:      teq   r4, #0
+        beq   skip_spis
+        add   r0, r0, #4             /* Go to the new group */
+        str   r2, [r0]               /* Update the group */
+        sub  r4, r4, #1
+        b     1b
+skip_spis:
         /* Disable the GIC CPU interface on all processors */
-        mov   r0, #GIC_BASE_ADDRESS
-        add   r0, r0, #GIC_CR_OFFSET
+        add   r0, r1, #GIC_CR_OFFSET
         mov   r1, #0
         str   r1, [r0]
         /* Must drop priority mask below 0x80 before entering NS state */
diff --git a/xen/include/asm-arm/platforms/vexpress.h 
b/xen/include/asm-arm/platforms/vexpress.h
index 5cf3aba..982a293 100644
--- a/xen/include/asm-arm/platforms/vexpress.h
+++ b/xen/include/asm-arm/platforms/vexpress.h
@@ -32,6 +32,17 @@
 int vexpress_syscfg(int write, int function, int device, uint32_t *data);
 #endif
 
+/* Constants below is only used in assembly because the DTS is not yet parsed 
*/
+#ifdef __ASSEMBLY__
+
+/* GIC base address */
+#define V2M_GIC_BASE_ADDRESS        0x2c000000
+
+/* Timer's frequency */
+#define V2M_TIMER_FREQUENCY         0x5f5e100 /* 100 Mhz */
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* __ASM_ARM_PLATFORMS_VEXPRESS_H */
 /*
  * Local variables:
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.