[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] xsm: add a default policy to .init.data
commit 08cffe6696c047123bd552e095163924c8ef4353 Author: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx> AuthorDate: Mon Jun 20 10:04:26 2016 -0400 Commit: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> CommitDate: Fri Jun 24 15:53:22 2016 +0100 xsm: add a default policy to .init.data This adds a Kconfig option and support for including the XSM policy from tools/flask/policy in the hypervisor so that the bootloader does not need to provide a policy to get sane behavior from an XSM-enabled hypervisor. The policy provided by the bootloader, if present, will override the built-in policy. Enabling this option only builds the policy if checkpolicy is available during compilation of the hypervisor; otherwise, it does nothing. The XSM policy is not moved out of tools because that remains the primary location for installing and configuring the policy. Signed-off-by: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> Reviewed-by: Doug Goldstein <cardoe@xxxxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Julien Grall <julien.grall@xxxxxxx> --- docs/misc/xen-command-line.markdown | 16 +++++++++------- docs/misc/xsm-flask.txt | 30 +++++++++++++++--------------- xen/arch/arm/xen.lds.S | 4 ++++ xen/arch/x86/xen.lds.S | 5 +++++ xen/common/Kconfig | 17 +++++++++++++++++ xen/xsm/flask/Makefile | 17 +++++++++++++++++ xen/xsm/xsm_core.c | 15 ++++++++++++++- 7 files changed, 81 insertions(+), 23 deletions(-) diff --git a/docs/misc/xen-command-line.markdown b/docs/misc/xen-command-line.markdown index 045478f..db96997 100644 --- a/docs/misc/xen-command-line.markdown +++ b/docs/misc/xen-command-line.markdown @@ -712,13 +712,15 @@ enabled by running either: with untrusted guests. If a policy is provided by the bootloader, it will be loaded; errors will be reported to the ring buffer but will not prevent booting. The policy can be changed to enforcing mode using "xl setenforce". -* `enforcing`: This requires a security policy to be provided by the bootloader - and will enter enforcing mode prior to the creation of domain 0. If a valid - policy is not provided, the hypervisor will not continue booting. -* `late`: This disables loading of the security policy from the bootloader. - FLASK will be enabled but will not enforce access controls until a policy is - loaded by a domain using "xl loadpolicy". Once a policy is loaded, FLASK will - run in enforcing mode unless "xl setenforce" has changed that setting. +* `enforcing`: This will cause the security server to enter enforcing mode prior + to the creation of domain 0. If an valid policy is not provided by the + bootloader and no built-in policy is present, the hypervisor will not continue + booting. +* `late`: This disables loading of the built-in security policy or the policy + provided by the bootloader. FLASK will be enabled but will not enforce access + controls until a policy is loaded by a domain using "xl loadpolicy". Once a + policy is loaded, FLASK will run in enforcing mode unless "xl setenforce" has + changed that setting. * `disabled`: This causes the XSM framework to revert to the dummy module. The dummy module provides the same security policy as is used when compiling the hypervisor without support for XSM. The xsm\_op hypercall can also be used to diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt index 2f42585..62f15dd 100644 --- a/docs/misc/xsm-flask.txt +++ b/docs/misc/xsm-flask.txt @@ -141,21 +141,21 @@ only type enforcement is used and the user and role are set to system_u and system_r for all domains. The FLASK security framework is mostly configured using a security policy file. -This policy file is not normally generated during the Xen build process because -it relies on the SELinux compiler "checkpolicy"; run - - make -C tools/flask/policy - -to compile the example policy included with Xen. The policy is generated from -definition files under this directory. Most changes to security policy will -involve creating or modifying modules found in tools/flask/policy/modules/. The -modules.conf file there defines what modules are enabled and has short -descriptions of each module. - -The XSM policy file needs to be copied to /boot and loaded as a module by grub. -The exact position of the module does not matter as long as it is after the Xen -kernel; it is normally placed either just above the dom0 kernel or at the end. -Once dom0 is running, the policy can be reloaded using "xl loadpolicy". +It relies on the SELinux compiler "checkpolicy"; if this is available, the +policy will be compiled as part of the tools build. If hypervisor support for a +built-in policy is enabled ("Compile Xen with a built-in security policy"), the +policy will be built during the hypervisor build. + +The policy is generated from definition files in tools/flask/policy. Most +changes to security policy will involve creating or modifying modules found in +tools/flask/policy/modules/. The modules.conf file there defines what modules +are enabled and has short descriptions of each module. + +If not using the built-in policy, the XSM policy file needs to be copied to +/boot and loaded as a module by grub. The exact position and filename of the +module does not matter as long as it is after the Xen kernel; it is normally +placed either just above the dom0 kernel or at the end. Once dom0 is running, +the policy can be reloaded using "xl loadpolicy". The example policy included with Xen demonstrates most of the features of FLASK that can be used without dom0 disaggregation. The main types for domUs are: diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S index b18c9c2..8736bc6 100644 --- a/xen/arch/arm/xen.lds.S +++ b/xen/arch/arm/xen.lds.S @@ -155,6 +155,10 @@ SECTIONS *(.init.data.rel) *(.init.data.rel.*) + __xsm_init_policy_start = .; + *(.init.xsm_policy) + __xsm_init_policy_end = .; + . = ALIGN(8); __ctors_start = .; *(.init_array) diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S index d620e7a..6904979 100644 --- a/xen/arch/x86/xen.lds.S +++ b/xen/arch/x86/xen.lds.S @@ -167,6 +167,11 @@ SECTIONS *(.init.data) *(.init.data.rel) *(.init.data.rel.*) + + __xsm_init_policy_start = .; + *(.init.xsm_policy) + __xsm_init_policy_end = .; + . = ALIGN(4); __trampoline_rel_start = .; *(.trampoline_rel) diff --git a/xen/common/Kconfig b/xen/common/Kconfig index daab832..bcaf953 100644 --- a/xen/common/Kconfig +++ b/xen/common/Kconfig @@ -143,6 +143,23 @@ config FLASK_AVC_STATS If unsure, say Y. +config XSM_POLICY + bool "Compile Xen with a built-in security policy" + default y + depends on XSM + ---help--- + This includes a default XSM policy in the hypervisor so that the + bootloader does not need to load a policy to get sane behavior from an + XSM-enabled hypervisor. If this is disabled, a policy must be + provided by the bootloader or by Domain 0. Even if this is enabled, a + policy provided by the bootloader will override it. + + This requires that the SELinux policy compiler (checkpolicy) be + available when compiling the hypervisor; if this tool is not found, no + policy will be added. + + If unsure, say Y. + # Enable schedulers menu "Schedulers" visible if EXPERT = "y" diff --git a/xen/xsm/flask/Makefile b/xen/xsm/flask/Makefile index 12fc3a9..eefd37c 100644 --- a/xen/xsm/flask/Makefile +++ b/xen/xsm/flask/Makefile @@ -27,6 +27,23 @@ $(FLASK_H_FILES): $(FLASK_H_DEPEND) $(AV_H_FILES): $(AV_H_DEPEND) $(CONFIG_SHELL) policy/mkaccess_vector.sh $(AWK) $(AV_H_DEPEND) +ifeq ($(CONFIG_XSM_POLICY),y) +HAS_CHECKPOLICY := $(shell checkpolicy -h 2>&1 | grep -q xen && echo y || echo n) + +obj-$(HAS_CHECKPOLICY) += policy.o +endif + +LDFLAGS += --accept-unknown-input-arch + +POLICY_SRC := $(XEN_ROOT)/tools/flask/policy/xenpolicy-$(XEN_FULLVERSION) + +policy.bin: FORCE + $(MAKE) -C $(XEN_ROOT)/tools/flask/policy + cmp -s $(POLICY_SRC) $@ || cp $(POLICY_SRC) $@ + +policy.o: policy.bin + $(OBJCOPY) -S -I binary -O elf64-little --rename-section=.data=.init.xsm_policy $< $@ + .PHONY: clean clean:: rm -f $(ALL_H_FILES) *.o $(DEPS) diff --git a/xen/xsm/xsm_core.c b/xen/xsm/xsm_core.c index 8df1a3c..509210c 100644 --- a/xen/xsm/xsm_core.c +++ b/xen/xsm/xsm_core.c @@ -36,6 +36,17 @@ static inline int verify(struct xsm_operations *ops) return 0; } +extern char __xsm_init_policy_start[], __xsm_init_policy_end[]; + +static void __init xsm_policy_init(void) +{ + if ( policy_size == 0 && __xsm_init_policy_end != __xsm_init_policy_start ) + { + policy_buffer = __xsm_init_policy_start; + policy_size = __xsm_init_policy_end - __xsm_init_policy_start; + } +} + static int __init xsm_core_init(void) { if ( verify(&dummy_xsm_ops) ) @@ -46,6 +57,7 @@ static int __init xsm_core_init(void) } xsm_ops = &dummy_xsm_ops; + xsm_policy_init(); flask_init(); return 0; @@ -98,7 +110,8 @@ int __init xsm_dt_init(void) ret = xsm_core_init(); - xfree(policy_buffer); + if ( policy_buffer != __xsm_init_policy_start ) + xfree(policy_buffer); return ret; } -- generated by git-patchbot for /home/xen/git/xen.git#master _______________________________________________ Xen-changelog mailing list Xen-changelog@xxxxxxxxxxxxx http://lists.xensource.com/xen-changelog
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |