|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] xen/arm: gicv2: Export GICv2m register frames to Dom0 by device tree
commit 86b93e00c0b6b9c72478794b541b0a6bd3d353ef
Author: Wei Chen <wei.chen@xxxxxxxxxx>
AuthorDate: Wed Apr 27 15:05:43 2016 +0800
Commit: Stefano Stabellini <sstabellini@xxxxxxxxxx>
CommitDate: Fri Jun 17 10:22:16 2016 +0100
xen/arm: gicv2: Export GICv2m register frames to Dom0 by device tree
This patch adds v2m extension support in GIC-v2 driver. The GICv2 driver
detects the MSI frames from device tree and creates corresponding device
tree nodes in dom0's DTB. It also provides one hw_ops callback to map
v2m MMIO regions to dom0 and route v2m SPIs to dom0.
With this GICv2m extension support, the dom0 kernel can do GICv2m frame
setup and initialization.
This patch is based on the GICv2m patch of Suravee Suthikulpanit:
[PATCH 2/2] xen/arm: gicv2: Adding support for GICv2m in Dom0
http://lists.xen.org/archives/html/xen-devel/2015-04/msg02613.html
Signed-off-by: Wei Chen <Wei.Chen@xxxxxxxxxx>
Reviewed-by: Julien Grall <julien.grall@xxxxxxx>
---
xen/arch/arm/domain_build.c | 5 +
xen/arch/arm/gic-v2.c | 298 ++++++++++++++++++++++++++++++++++++++++++++
xen/arch/arm/gic.c | 9 ++
xen/include/asm-arm/gic.h | 3 +
4 files changed, 315 insertions(+)
diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 00dc07a..2e4c295 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -2177,6 +2177,11 @@ int construct_dom0(struct domain *d)
if ( rc < 0 )
return rc;
+ /* Map extra GIC MMIO, irqs and other hw stuffs to dom0. */
+ rc = gic_map_hwdom_extra_mappings(d);
+ if ( rc < 0 )
+ return rc;
+
rc = platform_specific_mapping(d);
if ( rc < 0 )
return rc;
diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
index 450755f..afeab57 100644
--- a/xen/arch/arm/gic-v2.c
+++ b/xen/arch/arm/gic-v2.c
@@ -21,6 +21,7 @@
#include <xen/lib.h>
#include <xen/init.h>
#include <xen/mm.h>
+#include <xen/vmap.h>
#include <xen/irq.h>
#include <xen/iocap.h>
#include <xen/sched.h>
@@ -66,6 +67,41 @@
#define GICH_V2_VMCR_PRIORITY_MASK 0x1f
#define GICH_V2_VMCR_PRIORITY_SHIFT 27
+/* GICv2m extension register definitions. */
+/*
+* MSI_TYPER:
+* [31:26] Reserved
+* [25:16] lowest SPI assigned to MSI
+* [15:10] Reserved
+* [9:0] Number of SPIs assigned to MSI
+*/
+#define V2M_MSI_TYPER 0x008
+#define V2M_MSI_TYPER_BASE_SHIFT 16
+#define V2M_MSI_TYPER_BASE_MASK 0x3FF
+#define V2M_MSI_TYPER_NUM_MASK 0x3FF
+#define V2M_MSI_SETSPI_NS 0x040
+#define V2M_MIN_SPI 32
+#define V2M_MAX_SPI 1019
+#define V2M_MSI_IIDR 0xFCC
+
+#define V2M_MSI_TYPER_BASE_SPI(x) \
+ (((x) >> V2M_MSI_TYPER_BASE_SHIFT) & V2M_MSI_TYPER_BASE_MASK)
+
+#define V2M_MSI_TYPER_NUM_SPI(x) ((x) & V2M_MSI_TYPER_NUM_MASK)
+
+struct v2m_data {
+ struct list_head entry;
+ /* Pointer to the DT node representing the v2m frame */
+ const struct dt_device_node *dt_node;
+ paddr_t addr; /* Register frame base */
+ paddr_t size; /* Register frame size */
+ u32 spi_start; /* The SPI number that MSIs start */
+ u32 nr_spis; /* The number of SPIs for MSIs */
+};
+
+/* v2m extension register frame information list */
+static LIST_HEAD(gicv2m_info);
+
/* Global state */
static struct {
void __iomem * map_dbase; /* IO mapped Address of distributor registers */
@@ -551,6 +587,167 @@ static void gicv2_irq_set_affinity(struct irq_desc *desc,
const cpumask_t *cpu_m
spin_unlock(&gicv2.lock);
}
+static int gicv2_map_hwdown_extra_mappings(struct domain *d)
+{
+ const struct v2m_data *v2m_data;
+
+ /* For the moment, we'll assign all v2m frames to the hardware domain. */
+ list_for_each_entry( v2m_data, &gicv2m_info, entry )
+ {
+ int ret;
+ u32 spi;
+
+ printk("GICv2: Mapping v2m frame to d%d: addr=0x%lx size=0x%lx
spi_base=%u num_spis=%u\n",
+ d->domain_id, v2m_data->addr, v2m_data->size,
+ v2m_data->spi_start, v2m_data->nr_spis);
+
+ ret = map_mmio_regions(d, paddr_to_pfn(v2m_data->addr),
+ DIV_ROUND_UP(v2m_data->size, PAGE_SIZE),
+ paddr_to_pfn(v2m_data->addr));
+ if ( ret )
+ {
+ printk(XENLOG_ERR "GICv2: Map v2m frame to d%d failed.\n",
+ d->domain_id);
+ return ret;
+ }
+
+ /*
+ * Map all SPIs that are allocated to MSIs for the frame to the
+ * domain.
+ */
+ for ( spi = v2m_data->spi_start;
+ spi < (v2m_data->spi_start + v2m_data->nr_spis); spi++ )
+ {
+ /*
+ * MSIs are always edge-triggered. Configure the associated SPIs
+ * to be edge-rising as default type.
+ */
+ ret = irq_set_spi_type(spi, IRQ_TYPE_EDGE_RISING);
+ if ( ret )
+ {
+ printk(XENLOG_ERR
+ "GICv2: Failed to set v2m MSI SPI[%d] type.\n", spi);
+ return ret;
+ }
+
+ /* Route a SPI that is allocated to MSI to the domain. */
+ ret = route_irq_to_guest(d, spi, spi, "v2m");
+ if ( ret )
+ {
+ printk(XENLOG_ERR
+ "GICv2: Failed to route v2m MSI SPI[%d] to Dom%d.\n",
+ spi, d->domain_id);
+ return ret;
+ }
+
+ /* Reserve a SPI that is allocated to MSI for the domain. */
+ if ( !vgic_reserve_virq(d, spi) )
+ {
+ printk(XENLOG_ERR
+ "GICv2: Failed to reserve v2m MSI SPI[%d] for Dom%d.\n",
+ spi, d->domain_id);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Set up gic v2m DT sub-node.
+ * Please refer to the binding document:
+ *
https://www.kernel.org/doc/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+ */
+static int gicv2m_make_dt_node(const struct domain *d,
+ const struct dt_device_node *gic,
+ void *fdt)
+{
+ u32 len;
+ int res;
+ const void *prop = NULL;
+ const struct dt_device_node *v2m = NULL;
+ const struct v2m_data *v2m_data;
+
+ /* The sub-nodes require the ranges property */
+ prop = dt_get_property(gic, "ranges", &len);
+ if ( !prop )
+ {
+ printk(XENLOG_ERR "Can't find ranges property for the gic node\n");
+ return -FDT_ERR_XEN(ENOENT);
+ }
+
+ res = fdt_property(fdt, "ranges", prop, len);
+ if ( res )
+ return res;
+
+ list_for_each_entry( v2m_data, &gicv2m_info, entry )
+ {
+ v2m = v2m_data->dt_node;
+
+ printk("GICv2: Creating v2m DT node for d%d: addr=0x%lx size=0x%lx
spi_base=%u num_spis=%u\n",
+ d->domain_id, v2m_data->addr, v2m_data->size,
+ v2m_data->spi_start, v2m_data->nr_spis);
+
+ res = fdt_begin_node(fdt, v2m->name);
+ if ( res )
+ return res;
+
+ res = fdt_property_string(fdt, "compatible", "arm,gic-v2m-frame");
+ if ( res )
+ return res;
+
+ res = fdt_property(fdt, "msi-controller", NULL, 0);
+ if ( res )
+ return res;
+
+ if ( v2m->phandle )
+ {
+ res = fdt_property_cell(fdt, "phandle", v2m->phandle);
+ if ( res )
+ return res;
+ }
+
+ /* Use the same reg regions as v2m node in host DTB. */
+ prop = dt_get_property(v2m, "reg", &len);
+ if ( !prop )
+ {
+ printk(XENLOG_ERR "GICv2: Can't find v2m reg property.\n");
+ res = -FDT_ERR_XEN(ENOENT);
+ return res;
+ }
+
+ res = fdt_property(fdt, "reg", prop, len);
+ if ( res )
+ return res;
+
+ /*
+ * The properties msi-base-spi and msi-num-spis are used to override
+ * the hardware settings. Therefore it is fine to always write them
+ * in the guest DT.
+ */
+ res = fdt_property_u32(fdt, "arm,msi-base-spi", v2m_data->spi_start);
+ if ( res )
+ {
+ printk(XENLOG_ERR
+ "GICv2: Failed to create v2m msi-base-spi in Guest DT.\n");
+ return res;
+ }
+
+ res = fdt_property_u32(fdt, "arm,msi-num-spis", v2m_data->nr_spis);
+ if ( res )
+ {
+ printk(XENLOG_ERR
+ "GICv2: Failed to create v2m msi-num-spis in Guest DT.\n");
+ return res;
+ }
+
+ fdt_end_node(fdt);
+ }
+
+ return res;
+}
+
static int gicv2_make_hwdom_dt_node(const struct domain *d,
const struct dt_device_node *gic,
void *fdt)
@@ -587,6 +784,10 @@ static int gicv2_make_hwdom_dt_node(const struct domain *d,
len *= 2;
res = fdt_property(fdt, "reg", regs, len);
+ if ( res )
+ return res;
+
+ res = gicv2m_make_dt_node(d, gic, fdt);
return res;
}
@@ -632,6 +833,96 @@ static bool_t gicv2_is_aliased(paddr_t cbase, paddr_t
csize)
return ((val_low & 0xfff0fff) == 0x0202043B && val_low == val_high);
}
+static void gicv2_add_v2m_frame_to_list(paddr_t addr, paddr_t size,
+ u32 spi_start, u32 nr_spis,
+ const struct dt_device_node *v2m)
+{
+ struct v2m_data *v2m_data;
+
+ /*
+ * If the hardware setting hasn't been overridden by DT or ACPI, we have
+ * to read base_spi and num_spis from hardware registers to reserve irqs.
+ */
+ if ( !spi_start || !nr_spis )
+ {
+ u32 msi_typer;
+ void __iomem *base;
+
+ base = ioremap_nocache(addr, size);
+ if ( !base )
+ panic("GICv2: Cannot remap v2m register frame");
+
+ msi_typer = readl_relaxed(base + V2M_MSI_TYPER);
+ spi_start = V2M_MSI_TYPER_BASE_SPI(msi_typer);
+ nr_spis = V2M_MSI_TYPER_NUM_SPI(msi_typer);
+
+ iounmap(base);
+ }
+
+ if ( spi_start < V2M_MIN_SPI )
+ panic("GICv2: Invalid v2m base SPI:%u\n", spi_start);
+
+ if ( ( nr_spis == 0 ) || ( spi_start + nr_spis > V2M_MAX_SPI ) )
+ panic("GICv2: Number of v2m SPIs (%u) exceed maximum (%u)\n",
+ nr_spis, V2M_MAX_SPI - V2M_MIN_SPI + 1);
+
+ /* Allocate an entry to record new v2m frame information. */
+ v2m_data = xzalloc_bytes(sizeof(struct v2m_data));
+ if ( !v2m_data )
+ panic("GICv2: Cannot allocate memory for v2m frame");
+
+ INIT_LIST_HEAD(&v2m_data->entry);
+ v2m_data->addr = addr;
+ v2m_data->size = size;
+ v2m_data->spi_start = spi_start;
+ v2m_data->nr_spis = nr_spis;
+ v2m_data->dt_node = v2m;
+
+ printk("GICv2m extension register frame:\n"
+ " gic_v2m_addr=%"PRIpaddr"\n"
+ " gic_v2m_size=%"PRIpaddr"\n"
+ " gic_v2m_spi_base=%u\n"
+ " gic_v2m_num_spis=%u\n",
+ v2m_data->addr, v2m_data->size,
+ v2m_data->spi_start, v2m_data->nr_spis);
+
+ list_add_tail(&v2m_data->entry, &gicv2m_info);
+}
+
+static void gicv2_extension_dt_init(const struct dt_device_node *node)
+{
+ const struct dt_device_node *v2m = NULL;
+
+ /*
+ * Check whether this GIC implements the v2m extension. If so,
+ * add v2m register frames to gicv2m_info.
+ */
+ dt_for_each_child_node(node, v2m)
+ {
+ u32 spi_start = 0, nr_spis = 0;
+ paddr_t addr, size;
+
+ if ( !dt_device_is_compatible(v2m, "arm,gic-v2m-frame") )
+ continue;
+
+ /* Get register frame resource from DT. */
+ if ( dt_device_get_address(v2m, 0, &addr, &size) )
+ panic("GICv2: Cannot find a valid v2m frame address");
+
+ /*
+ * Check whether DT uses msi-base-spi and msi-num-spis properties to
+ * override the hardware setting.
+ */
+ if ( dt_property_read_u32(v2m, "arm,msi-base-spi", &spi_start) &&
+ dt_property_read_u32(v2m, "arm,msi-num-spis", &nr_spis) )
+ printk("GICv2: DT overriding v2m hardware setting (base:%u,
num:%u)\n",
+ spi_start, nr_spis);
+
+ /* Add this v2m frame information to list. */
+ gicv2_add_v2m_frame_to_list(addr, size, spi_start, nr_spis, v2m);
+ }
+}
+
static paddr_t __initdata hbase, dbase, cbase, csize, vbase;
static void __init gicv2_dt_init(void)
@@ -683,6 +974,12 @@ static void __init gicv2_dt_init(void)
if ( csize != vsize )
panic("GICv2: Sizes of GICC (%#"PRIpaddr") and GICV (%#"PRIpaddr")
don't match\n",
csize, vsize);
+
+ /*
+ * Check whether this GIC implements the v2m extension. If so,
+ * add v2m register frames to gicv2_extension_info.
+ */
+ gicv2_extension_dt_init(node);
}
static int gicv2_iomem_deny_access(const struct domain *d)
@@ -936,6 +1233,7 @@ const static struct gic_hw_operations gicv2_ops = {
.read_apr = gicv2_read_apr,
.make_hwdom_dt_node = gicv2_make_hwdom_dt_node,
.make_hwdom_madt = gicv2_make_hwdom_madt,
+ .map_hwdom_extra_mappings = gicv2_map_hwdown_extra_mappings,
.iomem_deny_access = gicv2_iomem_deny_access,
};
diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 2bfe4de..12bb0ab 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -230,6 +230,15 @@ int gic_irq_xlate(const u32 *intspec, unsigned int intsize,
return 0;
}
+/* Map extra GIC MMIO, irqs and other hw stuffs to the hardware domain. */
+int gic_map_hwdom_extra_mappings(struct domain *d)
+{
+ if ( gic_hw_ops->map_hwdom_extra_mappings )
+ return gic_hw_ops->map_hwdom_extra_mappings(d);
+
+ return 0;
+}
+
static void __init gic_dt_preinit(void)
{
int rc;
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index cd97bb2..836f1ad 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -360,6 +360,8 @@ struct gic_hw_operations {
const struct dt_device_node *gic, void *fdt);
/* Create MADT table for the hardware domain */
int (*make_hwdom_madt)(const struct domain *d, u32 offset);
+ /* Map extra GIC MMIO, irqs and other hw stuffs to the hardware domain. */
+ int (*map_hwdom_extra_mappings)(struct domain *d);
/* Deny access to GIC regions */
int (*iomem_deny_access)(const struct domain *d);
};
@@ -369,6 +371,7 @@ int gic_make_hwdom_dt_node(const struct domain *d,
const struct dt_device_node *gic,
void *fdt);
int gic_make_hwdom_madt(const struct domain *d, u32 offset);
+int gic_map_hwdom_extra_mappings(struct domain *d);
int gic_iomem_deny_access(const struct domain *d);
#endif /* __ASSEMBLY__ */
--
generated by git-patchbot for /home/xen/git/xen.git#master
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |