[Xen-changelog] [xen master] xen: arm: correct whitespace/comments and use #defines in head.S

[patchbot@xxxxxxx]

commit 6e1776751ad1c6cdf8803be686f197526e1b5486
Author:     Ian Campbell <ian.campbell@xxxxxxxxxx>
AuthorDate: Mon Jul 21 13:59:55 2014 +0100
Commit:     Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Thu Jul 24 16:23:16 2014 +0100

    xen: arm: correct whitespace/comments and use #defines in head.S
    
    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Acked-by: Julien Grall <julien.grall@xxxxxxxxxx>
---
 xen/arch/arm/arm32/head.S |   11 +++++------
 xen/arch/arm/arm64/head.S |   15 +++++++--------
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index 73b97cb..51501dc 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -266,10 +266,10 @@ cpu_init_done:
         strd  r2, r3, [r4, #0]       /* Map it in slot 0 */
 
         /* ... map of paddr(start) in boot_pgtable */
-        lsrs  r1, r9, #30            /* Offset of base paddr in boot_pgtable */
+        lsrs  r1, r9, #FIRST_SHIFT   /* Offset of base paddr in boot_pgtable */
         beq   1f                     /* If it is in slot 0 then map in 
boot_second
                                       * later on */
-        lsl   r2, r1, #30            /* Base address for 1GB mapping */
+        lsl   r2, r1, #FIRST_SHIFT   /* Base address for 1GB mapping */
         orr   r2, r2, #PT_UPPER(MEM) /* r2:r3 := section map */
         orr   r2, r2, #PT_LOWER(MEM)
         lsl   r1, r1, #3             /* r1 := Slot offset */
@@ -277,7 +277,7 @@ cpu_init_done:
 
 1:      /* Setup boot_second: */
         ldr   r4, =boot_second
-        add   r4, r4, r10            /* r1 := paddr (boot_second) */
+        add   r4, r4, r10            /* r4 := paddr (boot_second) */
 
         lsr   r2, r9, #SECOND_SHIFT  /* Base address for 2MB mapping */
         lsl   r2, r2, #SECOND_SHIFT
@@ -320,7 +320,7 @@ paging:
         dsb
 #if defined(CONFIG_EARLY_PRINTK) /* Fixmap is only used by early printk */
         /* Non-boot CPUs don't need to rebuild the fixmap itself, just
-        * the mapping from boot_second to xen_fixmap */
+         * the mapping from boot_second to xen_fixmap */
         teq   r12, #0
         bne   1f
 
@@ -408,8 +408,7 @@ launch:
         beq   start_xen              /* and disappear into the land of C */
         b     start_secondary        /* (to the appropriate entry point) */
 
-/* Fail-stop
- * r0: string explaining why */
+/* Fail-stop */
 fail:   PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 7d53143..d46481b 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -267,11 +267,11 @@ skip_bss:
         str   x2, [x4, #0]           /* Map it in slot 0 */
 
         /* ... map of paddr(start) in boot_pgtable */
-        lsr   x1, x19, #39           /* Offset of base paddr in boot_pgtable */
+        lsr   x1, x19, #ZEROETH_SHIFT/* Offset of base paddr in boot_pgtable */
         cbz   x1, 1f                 /* It's in slot 0, map in boot_first
                                       * or boot_second later on */
 
-        lsl   x2, x1, #39            /* Base address for 512GB mapping */
+        lsl   x2, x1, #ZEROETH_SHIFT /* Base address for 512GB mapping */
         mov   x3, #PT_MEM            /* x2 := Section mapping */
         orr   x2, x2, x3
         lsl   x1, x1, #3             /* x1 := Slot offset */
@@ -284,7 +284,7 @@ skip_bss:
         /* ... map boot_second in boot_first[0] */
         ldr   x1, =boot_second
         add   x1, x1, x20            /* x1 := paddr(boot_second) */
-        mov   x3, #PT_PT             /* x2 := table map of boot_first */
+        mov   x3, #PT_PT             /* x2 := table map of boot_second */
         orr   x2, x1, x3             /*       + rights for linear PT */
         str   x2, [x4, #0]           /* Map it in slot 0 */
 
@@ -300,8 +300,8 @@ skip_bss:
         str   x2, [x4, x1]           /* Create mapping of paddr(start)*/
 
 1:      /* Setup boot_second: */
-        ldr   x4, =boot_second
-        add   x4, x4, x20            /* x4 := paddr (boot_second) */
+        ldr   x4, =boot_second       /* Next level into boot_second */
+        add   x4, x4, x20            /* x4 := paddr(boot_second) */
 
         lsr   x2, x19, #SECOND_SHIFT /* Base address for 2MB mapping */
         lsl   x2, x2, #SECOND_SHIFT
@@ -345,7 +345,7 @@ paging:
         dsb   sy
 #if defined(CONFIG_EARLY_PRINTK) /* Fixmap is only used by early printk */
         /* Non-boot CPUs don't need to rebuild the fixmap itself, just
-        * the mapping from boot_second to xen_fixmap */
+         * the mapping from boot_second to xen_fixmap */
         cbnz  x22, 1f
 
         /* Add UART to the fixmap table */
@@ -428,8 +428,7 @@ launch:
         cbz   x22, start_xen         /* and disappear into the land of C */
         b     start_secondary        /* (to the appropriate entry point) */
 
-/* Fail-stop
- * r0: string explaining why */
+/* Fail-stop */
 fail:   PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog