[Xen-changelog] [xen stable-4.4] tools: arm: improve placement of initial modules.

[patchbot@xxxxxxx]

commit 5e6c1c306330ceeb12d3bd2315db86de76bf0e36
Author:     Ian Campbell <ian.campbell@xxxxxxxxxx>
AuthorDate: Wed Apr 9 12:51:14 2014 +0100
Commit:     Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>
CommitDate: Thu May 22 17:06:19 2014 +0100

    tools: arm: improve placement of initial modules.
    
    314c9815e2f5 "tools: implement initial ramdisk support for ARM." broke 
starting
    guests with <= 128 MB ram by placing the boot modules (dtb and initrd)
    immediately after the kernel in this case, running the risk of them being
    overwritten. Instead place the modules at the end of RAM, as the hypervisor
    does for dom0.
    
    The hypervisor also falls back to placing things before the kernel as a last
    resort before failing, so add that here too.
    
    Tested with the Debian installer initrd and guests of 96MB, 128MB, 256MB and
    1GB. All work, also tested with 64MB but the installer doesn't run with so
    little RAM (but our placement of the initrd is correct).
    
    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Acked-by: Julien Grall <julien.grall@xxxxxxxxxx>
    Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
    (cherry picked from commit 6f4ff742a5caa411397fc38233f818e64a0c541c)
---
 tools/libxc/xc_dom_arm.c |   29 +++++++++++++++++++++--------
 1 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/tools/libxc/xc_dom_arm.c b/tools/libxc/xc_dom_arm.c
index f051515..60ac51a 100644
--- a/tools/libxc/xc_dom_arm.c
+++ b/tools/libxc/xc_dom_arm.c
@@ -253,8 +253,11 @@ int arch_setup_meminit(struct xc_dom_image *dom)
 
     /* Convenient */
     const uint64_t rambase = dom->rambase_pfn << XC_PAGE_SHIFT;
-    const uint64_t ramend = rambase + ( dom->total_pages << XC_PAGE_SHIFT );
+    const uint64_t ramsize = dom->total_pages << XC_PAGE_SHIFT;
+    const uint64_t ramend = rambase + ramsize;
+    const uint64_t kernbase = dom->kernel_seg.vstart;
     const uint64_t kernend = ROUNDUP(dom->kernel_seg.vend, 21/*2MB*/);
+    const uint64_t kernsize = kernend - kernbase;
     const uint64_t dtb_size = dom->devicetree_blob ?
         ROUNDUP(dom->devicetree_size, XC_PAGE_SHIFT) : 0;
     const uint64_t ramdisk_size = dom->ramdisk_blob ?
@@ -262,6 +265,13 @@ int arch_setup_meminit(struct xc_dom_image *dom)
     const uint64_t modsize = dtb_size + ramdisk_size;
     const uint64_t ram128mb = rambase + (128<<20);
 
+    if ( modsize + kernsize > ramsize )
+    {
+        DOMPRINTF("%s: Not enough memory for the kernel+dtb+initrd",
+                  __FUNCTION__);
+        return -1;
+    }
+
     rc = set_mode(dom->xch, dom->guest_domid, dom->guest_type);
     if ( rc )
         return rc;
@@ -290,17 +300,20 @@ int arch_setup_meminit(struct xc_dom_image *dom)
             0, 0, &dom->p2m_host[i]);
     }
 
-
     /*
-     * Place boot modules at 128MB into RAM if there is enough RAM and
-     * the kernel does not overlap. Otherwise place them immediately
-     * after the kernel. If there is no space after the kernel then
-     * there is insufficient RAM and we fail.
+     * We try to place dtb+initrd at 128MB or if we have less RAM
+     * as high as possible. If there is no space then fallback to
+     * just before the kernel.
+     *
+     * If changing this then consider
+     * xen/arch/arm/kernel.c:place_modules as well.
      */
     if ( ramend >= ram128mb + modsize && kernend < ram128mb )
         modbase = ram128mb;
-    else if ( ramend >= kernend + modsize )
-        modbase = kernend;
+    else if ( ramend - modsize > kernend )
+        modbase = ramend - modsize;
+    else if (kernbase - rambase > modsize )
+        modbase = kernbase - modsize;
     else
         return -1;
 
--
generated by git-patchbot for /home/xen/git/xen.git#stable-4.4

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog