|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] ns16550: make usable on ARM
commit 7c1de0038895cbc75ebd0caffc5b0f3f03c5ad51
Author: Ian Campbell <ian.campbell@xxxxxxxxxx>
AuthorDate: Fri Sep 20 17:18:34 2013 +0100
Commit: Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Sat Sep 21 16:27:45 2013 +0100
ns16550: make usable on ARM
There are several aspects to this:
- Correctly conditionalise use of PCI
- Correctly conditionalise use of IO ports
- Add discovery via device tree
- Support different registers shift/stride and widths
- Add vuart hooks.
Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Acked-by: Keir Frser <keir@xxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
Cc: PranavkumarSawargaonkar<pranavkumar@xxxxxxxxxx>
---
config/arm32.mk | 1 +
xen/Rules.mk | 3 +
xen/arch/x86/Rules.mk | 1 +
xen/drivers/char/ns16550.c | 193 +++++++++++++++++++++++++++++++++++++++++---
4 files changed, 186 insertions(+), 12 deletions(-)
diff --git a/config/arm32.mk b/config/arm32.mk
index 76e229d..aa79d22 100644
--- a/config/arm32.mk
+++ b/config/arm32.mk
@@ -12,6 +12,7 @@ CFLAGS += -marm
HAS_PL011 := y
HAS_EXYNOS4210 := y
HAS_OMAP := y
+HAS_NS16550 := y
# Use only if calling $(LD) directly.
LDFLAGS_DIRECT += -EL
diff --git a/xen/Rules.mk b/xen/Rules.mk
index 736882a..df1428f 100644
--- a/xen/Rules.mk
+++ b/xen/Rules.mk
@@ -60,6 +60,9 @@ CFLAGS-$(lock_profile) += -DLOCK_PROFILE
CFLAGS-$(HAS_ACPI) += -DHAS_ACPI
CFLAGS-$(HAS_GDBSX) += -DHAS_GDBSX
CFLAGS-$(HAS_PASSTHROUGH) += -DHAS_PASSTHROUGH
+CFLAGS-$(HAS_DEVICE_TREE) += -DHAS_DEVICE_TREE
+CFLAGS-$(HAS_PCI) += -DHAS_PCI
+CFLAGS-$(HAS_IOPORTS) += -DHAS_IOPORTS
CFLAGS-$(frame_pointer) += -fno-omit-frame-pointer -DCONFIG_FRAME_POINTER
ifneq ($(max_phys_cpus),)
diff --git a/xen/arch/x86/Rules.mk b/xen/arch/x86/Rules.mk
index eb11b5b..c93d2af 100644
--- a/xen/arch/x86/Rules.mk
+++ b/xen/arch/x86/Rules.mk
@@ -1,6 +1,7 @@
########################################
# x86-specific definitions
+HAS_IOPORTS := y
HAS_ACPI := y
HAS_VGA := y
HAS_VIDEO := y
diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
index e0f80f6..45da924 100644
--- a/xen/drivers/char/ns16550.c
+++ b/xen/drivers/char/ns16550.c
@@ -13,14 +13,19 @@
#include <xen/init.h>
#include <xen/irq.h>
#include <xen/sched.h>
-#include <xen/pci.h>
#include <xen/timer.h>
#include <xen/serial.h>
#include <xen/iocap.h>
+#ifdef HAS_PCI
#include <xen/pci.h>
#include <xen/pci_regs.h>
+#endif
#include <xen/8250-uart.h>
+#include <xen/vmap.h>
#include <asm/io.h>
+#ifdef HAS_DEVICE_TREE
+#include <asm/device.h>
+#endif
#ifdef CONFIG_X86
#include <asm/fixmap.h>
#endif
@@ -40,15 +45,23 @@ string_param("com2", opt_com2);
static struct ns16550 {
int baud, clock_hz, data_bits, parity, stop_bits, fifo_size, irq;
- unsigned long io_base; /* I/O port or memory-mapped I/O address. */
+ u64 io_base; /* I/O port or memory-mapped I/O address. */
+ u32 io_size;
+ int reg_shift; /* Bits to shift register offset by */
+ int reg_width; /* Size of access to use, the registers
+ * themselves are still bytes */
char __iomem *remapped_io_base; /* Remapped virtual address of MMIO. */
/* UART with IRQ line: interrupt-driven I/O. */
struct irqaction irqaction;
+#ifdef CONFIG_ARM
+ struct vuart_info vuart;
+#endif
/* UART with no IRQ line: periodically-polled I/O. */
struct timer timer;
struct timer resume_timer;
unsigned int timeout_ms;
bool_t intr_works;
+#ifdef HAS_PCI
/* PCI card parameters. */
unsigned int pb_bdf[3]; /* pci bridge BDF */
unsigned int ps_bdf[3]; /* pci serial port BDF */
@@ -57,22 +70,51 @@ static struct ns16550 {
u32 bar;
u16 cr;
u8 bar_idx;
+#endif
+#ifdef HAS_DEVICE_TREE
+ struct dt_irq dt_irq;
+#endif
} ns16550_com[2] = { { 0 } };
static void ns16550_delayed_resume(void *data);
static char ns_read_reg(struct ns16550 *uart, int reg)
{
+ void __iomem *addr = uart->remapped_io_base + (reg << uart->reg_shift);
+#ifdef HAS_IOPORTS
if ( uart->remapped_io_base == NULL )
return inb(uart->io_base + reg);
- return readb(uart->remapped_io_base + reg);
+#endif
+ switch ( uart->reg_width )
+ {
+ case 1:
+ return readb(addr);
+ case 4:
+ return readl(addr);
+ default:
+ return 0xff;
+ }
}
static void ns_write_reg(struct ns16550 *uart, int reg, char c)
{
+ void __iomem *addr = uart->remapped_io_base + (reg << uart->reg_shift);
+#ifdef HAS_IOPORTS
if ( uart->remapped_io_base == NULL )
return outb(c, uart->io_base + reg);
- writeb(c, uart->remapped_io_base + reg);
+#endif
+ switch ( uart->reg_width )
+ {
+ case 1:
+ writeb(c, addr);
+ break;
+ case 4:
+ writel(c, addr);
+ break;
+ default:
+ /* Ignored */
+ break;
+ }
}
static int ns16550_ioport_invalid(struct ns16550 *uart)
@@ -163,9 +205,10 @@ static int ns16550_getc(struct serial_port *port, char *pc)
static void pci_serial_early_init(struct ns16550 *uart)
{
+#ifdef HAS_PCI
if ( !uart->ps_bdf_enable || uart->io_base >= 0x10000 )
return;
-
+
if ( uart->pb_bdf_enable )
pci_conf_write16(0, uart->pb_bdf[0], uart->pb_bdf[1], uart->pb_bdf[2],
PCI_IO_BASE,
@@ -177,6 +220,7 @@ static void pci_serial_early_init(struct ns16550 *uart)
uart->io_base | PCI_BASE_ADDRESS_SPACE_IO);
pci_conf_write16(0, uart->ps_bdf[0], uart->ps_bdf[1], uart->ps_bdf[2],
PCI_COMMAND, PCI_COMMAND_IO);
+#endif
}
static void ns16550_setup_preirq(struct ns16550 *uart)
@@ -223,8 +267,10 @@ static void __init ns16550_init_preirq(struct serial_port
*port)
{
struct ns16550 *uart = port->uart;
+#ifdef HAS_IOPORTS
/* I/O ports are distinguished by their size (16 bits). */
if ( uart->io_base >= 0x10000 )
+#endif
{
#ifdef CONFIG_X86
enum fixed_addresses idx = FIX_COM_BEGIN + (uart - ns16550_com);
@@ -233,7 +279,7 @@ static void __init ns16550_init_preirq(struct serial_port
*port)
uart->remapped_io_base = (void __iomem *)fix_to_virt(idx);
uart->remapped_io_base += uart->io_base & ~PAGE_MASK;
#else
- uart->remapped_io_base = (char *)ioremap(uart->io_base, 8);
+ uart->remapped_io_base = (char *)ioremap(uart->io_base, uart->io_size);
#endif
}
@@ -284,15 +330,22 @@ static void __init ns16550_init_postirq(struct
serial_port *port)
uart->irqaction.handler = ns16550_interrupt;
uart->irqaction.name = "ns16550";
uart->irqaction.dev_id = port;
+#ifdef HAS_DEVICE_TREE
+ if ( (rc = setup_dt_irq(&uart->dt_irq, &uart->irqaction)) != 0 )
+ printk("ERROR: Failed to allocate ns16550 DT IRQ.\n");
+#else
if ( (rc = setup_irq(uart->irq, &uart->irqaction)) != 0 )
printk("ERROR: Failed to allocate ns16550 IRQ %d\n", uart->irq);
+#endif
}
ns16550_setup_postirq(uart);
+#ifdef HAS_PCI
if ( uart->bar || uart->ps_bdf_enable )
pci_hide_device(uart->ps_bdf[0], PCI_DEVFN(uart->ps_bdf[1],
uart->ps_bdf[2]));
+#endif
}
static void ns16550_suspend(struct serial_port *port)
@@ -301,13 +354,16 @@ static void ns16550_suspend(struct serial_port *port)
stop_timer(&uart->timer);
+#ifdef HAS_PCI
if ( uart->bar )
uart->cr = pci_conf_read16(0, uart->ps_bdf[0], uart->ps_bdf[1],
uart->ps_bdf[2], PCI_COMMAND);
+#endif
}
static void _ns16550_resume(struct serial_port *port)
{
+#ifdef HAS_PCI
struct ns16550 *uart = port->uart;
if ( uart->bar )
@@ -317,6 +373,7 @@ static void _ns16550_resume(struct serial_port *port)
pci_conf_write16(0, uart->ps_bdf[0], uart->ps_bdf[1], uart->ps_bdf[2],
PCI_COMMAND, uart->cr);
}
+#endif
ns16550_setup_preirq(port->uart);
ns16550_setup_postirq(port->uart);
@@ -360,19 +417,17 @@ static void ns16550_resume(struct serial_port *port)
_ns16550_resume(port);
}
-#ifdef CONFIG_X86
static void __init ns16550_endboot(struct serial_port *port)
{
+#ifdef HAS_IOPORTS
struct ns16550 *uart = port->uart;
if ( uart->remapped_io_base )
return;
if ( ioports_deny_access(dom0, uart->io_base, uart->io_base + 7) != 0 )
BUG();
-}
-#else
-#define ns16550_endboot NULL
#endif
+}
static int __init ns16550_irq(struct serial_port *port)
{
@@ -380,6 +435,23 @@ static int __init ns16550_irq(struct serial_port *port)
return ((uart->irq > 0) ? uart->irq : -1);
}
+#ifdef HAS_DEVICE_TREE
+static const struct dt_irq __init *ns16550_dt_irq(struct serial_port *port)
+{
+ struct ns16550 *uart = port->uart;
+ return &uart->dt_irq;
+}
+#endif
+
+#ifdef CONFIG_ARM
+static const struct vuart_info *ns16550_vuart_info(struct serial_port *port)
+{
+ struct ns16550 *uart = port->uart;
+
+ return &uart->vuart;
+}
+#endif
+
static struct uart_driver __read_mostly ns16550_driver = {
.init_preirq = ns16550_init_preirq,
.init_postirq = ns16550_init_postirq,
@@ -389,7 +461,13 @@ static struct uart_driver __read_mostly ns16550_driver = {
.tx_ready = ns16550_tx_ready,
.putc = ns16550_putc,
.getc = ns16550_getc,
- .irq = ns16550_irq
+ .irq = ns16550_irq,
+#ifdef HAS_DEVICE_TREE
+ .dt_irq_get = ns16550_dt_irq,
+#endif
+#ifdef CONFIG_ARM
+ .vuart_info = ns16550_vuart_info,
+#endif
};
static int __init parse_parity_char(int c)
@@ -414,15 +492,21 @@ static int __init check_existence(struct ns16550 *uart)
{
unsigned char status, scratch, scratch2, scratch3;
+#ifdef HAS_IO_PORTS
/*
* We can't poke MMIO UARTs until they get I/O remapped later. Assume that
* if we're getting MMIO UARTs, the arch code knows what it's doing.
*/
if ( uart->io_base >= 0x10000 )
return 1;
+#else
+ return 1; /* Everything is MMIO */
+#endif
+#ifdef HAS_PCI
pci_serial_early_init(uart);
-
+#endif
+
/*
* Do a simple existence test first; if we fail this,
* there's no point trying anything else.
@@ -450,6 +534,7 @@ static int __init check_existence(struct ns16550 *uart)
return (status == 0x90);
}
+#ifdef HAS_PCI
static int
pci_uart_config (struct ns16550 *uart, int skip_amt, int bar_idx)
{
@@ -518,6 +603,7 @@ pci_uart_config (struct ns16550 *uart, int skip_amt, int
bar_idx)
return 0;
}
+#endif
#define PARSE_ERR(_f, _a...) \
do { \
@@ -564,6 +650,7 @@ static void __init ns16550_parse_port_config(
if ( *conf == ',' && *++conf != ',' )
{
+#ifdef HAS_PCI
if ( strncmp(conf, "pci", 3) == 0 )
{
if ( pci_uart_config(uart, 1/* skip AMT */, uart - ns16550_com) )
@@ -577,6 +664,7 @@ static void __init ns16550_parse_port_config(
conf += 3;
}
else
+#endif
{
uart->io_base = simple_strtoul(conf, &conf, 0);
}
@@ -585,6 +673,7 @@ static void __init ns16550_parse_port_config(
if ( *conf == ',' && *++conf != ',' )
uart->irq = simple_strtol(conf, &conf, 10);
+#ifdef HAS_PCI
if ( *conf == ',' && *++conf != ',' )
{
conf = parse_pci(conf, NULL, &uart->ps_bdf[0],
@@ -601,6 +690,7 @@ static void __init ns16550_parse_port_config(
PARSE_ERR("Bad bridge PCI coordinates");
uart->pb_bdf_enable = 1;
}
+#endif
config_parsed:
/* Sanity checks. */
@@ -638,12 +728,91 @@ void __init ns16550_init(int index, struct
ns16550_defaults *defaults)
uart->stop_bits = defaults->stop_bits;
uart->irq = defaults->irq;
uart->io_base = defaults->io_base;
+ uart->io_size = 8;
+ uart->reg_width = 1;
+ uart->reg_shift = 0;
+
/* Default is no transmit FIFO. */
uart->fifo_size = 1;
ns16550_parse_port_config(uart, (index == 0) ? opt_com1 : opt_com2);
}
+#ifdef HAS_DEVICE_TREE
+static int __init ns16550_uart_dt_init(struct dt_device_node *dev,
+ const void *data)
+{
+ struct ns16550 *uart;
+ int res;
+ u32 reg_shift, reg_width;
+ u64 io_size;
+
+ uart = &ns16550_com[0];
+
+ uart->baud = BAUD_AUTO;
+ uart->clock_hz = UART_CLOCK_HZ;
+ uart->data_bits = 8;
+ uart->parity = UART_PARITY_NONE;
+ uart->stop_bits = 1;
+ /* Default is no transmit FIFO. */
+ uart->fifo_size = 1;
+
+ res = dt_device_get_address(dev, 0, &uart->io_base, &io_size);
+ if ( res )
+ return res;
+
+ uart->io_size = io_size;
+
+ ASSERT(uart->io_size == io_size); /* Detect truncation */
+
+ res = dt_property_read_u32(dev, "reg-shift", ®_shift);
+ if ( !res )
+ uart->reg_shift = 0;
+ else
+ uart->reg_shift = reg_shift;
+
+ res = dt_property_read_u32(dev, "reg-io-width", ®_width);
+ if ( !res )
+ uart->reg_width = 1;
+ else
+ uart->reg_width = reg_width;
+
+ if ( uart->reg_width != 1 && uart->reg_width != 4 )
+ return -EINVAL;
+
+ res = dt_device_get_irq(dev, 0, &uart->dt_irq);
+ if ( res )
+ return res;
+
+ /* The common bit of the driver mostly deals with irq not dt_irq. */
+ uart->irq = uart->dt_irq.irq;
+
+ uart->vuart.base_addr = uart->io_base;
+ uart->vuart.size = uart->io_size;
+ uart->vuart.data_off = UART_THR <<uart->reg_shift;
+ uart->vuart.status_off = UART_LSR<<uart->reg_shift;
+ uart->vuart.status = UART_LSR_THRE|UART_LSR_TEMT;
+
+ /* Register with generic serial driver. */
+ serial_register_uart(uart - ns16550_com, &ns16550_driver, uart);
+
+ dt_device_set_used_by(dev, DOMID_XEN);
+
+ return 0;
+}
+
+static const char const *ns16550_dt_compat[] __initconst =
+{
+ "ns16550",
+ NULL
+};
+
+DT_DEVICE_START(ns16550, "NS16550 UART", DEVICE_SERIAL)
+ .compatible = ns16550_dt_compat,
+ .init = ns16550_uart_dt_init,
+DT_DEVICE_END
+
+#endif /* HAS_DEVICE_TREE */
/*
* Local variables:
* mode: C
--
generated by git-patchbot for /home/xen/git/xen.git#master
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |