[Xen-changelog] [xen master] tools: remove references to xend-config.sxp

[patchbot@xxxxxxx]

commit e7b19a44441999e800540df4dadac1ca2deeff3e
Author:     Olaf Hering <olaf@xxxxxxxxx>
AuthorDate: Mon Oct 6 15:37:49 2014 +0200
Commit:     Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Wed Oct 8 13:38:21 2014 +0100

    tools: remove references to xend-config.sxp
    
    xend is gone. Remove references to its config file.
    Also remove python script sxp-pretty which relies on removed code.
    
    Signed-off-by: Olaf Hering <olaf@xxxxxxxxx>
    Cc: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
    Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
    Cc: Wei Liu <wei.liu2@xxxxxxxxxx>
    Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
---
 tools/examples/README               |    1 -
 tools/hotplug/Linux/vif-bridge      |    4 ---
 tools/hotplug/Linux/vif-nat         |    4 ---
 tools/hotplug/Linux/vif-openvswitch |    4 ---
 tools/hotplug/Linux/vif-route       |    4 ---
 tools/misc/sxp-pretty               |   37 -----------------------------------
 6 files changed, 0 insertions(+), 54 deletions(-)

diff --git a/tools/examples/README b/tools/examples/README
index 5916df3..115ca02 100644
--- a/tools/examples/README
+++ b/tools/examples/README
@@ -25,7 +25,6 @@ vif-route           - xen virtual network start/stop script 
in routed mode
 xen-backend.agent   - calls block, vif-* scripts to add, remove, hotplug
                       devices  
 xen-backend.rules   - hotplug script rules
-xend-config.sxp     - default xend configuration file
 xen-hotplug-common.sh - sourced by vif-common.sh
 xen-network-common.sh - sourced by vif-common.sh
 xen-script-common.sh  - sourced by xen-hotplug-common.sh
diff --git a/tools/hotplug/Linux/vif-bridge b/tools/hotplug/Linux/vif-bridge
index df44789..3d72ca4 100644
--- a/tools/hotplug/Linux/vif-bridge
+++ b/tools/hotplug/Linux/vif-bridge
@@ -3,10 +3,6 @@
 # ${XEN_SCRIPT_DIR}/vif-bridge
 #
 # Script for configuring a vif in bridged mode.
-# The hotplugging system will call this script if it is specified either in
-# the device configuration given to Xend, or the default Xend configuration
-# in ${XEN_CONFIG_DIR}/xend-config.sxp.  If the script is specified in
-# neither of those places, then this script is the default.
 #
 # Usage:
 # vif-bridge (add|remove|online|offline)
diff --git a/tools/hotplug/Linux/vif-nat b/tools/hotplug/Linux/vif-nat
index 0b900d5..a76d9c7 100644
--- a/tools/hotplug/Linux/vif-nat
+++ b/tools/hotplug/Linux/vif-nat
@@ -3,10 +3,6 @@
 # ${XEN_SCRIPT_DIR}/vif-nat
 #
 # Script for configuring a vif in routed-nat mode.
-# The hotplugging system will call this script if it is specified either in
-# the device configuration given to Xend, or the default Xend configuration
-# in ${XEN_CONFIG_DIR}/xend-config.sxp.  If the script is specified in
-# neither of those places, then vif-bridge is the default.
 #
 # Usage:
 # vif-nat (add|remove|online|offline)
diff --git a/tools/hotplug/Linux/vif-openvswitch 
b/tools/hotplug/Linux/vif-openvswitch
index a8e4fc7..18bfb6c 100644
--- a/tools/hotplug/Linux/vif-openvswitch
+++ b/tools/hotplug/Linux/vif-openvswitch
@@ -3,10 +3,6 @@
 # ${XEN_SCRIPT_DIR}/vif-openvswitch
 #
 # Script for configuring a vif in openvswitch mode.
-# The hotplugging system will call this script if it is specified either in
-# the device configuration given to Xend, or the default Xend configuration
-# in ${XEN_CONFIG_DIR}/xend-config.sxp.  If the script is specified in
-# neither of those places, then this script is the default.
 #
 # Usage:
 # vif-openvswitch (add|remove|online|offline)
diff --git a/tools/hotplug/Linux/vif-route b/tools/hotplug/Linux/vif-route
index 02f1403..c149ffc 100644
--- a/tools/hotplug/Linux/vif-route
+++ b/tools/hotplug/Linux/vif-route
@@ -3,10 +3,6 @@
 # ${XEN_SCRIPT_DIR}/vif-route
 #
 # Script for configuring a vif in routed mode.
-# The hotplugging system will call this script if it is specified either in
-# the device configuration given to Xend, or the default Xend configuration
-# in ${XEN_CONFIG_DIR}/xend-config.sxp.  If the script is specified in
-# neither of those places, then vif-bridge is the default.
 #
 # Usage:
 # vif-route (add|remove|online|offline)
diff --git a/tools/misc/sxp-pretty b/tools/misc/sxp-pretty
deleted file mode 100644
index dd642b0..0000000
--- a/tools/misc/sxp-pretty
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/env python
-#  -*- mode: python; -*-
-#============================================================================
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of version 2.1 of the GNU Lesser General Public
-# License as published by the Free Software Foundation.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-#============================================================================
-# Copyright (c) 2007 XenSource Inc.
-#============================================================================
-
-
-import commands
-import os.path
-import pprint
-import sys
-
-import xen.xend.sxp as sxp
-
-def main():
-    if len(sys.argv) == 1 or sys.argv[1] in ['', '-']:
-        s = sxp.parse(sys.stdin)
-    else:
-        s = sxp.parse(open(sys.argv[1]))
-
-    pprint.pprint(s)
-
-if __name__ == '__main__':
-    sys.exit(main())
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog