[Xen-changelog] [xen master] xen: arm: increase priority of SGIs used as IPIs

[patchbot@xxxxxxx]

commit 8ccfba815c21c5188cfebb800e7c82bbd98b967c
Author:     Ian Campbell <ian.campbell@xxxxxxxxxx>
AuthorDate: Mon Mar 17 11:31:02 2014 +0000
Commit:     Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Mon Mar 17 12:47:48 2014 +0000

    xen: arm: increase priority of SGIs used as IPIs
    
    Code such as on_selected_cpus expects/requires that an IPI can preempt a
    processor which is just handling a normal interrupt. Lacking this property 
can
    result in a deadlock between two CPUs trying to IPI each other from 
interrupt
    context.
    
    For the time being there is only two priorities, IRQ and IPI, although it is
    also conceivable that in the future some IPIs might be higher priority than
    others. This could be used to implement a better BUG() than we have now, 
but I
    haven't tackled that yet.
    
    Tested with a debug patch which sends a local IPI from a keyhandler, which 
is
    run in serial interrupt context.
    
    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Acked-by: Julien Grall <julien.grall@xxxxxxxxxx>
    Cc: Oleksandr Tyshchenko <oleksandr.tyshchenko@xxxxxxxxxxxxxxx>
---
 xen/arch/arm/gic.c        |   22 +++++++++++++++-------
 xen/arch/arm/time.c       |    6 +++---
 xen/include/asm-arm/gic.h |   22 ++++++++++++++++++++++
 3 files changed, 40 insertions(+), 10 deletions(-)

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index d028e30..91a2982 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -322,7 +322,8 @@ static void __init gic_dist_init(void)
 
     /* Default priority for global interrupts */
     for ( i = 32; i < gic.lines; i += 4 )
-        GICD[GICD_IPRIORITYR + i / 4] = 0xa0a0a0a0;
+        GICD[GICD_IPRIORITYR + i / 4] =
+            GIC_PRI_IRQ<<24 | GIC_PRI_IRQ<<16 | GIC_PRI_IRQ<<8 | GIC_PRI_IRQ;
 
     /* Disable all global interrupts */
     for ( i = 32; i < gic.lines; i += 32 )
@@ -343,9 +344,14 @@ static void __cpuinit gic_cpu_init(void)
      * be set up here with the other per-cpu state. */
     GICD[GICD_ICENABLER] = 0xffff0000; /* Disable all PPI */
     GICD[GICD_ISENABLER] = 0x0000ffff; /* Enable all SGI */
-    /* Set PPI and SGI priorities */
-    for (i = 0; i < 32; i += 4)
-        GICD[GICD_IPRIORITYR + i / 4] = 0xa0a0a0a0;
+    /* Set SGI priorities */
+    for (i = 0; i < 16; i += 4)
+        GICD[GICD_IPRIORITYR + i / 4] =
+            GIC_PRI_IPI<<24 | GIC_PRI_IPI<<16 | GIC_PRI_IPI<<8 | GIC_PRI_IPI;
+    /* Set PPI priorities */
+    for (i = 16; i < 32; i += 4)
+        GICD[GICD_IPRIORITYR + i / 4] =
+            GIC_PRI_IRQ<<24 | GIC_PRI_IRQ<<16 | GIC_PRI_IRQ<<8 | GIC_PRI_IRQ;
 
     /* Local settings: interface controller */
     GICC[GICC_PMR] = 0xff;                /* Don't mask by priority */
@@ -541,7 +547,8 @@ void gic_disable_cpu(void)
 void gic_route_ppis(void)
 {
     /* GIC maintenance */
-    gic_route_dt_irq(&gic.maintenance, cpumask_of(smp_processor_id()), 0xa0);
+    gic_route_dt_irq(&gic.maintenance, cpumask_of(smp_processor_id()),
+                     GIC_PRI_IRQ);
     /* Route timer interrupt */
     route_timer_interrupt();
 }
@@ -556,7 +563,8 @@ void gic_route_spis(void)
         if ( (irq = serial_dt_irq(seridx)) == NULL )
             continue;
 
-        gic_route_dt_irq(irq, cpumask_of(smp_processor_id()), 0xa0);
+        gic_route_dt_irq(irq, cpumask_of(smp_processor_id()),
+                         GIC_PRI_IRQ);
     }
 }
 
@@ -779,7 +787,7 @@ int gic_route_irq_to_guest(struct domain *d, const struct 
dt_irq *irq,
     level = dt_irq_is_level_triggered(irq);
 
     gic_set_irq_properties(irq->irq, level, cpumask_of(smp_processor_id()),
-                           0xa0);
+                           GIC_PRI_IRQ);
 
     retval = __setup_irq(desc, irq->irq, action);
     if (retval) {
diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index 22e94bb..ba281e9 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -222,11 +222,11 @@ static void vtimer_interrupt(int irq, void *dev_id, 
struct cpu_user_regs *regs)
 void __cpuinit route_timer_interrupt(void)
 {
     gic_route_dt_irq(&timer_irq[TIMER_PHYS_NONSECURE_PPI],
-                     cpumask_of(smp_processor_id()), 0xa0);
+                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
     gic_route_dt_irq(&timer_irq[TIMER_HYP_PPI],
-                     cpumask_of(smp_processor_id()), 0xa0);
+                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
     gic_route_dt_irq(&timer_irq[TIMER_VIRT_PPI],
-                     cpumask_of(smp_processor_id()), 0xa0);
+                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
 }
 
 /* Set up the timer interrupt on this CPU */
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 87f4298..071280b 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -129,6 +129,28 @@
 #define GICH_LR_CPUID_SHIFT     9
 #define GICH_VTR_NRLRGS         0x3f
 
+/*
+ * The minimum GICC_BPR is required to be in the range 0-3. We set
+ * GICC_BPR to 0 but we must expect that it might be 3. This means we
+ * can rely on premption between the following ranges:
+ * 0xf0..0xff
+ * 0xe0..0xdf
+ * 0xc0..0xcf
+ * 0xb0..0xbf
+ * 0xa0..0xaf
+ * 0x90..0x9f
+ * 0x80..0x8f
+ *
+ * Priorities within a range will not preempt each other.
+ *
+ * A GIC must support a mimimum of 16 priority levels.
+ */
+#define GIC_PRI_LOWEST     0xf0
+#define GIC_PRI_IRQ        0xa0
+#define GIC_PRI_IPI        0x90 /* IPIs must preempt normal interrupts */
+#define GIC_PRI_HIGHEST    0x80 /* Higher priorities belong to Secure-World */
+
+
 #ifndef __ASSEMBLY__
 #include <xen/device_tree.h>
 
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog