|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging] x86emul: use AVX512 logic for emulating V{, P}MASKMOV*
commit 1a7afebf041f01e6a73ac9ed91ca40c5c8406711
Author: Jan Beulich <jbeulich@xxxxxxxx>
AuthorDate: Tue Nov 20 15:07:35 2018 +0100
Commit: Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Nov 20 15:07:35 2018 +0100
x86emul: use AVX512 logic for emulating V{,P}MASKMOV*
The more generic AVX512 implementation allows quite a bit of insn-
specific code to be dropped/shared.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
xen/arch/x86/x86_emulate/x86_emulate.c | 87 +++++-----------------------------
1 file changed, 12 insertions(+), 75 deletions(-)
diff --git a/xen/arch/x86/x86_emulate/x86_emulate.c
b/xen/arch/x86/x86_emulate/x86_emulate.c
index de6d79b692..92ca59a11f 100644
--- a/xen/arch/x86/x86_emulate/x86_emulate.c
+++ b/xen/arch/x86/x86_emulate/x86_emulate.c
@@ -439,8 +439,8 @@ static const struct ext0f38_table {
[0x28 ... 0x29] = { .simd_size = simd_packed_int },
[0x2a] = { .simd_size = simd_packed_int, .two_op = 1, .d8s = d8s_vl },
[0x2b] = { .simd_size = simd_packed_int },
- [0x2c ... 0x2d] = { .simd_size = simd_other },
- [0x2e ... 0x2f] = { .simd_size = simd_other, .to_mem = 1 },
+ [0x2c ... 0x2d] = { .simd_size = simd_packed_fp },
+ [0x2e ... 0x2f] = { .simd_size = simd_packed_fp, .to_mem = 1 },
[0x30 ... 0x35] = { .simd_size = simd_other, .two_op = 1 },
[0x36 ... 0x3f] = { .simd_size = simd_packed_int },
[0x40] = { .simd_size = simd_packed_int },
@@ -449,8 +449,8 @@ static const struct ext0f38_table {
[0x58 ... 0x59] = { .simd_size = simd_other, .two_op = 1 },
[0x5a] = { .simd_size = simd_128, .two_op = 1 },
[0x78 ... 0x79] = { .simd_size = simd_other, .two_op = 1 },
- [0x8c] = { .simd_size = simd_other },
- [0x8e] = { .simd_size = simd_other, .to_mem = 1 },
+ [0x8c] = { .simd_size = simd_packed_int },
+ [0x8e] = { .simd_size = simd_packed_int, .to_mem = 1 },
[0x90 ... 0x93] = { .simd_size = simd_other, .vsib = 1 },
[0x96 ... 0x98] = { .simd_size = simd_packed_fp },
[0x99] = { .simd_size = simd_scalar_vexw },
@@ -7998,6 +7998,8 @@ x86_emulate(
generate_exception_if(ea.type != OP_MEM || vex.w, EXC_UD);
host_and_vcpu_must_have(avx);
+ elem_bytes = 4 << (b & 1);
+ vmaskmov:
get_fpu(X86EMUL_FPU_ymm);
/*
@@ -8012,7 +8014,7 @@ x86_emulate(
opc = init_prefixes(stub);
pvex = copy_VEX(opc, vex);
pvex->opcx = vex_0f;
- if ( !(b & 1) )
+ if ( elem_bytes == 4 )
pvex->pfx = vex_none;
opc[0] = 0x50; /* vmovmskp{s,d} */
/* Use %rax as GPR destination and VEX.vvvv as source. */
@@ -8025,21 +8027,9 @@ x86_emulate(
invoke_stub("", "", "=a" (ea.val) : [dummy] "i" (0));
put_stub(stub);
- if ( !ea.val )
- goto complete_insn;
-
- op_bytes = 4 << (b & 1);
- first_byte = __builtin_ctz(ea.val);
- ea.val >>= first_byte;
- first_byte *= op_bytes;
- op_bytes *= 32 - __builtin_clz(ea.val);
-
- /*
- * Even for the memory write variant a memory read is needed, unless
- * all set mask bits are contiguous.
- */
- if ( ea.val & (ea.val + 1) )
- d = (d & ~SrcMask) | SrcMem;
+ evex.opmsk = 1; /* fake */
+ op_mask = ea.val;
+ fault_suppression = true;
opc = init_prefixes(stub);
opc[0] = b;
@@ -8090,63 +8080,10 @@ x86_emulate(
case X86EMUL_OPC_VEX_66(0x0f38, 0x8c): /* vpmaskmov{d,q}
mem,{x,y}mm,{x,y}mm */
case X86EMUL_OPC_VEX_66(0x0f38, 0x8e): /* vpmaskmov{d,q}
{x,y}mm,{x,y}mm,mem */
- {
- typeof(vex) *pvex;
- unsigned int mask = vex.w ? 0x80808080U : 0x88888888U;
-
generate_exception_if(ea.type != OP_MEM, EXC_UD);
host_and_vcpu_must_have(avx2);
- get_fpu(X86EMUL_FPU_ymm);
-
- /*
- * While we can't reasonably provide fully correct behavior here
- * (in particular, for writes, avoiding the memory read in anticipation
- * of all elements in the range eventually being written), we can (and
- * should) still limit the memory access to the smallest possible range
- * (suppressing it altogether if all mask bits are clear), to provide
- * correct faulting behavior. Read the mask bits via vmovmskp{s,d}
- * for that purpose.
- */
- opc = init_prefixes(stub);
- pvex = copy_VEX(opc, vex);
- pvex->opcx = vex_0f;
- opc[0] = 0xd7; /* vpmovmskb */
- /* Use %rax as GPR destination and VEX.vvvv as source. */
- pvex->r = 1;
- pvex->b = !mode_64bit() || (vex.reg >> 3);
- opc[1] = 0xc0 | (~vex.reg & 7);
- pvex->reg = 0xf;
- opc[2] = 0xc3;
-
- invoke_stub("", "", "=a" (ea.val) : [dummy] "i" (0));
- put_stub(stub);
-
- /* Convert byte granular result to dword/qword granularity. */
- ea.val &= mask;
- if ( !ea.val )
- goto complete_insn;
-
- first_byte = __builtin_ctz(ea.val) & ~((4 << vex.w) - 1);
- ea.val >>= first_byte;
- op_bytes = 32 - __builtin_clz(ea.val);
-
- /*
- * Even for the memory write variant a memory read is needed, unless
- * all set mask bits are contiguous.
- */
- if ( ea.val & (ea.val + ~mask + 1) )
- d = (d & ~SrcMask) | SrcMem;
-
- opc = init_prefixes(stub);
- opc[0] = b;
- /* Convert memory operand to (%rAX). */
- rex_prefix &= ~REX_B;
- vex.b = 1;
- opc[1] = modrm & 0x38;
- insn_bytes = PFX_BYTES + 2;
-
- break;
- }
+ elem_bytes = 4 << vex.w;
+ goto vmaskmov;
case X86EMUL_OPC_VEX_66(0x0f38, 0x90): /* vpgatherd{d,q}
{x,y}mm,mem,{x,y}mm */
case X86EMUL_OPC_VEX_66(0x0f38, 0x91): /* vpgatherq{d,q}
{x,y}mm,mem,{x,y}mm */
--
generated by git-patchbot for /home/xen/git/xen.git#staging
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |