[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen master] tools: drop VT-i example



commit 460dea6c817eada4f7d43097b1e71e975a7ba52b
Author:     Jan Beulich <JBeulich@xxxxxxxx>
AuthorDate: Tue Aug 27 14:23:07 2013 +0100
Commit:     Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Tue Aug 27 14:49:19 2013 +0100

    tools: drop VT-i example
    
    ... as being another IA64 leftover.
    
    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 tools/examples/Makefile      |    1 -
 tools/examples/xmexample.vti |  180 ------------------------------------------
 2 files changed, 0 insertions(+), 181 deletions(-)

diff --git a/tools/examples/Makefile b/tools/examples/Makefile
index cc853fa..df24e38 100644
--- a/tools/examples/Makefile
+++ b/tools/examples/Makefile
@@ -14,7 +14,6 @@ XEN_CONFIGS-$(CONFIG_XEND) += xmexample.hvm
 XEN_CONFIGS-$(CONFIG_XEND) += xmexample.hvm-stubdom
 XEN_CONFIGS-$(CONFIG_XEND) += xmexample.pv-grub
 XEN_CONFIGS-$(CONFIG_XEND) += xmexample.nbd
-XEN_CONFIGS-$(CONFIG_XEND) += xmexample.vti
 XEN_CONFIGS-$(CONFIG_XEND) += xend-pci-quirks.sxp
 XEN_CONFIGS-$(CONFIG_XEND) += xend-pci-permissive.sxp
 
diff --git a/tools/examples/xmexample.vti b/tools/examples/xmexample.vti
deleted file mode 100644
index f97cbe9..0000000
--- a/tools/examples/xmexample.vti
+++ /dev/null
@@ -1,180 +0,0 @@
-#  -*- mode: python; -*-
-#============================================================================
-# Python configuration setup for 'xm create'.
-# This script sets the parameters used when a domain is created using 'xm 
create'.
-# You use a separate script for each domain you want to create, or 
-# you can set the parameters for the domain on the xm command line.
-#============================================================================
-
-import os, re
-arch_libdir = 'lib'
-arch = os.uname()[4]
-
-#----------------------------------------------------------------------------
-# Kernel image file.
-kernel = "guest_firmware.bin"
-
-# The domain build function. VTI domain uses 'hvm'.
-builder='hvm'
-
-# Initial memory allocation (in megabytes) for the new domain.
-#
-# WARNING: Creating a domain with insufficient memory may cause out of
-#          memory errors. The domain needs enough memory to boot kernel
-#          and modules. Allocating less than 32MBs is not recommended.
-memory = 256
-
-# A name for your domain. All domains must have different names.
-name = "ExampleVTIDomain"
-
-# the number of cpus guest platform has, default=1
-#vcpus=1
-
-# List of which CPUS this domain is allowed to use, default Xen picks
-#cpus = ""         # leave to Xen to pick
-#cpus = "0"        # all vcpus run on CPU0
-#cpus = "0-3,5,^1" # all vcpus run on cpus 0,2,3,5
-#cpus = ["2", "3"] # VCPU0 runs on CPU2, VCPU1 runs on CPU3
-
-# Log2 of VHPT size, default=23 (8MB), minimum=15 (32KB).
-# In Windows OS, smaller size shows better performance.
-#vhpt = 23
-
-# Optionally define mac and/or bridge for the network interfaces.
-# Random MACs are assigned if not given.
-#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ]
-# type=ioemu specify the NIC is an ioemu device not netfront
-vif = [ 'type=ioemu, bridge=xenbr0' ]
-
-#----------------------------------------------------------------------------
-# Define the disk devices you want the domain to have access to, and
-# what you want them accessible as.
-# Each disk entry is of the form phy:UNAME,DEV,MODE
-# where UNAME is the device, DEV is the device name the domain will see,
-# and MODE is r for read-only, w for read-write.
-
-#disk = [ 'phy:hda1,hda1,r' ]
-disk = [ 'file:/var/images/xenia64.img,hda,w', ',hdc:cdrom,r' ]
-
-#----------------------------------------------------------------------------
-# Set according to whether you want the domain restarted when it exits.
-# The default is 'onreboot', which restarts the domain when it shuts down
-# with exit code reboot.
-# Other values are 'always', and 'never'.
-
-#restart = 'onreboot'
-
-#============================================================================
-
-# New stuff
-device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
-
-#-----------------------------------------------------------------------------
-# boot on floppy (a), hard disk (c) or CD-ROM (d) 
-# default: hard disk, cd-rom, floppy
-#boot="cda"
-
-#-----------------------------------------------------------------------------
-#  write to temporary files instead of disk image files
-#snapshot=1
-
-#----------------------------------------------------------------------------
-# enable SDL library for graphics, default = 0
-sdl=1
-
-#----------------------------------------------------------------------------
-# enable VNC library for graphics, default = 1
-vnc=0
-
-#----------------------------------------------------------------------------
-# set VNC display number, default = domid
-#vncdisplay=1
-
-#----------------------------------------------------------------------------
-# try to find an unused port for the VNC server, default = 1
-#vncunused=1
-
-#----------------------------------------------------------------------------
-# set password for domain's VNC console
-# default is depents on vncpasswd in xend-config.sxp
-vncpasswd=''
-
-#----------------------------------------------------------------------------
-# no graphics, use serial port
-#nographic=0
-
-#----------------------------------------------------------------------------
-# enable stdvga, default = 0 (use cirrus logic device model)
-stdvga=0
-
-#-----------------------------------------------------------------------------
-#   serial port re-direct to pty deivce, /dev/pts/n
-#   then xm console or minicom can connect
-serial='pty'
-
-#-----------------------------------------------------------------------------
-#   Qemu Monitor, default is disable
-#   Use ctrl-alt-2 to connect
-#monitor=1
-
-#-----------------------------------------------------------------------------
-#   enable sound card support, [sb16|es1370|all|..,..], default none
-#soundhw='sb16'
-
-#-----------------------------------------------------------------------------
-#    set the real time clock to local time [default=0 i.e. set to utc]
-#localtime=1
-
-#-----------------------------------------------------------------------------
-#    start in full screen
-#full-screen=1   diff -r 42cab8724273 tools/libxc/xc_ia64_stubs.c
-
-#-----------------------------------------------------------------------------
-#   Enable USB support (specific devices specified at runtime through the
-#           monitor window)
-#usb=1
-
-#   Enable USB mouse support (only enable one of the following, `mouse' for
-#                 PS/2 protocol relative mouse, `tablet' for
-#                 absolute mouse)
-#usbdevice='mouse'
-#usbdevice='tablet'
-
-#-----------------------------------------------------------------------------
-#   Set keyboard layout, default is en-us keyboard.
-#keymap='ja'
-
-#-----------------------------------------------------------------------------
-#   Enable optimization features for the specified OS type. (Specific to the
-#           OS running in the guest domain.  Other OSes may not run correctly
-#           if the wrong OS type is specified.)
-#
-#   Default is "default", which should work for all supported guest OSes.
-#
-#   Known values:
-#    'linux' - All Linux variants
-#    'windows' - All Windows variants (Windows Server 2003/2008)
-#
-#guest_os_type='default'
-
-#-----------------------------------------------------------------------------
-#   Configure PVSCSI devices:
-#
-#vscsi=[ 'PDEV, VDEV' ]
-#
-#   PDEV   gives physical SCSI device to be attached to specified guest
-#          domain by one of the following identifier format.
-#          - XX:XX:XX:XX (4-tuples with decimal notation which shows
-#                          "host:channel:target:lun")
-#          - /dev/sdxx or sdx
-#          - /dev/stxx or stx
-#          - /dev/sgxx or sgx
-#          - result of 'scsi_id -gu -s'.
-#            ex. # scsi_id -gu -s /block/sdb
-#                  36000b5d0006a0000006a0257004c0000
-#
-#   VDEV   gives virtual SCSI device by 4-tuples (XX:XX:XX:XX) as 
-#          which the specified guest domain recognize.
-#
-
-#vscsi = [ '/dev/sdx, 0:0:0:0' ]
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.