[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen staging] fuzz, test x86_emulator: disable sse before including always_inline fns



commit e8dfbc2962365ffa3d7ddcacaa5baaf4ed24b2af
Author:     Christopher Clark <christopher.clark6@xxxxxxxxxxxxxx>
AuthorDate: Tue Sep 25 16:30:32 2018 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Sep 25 16:30:32 2018 +0200

    fuzz, test x86_emulator: disable sse before including always_inline fns
    
    Workaround for compiler rejection of SSE-using always_inlines defined before
    SSE is disabled.
    
    Compiling with _FORTIFY_SOURCE or higher levels of optimization enabled
    will always_inline several library fns (memset, memcpy, ...)
    (with gcc 8.2.0 and glibc 2.28).
    
    In fuzz and x86_emulator test, the compiler is instructed not
    to generate SSE instructions via: #pragma GCC target("no-sse")
    because those registers are needed for use by the workload.
    
    The combination above causes compilation failure as the inline functions
    use those instructions. This is resolved by reordering the inclusion of
    <stdio.h> and <string.h> to after the pragma disabling SSE generation.
    
    It would be preferable to locate the no-sse pragma within x86-emulate.h at 
the
    top of the file, prior to including any other headers; unfortunately doing 
so
    before <stdlib.h> causes compilation failure due to declaration of 'atof' 
with:
      "SSE register return with SSE disabled".
    Fortunately there is no (known) current dependency on any always_inline
    SSE-inclined function declared in <stdlib.h> or any of its dependencies, so 
the
    pragma is therefore issued immediately after inclusion of <stdlib.h> with a
    comment introduced to explain its location there.
    
    Add compile-time checks for unwanted prior inclusion of <string.h> and
    <stdio.h>, which are the two headers that provide the library functions that
    are handled with wrappers and listed within "x86-emulate.h" as ones "we 
think
    might access any of the FPU state".
    * Use standard-defined "EOF" macro to detect prior <stdio.h> inclusion.
    * Use "_STRING_H" (non-standardized guard macro) as best-effort
      for detection of prior <string.h> inclusion. This is non-universally
      viable but will provide error output on common GLIBC systems, so
      provides some defensive coverage.
    
    Adds conditional #include <stdio.h> to x86-emulate.h because fwrite, printf,
    etc. are referenced when WRAP has been defined.
    
    Signed-off-by: Christopher Clark <christopher.clark6@xxxxxxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 tools/fuzz/x86_instruction_emulator/fuzz-emul.c | 10 +++++++--
 tools/tests/x86_emulator/wrappers.c             |  1 -
 tools/tests/x86_emulator/x86-emulate.h          | 28 +++++++++++++++++++++++--
 3 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/tools/fuzz/x86_instruction_emulator/fuzz-emul.c 
b/tools/fuzz/x86_instruction_emulator/fuzz-emul.c
index 03a2473cdb..0ffd0fbfe1 100644
--- a/tools/fuzz/x86_instruction_emulator/fuzz-emul.c
+++ b/tools/fuzz/x86_instruction_emulator/fuzz-emul.c
@@ -6,9 +6,7 @@
 #include <stdbool.h>
 #include <stddef.h>
 #include <stdint.h>
-#include <stdio.h>
 #include <stdlib.h>
-#include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/mman.h>
@@ -16,6 +14,14 @@
 #include <xen/xen.h>
 
 #include "x86-emulate.h"
+/*
+ * include "x86-emulate.h" prior to <stdio.h> and <string.h>:
+ * x86-emulate.h disables use of SSE registers, while <stdio.h> and <string.h>
+ * declare functions that may be always_inline and use those registers
+ * unless they have been disabled earlier, which can fail to compile.
+ */
+#include <stdio.h>
+#include <string.h>
 #include "fuzz-emul.h"
 
 #define MSR_INDEX_MAX 16
diff --git a/tools/tests/x86_emulator/wrappers.c 
b/tools/tests/x86_emulator/wrappers.c
index d02013c4b1..eba7cc93c5 100644
--- a/tools/tests/x86_emulator/wrappers.c
+++ b/tools/tests/x86_emulator/wrappers.c
@@ -1,5 +1,4 @@
 #include <stdarg.h>
-#include <stdio.h>
 
 #define WRAP(x) typeof(x) emul_##x
 #include "x86-emulate.h"
diff --git a/tools/tests/x86_emulator/x86-emulate.h 
b/tools/tests/x86_emulator/x86-emulate.h
index b249e4673c..08dead32fd 100644
--- a/tools/tests/x86_emulator/x86-emulate.h
+++ b/tools/tests/x86_emulator/x86-emulate.h
@@ -3,10 +3,34 @@
 #include <stddef.h>
 #include <stdint.h>
 #include <stdlib.h>
+/*
+ * Use of sse registers must be disabled prior to the definition of
+ * always_inline functions that would use them (memcpy, memset, etc),
+ * so do this as early as possible, aiming to be before any always_inline
+ * functions that are used are declared.
+ * Unfortunately, this cannot be done prior to inclusion of <stdlib.h>
+ * due to functions such as 'atof' that have SSE register return declared,
+ * so do so here, immediately after that.
+ */
+#if __GNUC__ >= 6
+# pragma GCC target("no-sse")
+#endif
+ /*
+ * Attempt detection of unwanted prior inclusion of some headers known to use
+ * always_inline with SSE registers in some library / compiler / optimization
+ * combinations.
+ */
+#ifdef _STRING_H
+# error "Must not include <string.h> before x86-emulate.h"
+#endif
 #include <string.h>
 
-#if __GNUC__ >= 6
-#pragma GCC target("no-sse")
+/* EOF is a standard macro defined in <stdio.h> so use it for detection */
+#ifdef EOF
+# error "Must not include <stdio.h> before x86-emulate.h"
+#endif
+#ifdef WRAP
+# include <stdio.h>
 #endif
 
 #include <xen/xen.h>
--
generated by git-patchbot for /home/xen/git/xen.git#staging

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.