[Xen-changelog] [xen master] xen: arm: Support the other 4 PCI buses on Xgene

[patchbot@xxxxxxx]

commit d17405f8153f7419db680a183f10129410feca05
Author:     Ian Campbell <ian.campbell@xxxxxxxxxx>
AuthorDate: Wed Nov 19 15:28:15 2014 +0000
Commit:     Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Tue Nov 25 15:03:44 2014 +0000

    xen: arm: Support the other 4 PCI buses on Xgene
    
    Currently we only establish specific mappings for pcie0, which is
    used on the Mustang platform. However at least McDivitt uses pcie3.
    So wire up all the others, based on whether the corresponding DT node
    is marked as available.
    
    This results in no change for Mustang.
    
    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Reviewed-by: Julien Grall <julien.grall@xxxxxxxxxx>
    Acked-by: Pranavkumar Sawargaonkar <pranavkumar@xxxxxxxxxx>
---
 xen/arch/arm/platforms/xgene-storm.c |   89 +++++++++++++++++++++++++++++-----
 1 files changed, 76 insertions(+), 13 deletions(-)

diff --git a/xen/arch/arm/platforms/xgene-storm.c 
b/xen/arch/arm/platforms/xgene-storm.c
index 8c27f24..0b3492d 100644
--- a/xen/arch/arm/platforms/xgene-storm.c
+++ b/xen/arch/arm/platforms/xgene-storm.c
@@ -78,35 +78,35 @@ static int map_one_spi(struct domain *d, const char *what,
     return ret;
 }
 
-/*
- * Xen does not currently support mapping MMIO regions and interrupt
- * for bus child devices (referenced via the "ranges" and
- * "interrupt-map" properties to domain 0). Instead for now map the
- * necessary resources manually.
- */
-static int xgene_storm_specific_mapping(struct domain *d)
+/* Creates MMIO mappings base..end as well as 4 SPIs from the given base. */
+static int xgene_storm_pcie_specific_mapping(struct domain *d,
+                                             const struct dt_device_node *node,
+                                             paddr_t base, paddr_t end,
+                                             int base_spi)
 {
     int ret;
 
+    printk("Mapping additional regions for PCIe device %s\n",
+           dt_node_full_name(node));
+
     /* Map the PCIe bus resources */
-    ret = map_one_mmio(d, "PCI MEMORY", paddr_to_pfn(0x0e000000000UL),
-                                        paddr_to_pfn(0x01000000000UL));
+    ret = map_one_mmio(d, "PCI MEMORY", paddr_to_pfn(base), paddr_to_pfn(end));
     if ( ret )
         goto err;
 
-    ret = map_one_spi(d, "PCI#INTA", 0xc2, DT_IRQ_TYPE_LEVEL_HIGH);
+    ret = map_one_spi(d, "PCI#INTA", base_spi+0, DT_IRQ_TYPE_LEVEL_HIGH);
     if ( ret )
         goto err;
 
-    ret = map_one_spi(d, "PCI#INTB", 0xc3, DT_IRQ_TYPE_LEVEL_HIGH);
+    ret = map_one_spi(d, "PCI#INTB", base_spi+1, DT_IRQ_TYPE_LEVEL_HIGH);
     if ( ret )
         goto err;
 
-    ret = map_one_spi(d, "PCI#INTC", 0xc4, DT_IRQ_TYPE_LEVEL_HIGH);
+    ret = map_one_spi(d, "PCI#INTC", base_spi+2, DT_IRQ_TYPE_LEVEL_HIGH);
     if ( ret )
         goto err;
 
-    ret = map_one_spi(d, "PCI#INTD", 0xc5, DT_IRQ_TYPE_LEVEL_HIGH);
+    ret = map_one_spi(d, "PCI#INTD", base_spi+3, DT_IRQ_TYPE_LEVEL_HIGH);
     if ( ret )
         goto err;
 
@@ -115,6 +115,69 @@ err:
     return ret;
 }
 
+/*
+ * Xen does not currently support mapping MMIO regions and interrupt
+ * for bus child devices (referenced via the "ranges" and
+ * "interrupt-map" properties to domain 0). Instead for now map the
+ * necessary resources manually.
+ */
+static int xgene_storm_specific_mapping(struct domain *d)
+{
+    struct dt_device_node *node = NULL;
+    int ret;
+
+    while ( (node = dt_find_compatible_node(node, "pci", "apm,xgene-pcie")) )
+    {
+        u64 addr;
+
+        /* Identify the bus via it's control register address */
+        ret = dt_device_get_address(node, 0, &addr, NULL);
+        if ( ret < 0 )
+            return ret;
+
+        if ( !dt_device_is_available(node) )
+            continue;
+
+       switch ( addr )
+        {
+        case 0x1f2b0000: /* PCIe0 */
+            ret = xgene_storm_pcie_specific_mapping(d,
+                node,
+                0x0e000000000UL, 0x10000000000UL, 0xc2);
+            break;
+        case 0x1f2c0000: /* PCIe1 */
+            ret = xgene_storm_pcie_specific_mapping(d,
+                node,
+                0x0d000000000UL, 0x0e000000000UL, 0xc8);
+            break;
+        case 0x1f2d0000: /* PCIe2 */
+            ret = xgene_storm_pcie_specific_mapping(d,
+                node,
+                0x09000000000UL, 0x0a000000000UL, 0xce);
+            break;
+        case 0x1f500000: /* PCIe3 */
+            ret = xgene_storm_pcie_specific_mapping(d,
+                node,
+                0x0a000000000UL, 0x0c000000000UL, 0xd4);
+            break;
+        case 0x1f510000: /* PCIe4 */
+            ret = xgene_storm_pcie_specific_mapping(d,
+                node,
+                0x0c000000000UL, 0x0d000000000UL, 0xda);
+            break;
+
+        default:
+            printk("Ignoring unknown PCI bus %s\n", dt_node_full_name(node));
+            continue;
+        }
+
+        if ( ret < 0 )
+            return ret;
+    }
+
+    return 0;
+}
+
 static void xgene_storm_reset(void)
 {
     void __iomem *addr;
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog