[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen staging-4.10] x86/boot: Initialise the debug registers correctly



commit b0f1b24663b8c09bed7c3171385caad89d937428
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Mon Nov 5 15:11:10 2018 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Mon Nov 5 15:11:10 2018 +0100

    x86/boot: Initialise the debug registers correctly
    
    In particular, initialising %dr6 with the value 0 is buggy, because on
    hardware supporting Transactional Memory, it will cause the sticky RTM bit 
to
    be asserted, even though a debug exception from a transaction hasn't 
actually
    been observed.
    
    Move X86_DR6_DEFAULT into x86-defns.h along with the other architectural
    register constants, and introduce a new X86_DR7_DEFAULT.  Use the existing
    write_debugreg() helper, rather than opencoded inline assembly.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    master commit: 721da6d41a70fe08b3fcd9c31a62f6709a54c6ba
    master date: 2018-10-24 14:43:05 +0100
---
 xen/arch/x86/cpu/common.c       | 12 ++++++++----
 xen/include/asm-x86/debugreg.h  |  2 --
 xen/include/asm-x86/x86-defns.h | 10 ++++++++++
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/xen/arch/x86/cpu/common.c b/xen/arch/x86/cpu/common.c
index 84249be993..e7349be6fe 100644
--- a/xen/arch/x86/cpu/common.c
+++ b/xen/arch/x86/cpu/common.c
@@ -3,6 +3,7 @@
 #include <xen/delay.h>
 #include <xen/smp.h>
 #include <asm/current.h>
+#include <asm/debugreg.h>
 #include <asm/processor.h>
 #include <asm/xstate.h>
 #include <asm/msr.h>
@@ -817,10 +818,13 @@ void cpu_init(void)
        /* Ensure FPU gets initialised for each domain. */
        stts();
 
-       /* Clear all 6 debug registers: */
-#define CD(register) asm volatile ( "mov %0,%%db" #register : : "r"(0UL) );
-       CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
-#undef CD
+       /* Reset debug registers: */
+       write_debugreg(0, 0);
+       write_debugreg(1, 0);
+       write_debugreg(2, 0);
+       write_debugreg(3, 0);
+       write_debugreg(6, X86_DR6_DEFAULT);
+       write_debugreg(7, X86_DR7_DEFAULT);
 
        /* Enable NMIs.  Our loader (e.g. Tboot) may have left them disabled. */
        enable_nmis();
diff --git a/xen/include/asm-x86/debugreg.h b/xen/include/asm-x86/debugreg.h
index b3b10eaf40..c57914efc6 100644
--- a/xen/include/asm-x86/debugreg.h
+++ b/xen/include/asm-x86/debugreg.h
@@ -24,8 +24,6 @@
 #define DR_STATUS_RESERVED_ZERO (~0xffffeffful) /* Reserved, read as zero */
 #define DR_STATUS_RESERVED_ONE  0xffff0ff0ul /* Reserved, read as one */
 
-#define X86_DR6_DEFAULT 0xffff0ff0ul    /* Default %dr6 value. */
-
 /* Now define a bunch of things for manipulating the control register.
    The top two bytes of the control register consist of 4 fields of 4
    bits - each field corresponds to one of the four debug registers,
diff --git a/xen/include/asm-x86/x86-defns.h b/xen/include/asm-x86/x86-defns.h
index 10b366a07d..b700c4ea2b 100644
--- a/xen/include/asm-x86/x86-defns.h
+++ b/xen/include/asm-x86/x86-defns.h
@@ -73,4 +73,14 @@
 #define X86_CR4_SMAP       0x00200000 /* enable SMAP */
 #define X86_CR4_PKE        0x00400000 /* enable PKE */
 
+/*
+ * Debug status flags in DR6.
+ */
+#define X86_DR6_DEFAULT         0xffff0ff0  /* Default %dr6 value. */
+
+/*
+ * Debug control flags in DR7.
+ */
+#define X86_DR7_DEFAULT         0x00000400  /* Default %dr7 value. */
+
 #endif /* __XEN_X86_DEFNS_H__ */
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.10

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.