[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen master] x86/HPET: basic cleanup



commit 081c4d400db24790b43ce344e6b5449b0800c253
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Tue Oct 8 11:09:22 2013 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Oct 8 11:09:22 2013 +0200

    x86/HPET: basic cleanup
    
    * Strip trailing whitespace
    * Remove redundant definitions
    * Update stale documentation links
    * Move hpet_address into __initdata
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
 xen/arch/x86/hpet.c        |    6 +++---
 xen/arch/x86/hvm/hpet.c    |   18 +++++++++---------
 xen/include/asm-x86/hpet.h |    6 ++----
 3 files changed, 14 insertions(+), 16 deletions(-)

diff --git a/xen/arch/x86/hpet.c b/xen/arch/x86/hpet.c
index 7e0d332..99882b1 100644
--- a/xen/arch/x86/hpet.c
+++ b/xen/arch/x86/hpet.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  * arch/x86/hpet.c
- * 
+ *
  * HPET management.
  */
 
@@ -50,7 +50,7 @@ static unsigned int __read_mostly num_hpets_used;
 
 DEFINE_PER_CPU(struct hpet_event_channel *, cpu_bc_channel);
 
-unsigned long __read_mostly hpet_address;
+unsigned long __initdata hpet_address;
 u8 __initdata hpet_blockid;
 
 /*
@@ -540,7 +540,7 @@ static void handle_rtc_once(uint8_t index, uint8_t value)
 {
     if ( index != RTC_REG_B )
         return;
-    
+
     /* RTC Reg B, contain PIE/AIE/UIE */
     if ( value & (RTC_PIE | RTC_AIE | RTC_UIE ) )
     {
diff --git a/xen/arch/x86/hvm/hpet.c b/xen/arch/x86/hvm/hpet.c
index 4b4b905..4324b52 100644
--- a/xen/arch/x86/hvm/hpet.c
+++ b/xen/arch/x86/hvm/hpet.c
@@ -47,7 +47,7 @@
 
 /* can be routed to IOAPIC.redirect_table[23..20] */
 #define HPET_TN_INT_ROUTE_CAP      (0x00f00000ULL \
-                    << HPET_TN_INT_ROUTE_CAP_SHIFT) 
+                    << HPET_TN_INT_ROUTE_CAP_SHIFT)
 
 #define HPET_TN_INT_ROUTE_CAP_MASK (0xffffffffULL \
                     << HPET_TN_INT_ROUTE_CAP_SHIFT)
@@ -79,7 +79,7 @@ static inline uint64_t hpet_read_maincounter(HPETState *h)
 
     if ( hpet_enabled(h) )
         return guest_time_hpet(h) + h->mc_offset;
-    else 
+    else
         return h->hpet.mc64;
 }
 
@@ -100,7 +100,7 @@ static uint64_t hpet_get_comparator(HPETState *h, unsigned 
int tn)
             h->hpet.comparator64[tn] = comparator;
         }
     }
-    
+
     /* truncate if timer is in 32 bit mode */
     if ( timer_is_32bit(h, tn) )
         comparator = (uint32_t)comparator;
@@ -249,7 +249,7 @@ static void hpet_set_timer(HPETState *h, unsigned int tn)
         irq = timer_int_route(h, tn);
 
     /*
-     * diff is the time from now when the timer should fire, for a periodic 
+     * diff is the time from now when the timer should fire, for a periodic
      * timer we also need the period which may be different because time may
      * have elapsed between the time the comparator was written and the timer
      * being enabled (now).
@@ -331,7 +331,7 @@ static int hpet_write(
         h->hpet.mc64 = new_val;
         if ( hpet_enabled(h) )
         {
-            gdprintk(XENLOG_WARNING, 
+            gdprintk(XENLOG_WARNING,
                      "HPET: writing main counter but it's not halted!\n");
             for ( i = 0; i < HPET_TIMER_NUM; i++ )
                 if ( timer_enabled(h, i) )
@@ -396,7 +396,7 @@ static int hpet_write(
              * timer's accumulator."  That is, set the comparator without
              * adjusting the period.  Much the same as just setting the
              * comparator on an enabled one-shot timer.
-             * 
+             *
              * This configuration bit clears when the comparator is written.
              */
             h->hpet.timers[tn].config &= ~HPET_TN_SETVAL;
@@ -553,7 +553,7 @@ static int hpet_load(struct domain *d, hvm_domain_context_t 
*h)
         hp->hpet.timers[i].cmp = cmp;
     }
 #undef C
-    
+
     /* Recalculate the offset between the main counter and guest time */
     hp->mc_offset = hp->hpet.mc64 - guest_time_hpet(hp);
 
@@ -563,7 +563,7 @@ static int hpet_load(struct domain *d, hvm_domain_context_t 
*h)
         for ( i = 0; i < HPET_TIMER_NUM; i++ )
             if ( timer_enabled(hp, i) )
                 hpet_set_timer(hp, i);
- 
+
     spin_unlock(&hp->lock);
 
     return 0;
@@ -595,7 +595,7 @@ void hpet_init(struct vcpu *v)
 
     for ( i = 0; i < HPET_TIMER_NUM; i++ )
     {
-        h->hpet.timers[i].config = 
+        h->hpet.timers[i].config =
             HPET_TN_INT_ROUTE_CAP | HPET_TN_64BIT_CAP | HPET_TN_PERIODIC_CAP;
         h->hpet.timers[i].cmp = ~0ULL;
         h->pt[i].source = PTSRC_isa;
diff --git a/xen/include/asm-x86/hpet.h b/xen/include/asm-x86/hpet.h
index 98c1237..875f1de 100644
--- a/xen/include/asm-x86/hpet.h
+++ b/xen/include/asm-x86/hpet.h
@@ -3,8 +3,8 @@
 
 /*
  * Documentation on HPET can be found at:
- *      http://www.intel.com/ial/home/sp/pcmmspec.htm
- *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ *      http://www.intel.com/content/dam/www/public/us/en/documents/
+ *      technical-specifications/software-developers-hpet-spec-1-0a.pdf
  */
 
 #define HPET_MMAP_SIZE 1024
@@ -24,9 +24,7 @@
 #define HPET_ID_NUMBER 0x00001f00
 #define HPET_ID_REV    0x000000ff
 #define        HPET_ID_NUMBER_SHIFT    8
-
 #define HPET_ID_VENDOR_SHIFT   16
-#define HPET_ID_VENDOR_8086    0x8086
 
 #define HPET_CFG_ENABLE        0x001
 #define HPET_CFG_LEGACY        0x002
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.