|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging-4.10] x86/pv: Don't have %cr4.fsgsbase active behind a guest kernels back
commit 9f663d2ab1d429a7de1ccda8166d619f90ace6ea
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Tue Mar 5 15:19:11 2019 +0100
Commit: Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Mar 5 15:19:11 2019 +0100
x86/pv: Don't have %cr4.fsgsbase active behind a guest kernels back
Currently, a 64bit PV guest can appear to set and clear FSGSBASE in %cr4,
but
the bit remains set in hardware. Therefore, the {RD,WR}{FS,GS}BASE are
usable
even when the guest kernel believes that they are disabled.
The FSGSBASE feature isn't currently supported in Linux, and its context
switch path has some optimisations which rely on userspace being unable to
use
the WR{FS,GS}BASE instructions. Xen's current behaviour undermines this
expectation.
In 64bit PV guest context, always load the guest kernels setting of FSGSBASE
into %cr4. This requires adjusting how Xen uses the {RD,WR}{FS,GS}BASE
instructions.
* Delete the cpu_has_fsgsbase helper. It is no longer safe, as users need
to
check %cr4 directly.
* The raw __rd{fs,gs}base() helpers are only safe to use when %cr4.fsgsbase
is set. Comment this property.
* The {rd,wr}{fs,gs}{base,shadow}() and read_msr() helpers are updated to
use
the current %cr4 value to determine which mechanism to use.
* toggle_guest_mode() and save_segments() are update to avoid reading
fs/gsbase if the values in hardware cannot be stale WRT struct vcpu. A
consequence of this is that the write_cr() path needs to cache the
current
bases, as subsequent context switches will skip saving the values.
* write_cr4() is updated to ensure that the shadow %cr4.fsgsbase value is
observed in a safe way WRT the hardware setting, if an interrupt happens
to
hit in the middle.
* load_segments() is updated to use the VMLOAD optimisation if FSGSBASE is
unavailable, even if only gs_shadow needs updating. As a minor perf
improvement, check cpu_has_svm first to short circuit a context-dependent
conditional on Intel hardware.
* pv_make_cr4() is updated for 64bit PV guests to use the guest kernels
choice of FSGSBASE.
This is part of XSA-293.
Reported-by: Andy Lutomirski <luto@xxxxxxxxxx>
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
master commit: eccc170053e46b4ab1d9e7485c09e210be15bbd7
master date: 2019-03-05 13:54:05 +0100
---
xen/arch/x86/domain.c | 3 ++-
xen/arch/x86/pv/domain.c | 13 ++++++++++++-
xen/arch/x86/pv/emul-priv-op.c | 18 +++++++++++++++---
xen/arch/x86/setup.c | 2 +-
xen/include/asm-x86/cpufeature.h | 1 -
xen/include/asm-x86/msr.h | 16 ++++++++++++----
xen/include/asm-x86/processor.h | 24 ++++++++++++++++++++++--
7 files changed, 64 insertions(+), 13 deletions(-)
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index 853b52402e..91c2b1c21a 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -1431,7 +1431,8 @@ static void save_segments(struct vcpu *v)
regs->fs = read_sreg(fs);
regs->gs = read_sreg(gs);
- if ( cpu_has_fsgsbase && !is_pv_32bit_vcpu(v) )
+ /* %fs/%gs bases can only be stale if WR{FS,GS}BASE are usable. */
+ if ( (read_cr4() & X86_CR4_FSGSBASE) && !is_pv_32bit_vcpu(v) )
{
v->arch.pv_vcpu.fs_base = __rdfsbase();
if ( v->arch.flags & TF_kernel_mode )
diff --git a/xen/arch/x86/pv/domain.c b/xen/arch/x86/pv/domain.c
index a9caa011b4..82c6e2f4f2 100644
--- a/xen/arch/x86/pv/domain.c
+++ b/xen/arch/x86/pv/domain.c
@@ -146,6 +146,16 @@ unsigned long pv_make_cr4(const struct vcpu *v)
if ( d->arch.vtsc || (v->arch.pv_vcpu.ctrlreg[4] & X86_CR4_TSD) )
cr4 |= X86_CR4_TSD;
+ /*
+ * The {RD,WR}{FS,GS}BASE are only useable in 64bit code segments. While
+ * we must not have CR4.FSGSBASE set behind the back of a 64bit PV kernel,
+ * we do leave it set in 32bit PV context to speed up Xen's context switch
+ * path.
+ */
+ if ( !is_pv_32bit_domain(d) &&
+ !(v->arch.pv_vcpu.ctrlreg[4] & X86_CR4_FSGSBASE) )
+ cr4 &= ~X86_CR4_FSGSBASE;
+
return cr4;
}
@@ -351,7 +361,8 @@ void toggle_guest_mode(struct vcpu *v)
if ( is_pv_32bit_vcpu(v) )
return;
- if ( cpu_has_fsgsbase )
+ /* %fs/%gs bases can only be stale if WR{FS,GS}BASE are usable. */
+ if ( read_cr4() & X86_CR4_FSGSBASE )
{
if ( v->arch.flags & TF_kernel_mode )
v->arch.pv_vcpu.gs_base_kernel = __rdgsbase();
diff --git a/xen/arch/x86/pv/emul-priv-op.c b/xen/arch/x86/pv/emul-priv-op.c
index cd0457471c..0344c987e1 100644
--- a/xen/arch/x86/pv/emul-priv-op.c
+++ b/xen/arch/x86/pv/emul-priv-op.c
@@ -805,6 +805,17 @@ static int write_cr(unsigned int reg, unsigned long val,
}
case 4: /* Write CR4 */
+ /*
+ * If this write will disable FSGSBASE, refresh Xen's idea of the
+ * guest bases now that they can no longer change.
+ */
+ if ( (curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_FSGSBASE) &&
+ !(val & X86_CR4_FSGSBASE) )
+ {
+ curr->arch.pv_vcpu.fs_base = __rdfsbase();
+ curr->arch.pv_vcpu.gs_base_kernel = __rdgsbase();
+ }
+
curr->arch.pv_vcpu.ctrlreg[4] = pv_fixup_guest_cr4(curr, val);
write_cr4(pv_make_cr4(curr));
ctxt_switch_levelling(curr);
@@ -854,14 +865,15 @@ static int read_msr(unsigned int reg, uint64_t *val,
case MSR_FS_BASE:
if ( is_pv_32bit_domain(currd) )
break;
- *val = cpu_has_fsgsbase ? __rdfsbase() : curr->arch.pv_vcpu.fs_base;
+ *val = (read_cr4() & X86_CR4_FSGSBASE) ? __rdfsbase()
+ : curr->arch.pv_vcpu.fs_base;
return X86EMUL_OKAY;
case MSR_GS_BASE:
if ( is_pv_32bit_domain(currd) )
break;
- *val = cpu_has_fsgsbase ? __rdgsbase()
- : curr->arch.pv_vcpu.gs_base_kernel;
+ *val = (read_cr4() & X86_CR4_FSGSBASE) ? __rdgsbase()
+ :
curr->arch.pv_vcpu.gs_base_kernel;
return X86EMUL_OKAY;
case MSR_SHADOW_GS_BASE:
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 617dbb18c9..7903204761 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -1560,7 +1560,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
cr4_pv32_mask = mmu_cr4_features & XEN_CR4_PV32_BITS;
- if ( cpu_has_fsgsbase )
+ if ( boot_cpu_has(X86_FEATURE_FSGSBASE) )
set_in_cr4(X86_CR4_FSGSBASE);
if ( opt_invpcid && cpu_has_invpcid )
diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
index ff6f969e74..50432311ea 100644
--- a/xen/include/asm-x86/cpufeature.h
+++ b/xen/include/asm-x86/cpufeature.h
@@ -84,7 +84,6 @@
#define cpu_has_xsaves boot_cpu_has(X86_FEATURE_XSAVES)
/* CPUID level 0x00000007:0.ebx */
-#define cpu_has_fsgsbase boot_cpu_has(X86_FEATURE_FSGSBASE)
#define cpu_has_bmi1 boot_cpu_has(X86_FEATURE_BMI1)
#define cpu_has_hle boot_cpu_has(X86_FEATURE_HLE)
#define cpu_has_avx2 boot_cpu_has(X86_FEATURE_AVX2)
diff --git a/xen/include/asm-x86/msr.h b/xen/include/asm-x86/msr.h
index 22d5b7181e..143eea3457 100644
--- a/xen/include/asm-x86/msr.h
+++ b/xen/include/asm-x86/msr.h
@@ -120,6 +120,14 @@ static inline uint64_t rdtsc_ordered(void)
: "=a" (low), "=d" (high) \
: "c" (counter))
+/*
+ * On hardware supporting FSGSBASE, the value loaded into hardware is the
+ * guest kernel's choice for 64bit PV guests (Xen's choice for Idle, HVM and
+ * 32bit PV).
+ *
+ * Therefore, the {RD,WR}{FS,GS}BASE instructions are only safe to use if
+ * %cr4.fsgsbase is set.
+ */
static inline unsigned long __rdfsbase(void)
{
unsigned long base;
@@ -150,7 +158,7 @@ static inline unsigned long rdfsbase(void)
{
unsigned long base;
- if ( cpu_has_fsgsbase )
+ if ( read_cr4() & X86_CR4_FSGSBASE )
return __rdfsbase();
rdmsrl(MSR_FS_BASE, base);
@@ -162,7 +170,7 @@ static inline unsigned long rdgsbase(void)
{
unsigned long base;
- if ( cpu_has_fsgsbase )
+ if ( read_cr4() & X86_CR4_FSGSBASE )
return __rdgsbase();
rdmsrl(MSR_GS_BASE, base);
@@ -172,7 +180,7 @@ static inline unsigned long rdgsbase(void)
static inline void wrfsbase(unsigned long base)
{
- if ( cpu_has_fsgsbase )
+ if ( read_cr4() & X86_CR4_FSGSBASE )
#ifdef HAVE_GAS_FSGSBASE
asm volatile ( "wrfsbase %0" :: "r" (base) );
#else
@@ -184,7 +192,7 @@ static inline void wrfsbase(unsigned long base)
static inline void wrgsbase(unsigned long base)
{
- if ( cpu_has_fsgsbase )
+ if ( read_cr4() & X86_CR4_FSGSBASE )
#ifdef HAVE_GAS_FSGSBASE
asm volatile ( "wrgsbase %0" :: "r" (base) );
#else
diff --git a/xen/include/asm-x86/processor.h b/xen/include/asm-x86/processor.h
index 90a2701d26..a0f8bf47e5 100644
--- a/xen/include/asm-x86/processor.h
+++ b/xen/include/asm-x86/processor.h
@@ -315,11 +315,31 @@ static inline unsigned long read_cr4(void)
static inline void write_cr4(unsigned long val)
{
+ struct cpu_info *info = get_cpu_info();
+
/* No global pages in case of PCIDs enabled! */
ASSERT(!(val & X86_CR4_PGE) || !(val & X86_CR4_PCIDE));
- get_cpu_info()->cr4 = val;
- asm volatile ( "mov %0,%%cr4" : : "r" (val) );
+ /*
+ * On hardware supporting FSGSBASE, the value in %cr4 is the kernel's
+ * choice for 64bit PV guests, which impacts whether Xen can use the
+ * instructions.
+ *
+ * The {rd,wr}{fs,gs}base() helpers use info->cr4 to work out whether it
+ * is safe to execute the {RD,WR}{FS,GS}BASE instruction, falling back to
+ * the MSR path if not. Some users require interrupt safety.
+ *
+ * If FSGSBASE is currently or about to become clear, reflect this in
+ * info->cr4 before updating %cr4, so an interrupt which hits in the
+ * middle won't observe FSGSBASE set in info->cr4 but clear in %cr4.
+ */
+ info->cr4 = val & (info->cr4 | ~X86_CR4_FSGSBASE);
+
+ asm volatile ( "mov %[val], %%cr4"
+ : "+m" (info->cr4) /* Force ordering without a barrier. */
+ : [val] "r" (val) );
+
+ info->cr4 = val;
}
/* Clear and set 'TS' bit respectively */
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.10
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |