[Xen-changelog] [xen master] VT-d/ATS: correct and clean up dev_invalidate_iotlb()

[patchbot@xxxxxxx]

commit fd33987ba27607c3cc7da258cf1d86d21beeb735
Author:     Jan Beulich <jbeulich@xxxxxxxx>
AuthorDate: Mon Jun 30 15:57:40 2014 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Mon Jun 30 15:57:40 2014 +0200

    VT-d/ATS: correct and clean up dev_invalidate_iotlb()
    
    While this was intended to only do cleanup (replace the two bogus
    "ret |= " constructs, and a simple formatting correction), this now
    also
    - fixes the bit manipulations for size_order > 0
      a) correct an off-by-one in the use of size_order for shifting (till
         now double the requested size got invalidated)
      b) in fact setting bit 12 and up if necessary (without which too
         small a region might have got invalidated)
      c) making them capable of dealing with regions of 4Gb size and up
    - corrects the return value handling, such that a later iteration's
      success won't clear an earlier iteration's error indication
    - uses PCI_BDF2() instead of open coding it
    - bail immediately on bad passed in invalidation type, rather than
      repeatedly printing the same message for each ATS-capable device, at
      once also no longer hiding that failure from the caller
    
    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Acked-by: Yang Zhang <yang.z.zhang@xxxxxxxxx>
---
 xen/drivers/passthrough/vtd/x86/ats.c |   33 ++++++++++++++++++++-------------
 1 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/xen/drivers/passthrough/vtd/x86/ats.c 
b/xen/drivers/passthrough/vtd/x86/ats.c
index ea57d7d..6b0632b 100644
--- a/xen/drivers/passthrough/vtd/x86/ats.c
+++ b/xen/drivers/passthrough/vtd/x86/ats.c
@@ -110,21 +110,23 @@ int dev_invalidate_iotlb(struct iommu *iommu, u16 did,
     u64 addr, unsigned int size_order, u64 type)
 {
     struct pci_ats_dev *pdev;
-    int sbit, ret = 0;
-    u16 sid;
+    int ret = 0;
 
     if ( !ecap_dev_iotlb(iommu->ecap) )
         return ret;
 
     list_for_each_entry( pdev, &ats_devices, list )
     {
-        sid = (pdev->bus << 8) | pdev->devfn;
+        u16 sid = PCI_BDF2(pdev->bus, pdev->devfn);
+        bool_t sbit;
+        int rc = 0;
 
         /* Only invalidate devices that belong to this IOMMU */
         if ( pdev->iommu != iommu )
             continue;
 
-        switch ( type ) {
+        switch ( type )
+        {
         case DMA_TLB_DSI_FLUSH:
             if ( !device_in_domain(iommu, pdev, did) )
                 break;
@@ -133,32 +135,37 @@ int dev_invalidate_iotlb(struct iommu *iommu, u16 did,
             /* invalidate all translations: sbit=1,bit_63=0,bit[62:12]=1 */
             sbit = 1;
             addr = (~0 << PAGE_SHIFT_4K) & 0x7FFFFFFFFFFFFFFF;
-            ret |= qinval_device_iotlb(iommu, pdev->ats_queue_depth,
-                                       sid, sbit, addr);
+            rc = qinval_device_iotlb(iommu, pdev->ats_queue_depth,
+                                     sid, sbit, addr);
             break;
         case DMA_TLB_PSI_FLUSH:
             if ( !device_in_domain(iommu, pdev, did) )
                 break;
 
-            addr &= ~0 << (PAGE_SHIFT + size_order);
-
             /* if size <= 4K, set sbit = 0, else set sbit = 1 */
             sbit = size_order ? 1 : 0;
 
             /* clear lower bits */
-            addr &= (~0 << (PAGE_SHIFT + size_order));
+            addr &= ~0 << PAGE_SHIFT_4K;
 
             /* if sbit == 1, zero out size_order bit and set lower bits to 1 */
             if ( sbit )
-                addr &= (~0  & ~(1 << (PAGE_SHIFT + size_order)));
+            {
+                addr &= ~((u64)PAGE_SIZE_4K << (size_order - 1));
+                addr |= (((u64)1 << (size_order - 1)) - 1) << PAGE_SHIFT_4K;
+            }
 
-            ret |= qinval_device_iotlb(iommu, pdev->ats_queue_depth,
-                                       sid, sbit, addr);
+            rc = qinval_device_iotlb(iommu, pdev->ats_queue_depth,
+                                     sid, sbit, addr);
             break;
         default:
             dprintk(XENLOG_WARNING VTDPREFIX, "invalid vt-d flush type\n");
-            break;
+            return -EOPNOTSUPP;
         }
+
+        if ( !ret )
+            ret = rc;
     }
+
     return ret;
 }
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog