[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen staging-4.9] x86/pv: Don't have %cr4.fsgsbase active behind a guest kernels back



commit ac3a5f89b19dfe14ba1ec97b6986715301dab290
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Tue Mar 5 15:31:44 2019 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Mar 5 15:31:44 2019 +0100

    x86/pv: Don't have %cr4.fsgsbase active behind a guest kernels back
    
    Currently, a 64bit PV guest can appear to set and clear FSGSBASE in %cr4, 
but
    the bit remains set in hardware.  Therefore, the {RD,WR}{FS,GS}BASE are 
usable
    even when the guest kernel believes that they are disabled.
    
    The FSGSBASE feature isn't currently supported in Linux, and its context
    switch path has some optimisations which rely on userspace being unable to 
use
    the WR{FS,GS}BASE instructions.  Xen's current behaviour undermines this
    expectation.
    
    In 64bit PV guest context, always load the guest kernels setting of FSGSBASE
    into %cr4.  This requires adjusting how Xen uses the {RD,WR}{FS,GS}BASE
    instructions.
    
     * Delete the cpu_has_fsgsbase helper.  It is no longer safe, as users need 
to
       check %cr4 directly.
     * The raw __rd{fs,gs}base() helpers are only safe to use when %cr4.fsgsbase
       is set.  Comment this property.
     * The {rd,wr}{fs,gs}{base,shadow}() and read_msr() helpers are updated to 
use
       the current %cr4 value to determine which mechanism to use.
     * toggle_guest_mode() and save_segments() are update to avoid reading
       fs/gsbase if the values in hardware cannot be stale WRT struct vcpu.  A
       consequence of this is that the write_cr() path needs to cache the 
current
       bases, as subsequent context switches will skip saving the values.
     * write_cr4() is updated to ensure that the shadow %cr4.fsgsbase value is
       observed in a safe way WRT the hardware setting, if an interrupt happens 
to
       hit in the middle.
     * load_segments() is updated to use the VMLOAD optimisation if FSGSBASE is
       unavailable, even if only gs_shadow needs updating.  As a minor perf
       improvement, check cpu_has_svm first to short circuit a context-dependent
       conditional on Intel hardware.
     * pv_make_cr4() is updated for 64bit PV guests to use the guest kernels
       choice of FSGSBASE.
    
    This is part of XSA-293.
    
    Reported-by: Andy Lutomirski <luto@xxxxxxxxxx>
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    master commit: eccc170053e46b4ab1d9e7485c09e210be15bbd7
    master date: 2019-03-05 13:54:05 +0100
---
 xen/arch/x86/domain.c            | 13 ++++++++++++-
 xen/arch/x86/setup.c             |  2 +-
 xen/arch/x86/traps.c             | 18 +++++++++++++++---
 xen/arch/x86/x86_64/traps.c      |  4 +++-
 xen/include/asm-x86/cpufeature.h |  1 -
 xen/include/asm-x86/msr.h        | 16 ++++++++++++----
 xen/include/asm-x86/processor.h  | 24 ++++++++++++++++++++++--
 7 files changed, 65 insertions(+), 13 deletions(-)

diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index e9b95e4174..b1e2cfa27e 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -441,6 +441,16 @@ unsigned long pv_make_cr4(const struct vcpu *v)
     if ( d->arch.vtsc || (v->arch.pv_vcpu.ctrlreg[4] & X86_CR4_TSD) )
         cr4 |= X86_CR4_TSD;
 
+    /*
+     * The {RD,WR}{FS,GS}BASE are only useable in 64bit code segments.  While
+     * we must not have CR4.FSGSBASE set behind the back of a 64bit PV kernel,
+     * we do leave it set in 32bit PV context to speed up Xen's context switch
+     * path.
+     */
+    if ( !is_pv_32bit_domain(d) &&
+         !(v->arch.pv_vcpu.ctrlreg[4] & X86_CR4_FSGSBASE) )
+        cr4 &= ~X86_CR4_FSGSBASE;
+
     return cr4;
 }
 
@@ -1987,7 +1997,8 @@ static void save_segments(struct vcpu *v)
     regs->fs = read_sreg(fs);
     regs->gs = read_sreg(gs);
 
-    if ( cpu_has_fsgsbase && !is_pv_32bit_vcpu(v) )
+    /* %fs/%gs bases can only be stale if WR{FS,GS}BASE are usable. */
+    if ( (read_cr4() & X86_CR4_FSGSBASE) && !is_pv_32bit_vcpu(v) )
     {
         v->arch.pv_vcpu.fs_base = __rdfsbase();
         if ( v->arch.flags & TF_kernel_mode )
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index bf5ed1fd33..40af7e65d4 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -1510,7 +1510,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
 
     cr4_pv32_mask = mmu_cr4_features & XEN_CR4_PV32_BITS;
 
-    if ( cpu_has_fsgsbase )
+    if ( boot_cpu_has(X86_FEATURE_FSGSBASE) )
         set_in_cr4(X86_CR4_FSGSBASE);
 
     if ( opt_invpcid && cpu_has_invpcid )
diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c
index dc5a0d643e..2f9f75f7be 100644
--- a/xen/arch/x86/traps.c
+++ b/xen/arch/x86/traps.c
@@ -2486,6 +2486,17 @@ static int priv_op_write_cr(unsigned int reg, unsigned 
long val,
     }
 
     case 4: /* Write CR4 */
+        /*
+         * If this write will disable FSGSBASE, refresh Xen's idea of the
+         * guest bases now that they can no longer change.
+         */
+        if ( (curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_FSGSBASE) &&
+             !(val & X86_CR4_FSGSBASE) )
+        {
+            curr->arch.pv_vcpu.fs_base = __rdfsbase();
+            curr->arch.pv_vcpu.gs_base_kernel = __rdgsbase();
+        }
+
         curr->arch.pv_vcpu.ctrlreg[4] = pv_fixup_guest_cr4(curr, val);
         write_cr4(pv_make_cr4(curr));
         ctxt_switch_levelling(curr);
@@ -2526,14 +2537,15 @@ static int priv_op_read_msr(unsigned int reg, uint64_t 
*val,
     case MSR_FS_BASE:
         if ( is_pv_32bit_domain(currd) )
             break;
-        *val = cpu_has_fsgsbase ? __rdfsbase() : curr->arch.pv_vcpu.fs_base;
+        *val = (read_cr4() & X86_CR4_FSGSBASE) ? __rdfsbase()
+                                               : curr->arch.pv_vcpu.fs_base;
         return X86EMUL_OKAY;
 
     case MSR_GS_BASE:
         if ( is_pv_32bit_domain(currd) )
             break;
-        *val = cpu_has_fsgsbase ? __rdgsbase()
-                                : curr->arch.pv_vcpu.gs_base_kernel;
+        *val = (read_cr4() & X86_CR4_FSGSBASE) ? __rdgsbase()
+                                               : 
curr->arch.pv_vcpu.gs_base_kernel;
         return X86EMUL_OKAY;
 
     case MSR_SHADOW_GS_BASE:
diff --git a/xen/arch/x86/x86_64/traps.c b/xen/arch/x86/x86_64/traps.c
index 8a06b21b02..67a9993641 100644
--- a/xen/arch/x86/x86_64/traps.c
+++ b/xen/arch/x86/x86_64/traps.c
@@ -266,7 +266,9 @@ void toggle_guest_mode(struct vcpu *v)
 {
     if ( is_pv_32bit_vcpu(v) )
         return;
-    if ( cpu_has_fsgsbase )
+
+    /* %fs/%gs bases can only be stale if WR{FS,GS}BASE are usable. */
+    if ( read_cr4() & X86_CR4_FSGSBASE )
     {
         if ( v->arch.flags & TF_kernel_mode )
             v->arch.pv_vcpu.gs_base_kernel = __rdgsbase();
diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
index ff6f969e74..50432311ea 100644
--- a/xen/include/asm-x86/cpufeature.h
+++ b/xen/include/asm-x86/cpufeature.h
@@ -84,7 +84,6 @@
 #define cpu_has_xsaves          boot_cpu_has(X86_FEATURE_XSAVES)
 
 /* CPUID level 0x00000007:0.ebx */
-#define cpu_has_fsgsbase        boot_cpu_has(X86_FEATURE_FSGSBASE)
 #define cpu_has_bmi1            boot_cpu_has(X86_FEATURE_BMI1)
 #define cpu_has_hle             boot_cpu_has(X86_FEATURE_HLE)
 #define cpu_has_avx2            boot_cpu_has(X86_FEATURE_AVX2)
diff --git a/xen/include/asm-x86/msr.h b/xen/include/asm-x86/msr.h
index 8d4de61d09..fe6d5a0e6d 100644
--- a/xen/include/asm-x86/msr.h
+++ b/xen/include/asm-x86/msr.h
@@ -120,6 +120,14 @@ static inline uint64_t rdtsc_ordered(void)
                          : "=a" (low), "=d" (high) \
                          : "c" (counter))
 
+/*
+ * On hardware supporting FSGSBASE, the value loaded into hardware is the
+ * guest kernel's choice for 64bit PV guests (Xen's choice for Idle, HVM and
+ * 32bit PV).
+ *
+ * Therefore, the {RD,WR}{FS,GS}BASE instructions are only safe to use if
+ * %cr4.fsgsbase is set.
+ */
 static inline unsigned long __rdfsbase(void)
 {
     unsigned long base;
@@ -150,7 +158,7 @@ static inline unsigned long rdfsbase(void)
 {
     unsigned long base;
 
-    if ( cpu_has_fsgsbase )
+    if ( read_cr4() & X86_CR4_FSGSBASE )
         return __rdfsbase();
 
     rdmsrl(MSR_FS_BASE, base);
@@ -162,7 +170,7 @@ static inline unsigned long rdgsbase(void)
 {
     unsigned long base;
 
-    if ( cpu_has_fsgsbase )
+    if ( read_cr4() & X86_CR4_FSGSBASE )
         return __rdgsbase();
 
     rdmsrl(MSR_GS_BASE, base);
@@ -172,7 +180,7 @@ static inline unsigned long rdgsbase(void)
 
 static inline void wrfsbase(unsigned long base)
 {
-    if ( cpu_has_fsgsbase )
+    if ( read_cr4() & X86_CR4_FSGSBASE )
 #ifdef HAVE_GAS_FSGSBASE
         asm volatile ( "wrfsbase %0" :: "r" (base) );
 #else
@@ -184,7 +192,7 @@ static inline void wrfsbase(unsigned long base)
 
 static inline void wrgsbase(unsigned long base)
 {
-    if ( cpu_has_fsgsbase )
+    if ( read_cr4() & X86_CR4_FSGSBASE )
 #ifdef HAVE_GAS_FSGSBASE
         asm volatile ( "wrgsbase %0" :: "r" (base) );
 #else
diff --git a/xen/include/asm-x86/processor.h b/xen/include/asm-x86/processor.h
index da42e842b4..4487347713 100644
--- a/xen/include/asm-x86/processor.h
+++ b/xen/include/asm-x86/processor.h
@@ -306,11 +306,31 @@ static inline unsigned long read_cr4(void)
 
 static inline void write_cr4(unsigned long val)
 {
+    struct cpu_info *info = get_cpu_info();
+
     /* No global pages in case of PCIDs enabled! */
     ASSERT(!(val & X86_CR4_PGE) || !(val & X86_CR4_PCIDE));
 
-    get_cpu_info()->cr4 = val;
-    asm volatile ( "mov %0,%%cr4" : : "r" (val) );
+    /*
+     * On hardware supporting FSGSBASE, the value in %cr4 is the kernel's
+     * choice for 64bit PV guests, which impacts whether Xen can use the
+     * instructions.
+     *
+     * The {rd,wr}{fs,gs}base() helpers use info->cr4 to work out whether it
+     * is safe to execute the {RD,WR}{FS,GS}BASE instruction, falling back to
+     * the MSR path if not.  Some users require interrupt safety.
+     *
+     * If FSGSBASE is currently or about to become clear, reflect this in
+     * info->cr4 before updating %cr4, so an interrupt which hits in the
+     * middle won't observe FSGSBASE set in info->cr4 but clear in %cr4.
+     */
+    info->cr4 = val & (info->cr4 | ~X86_CR4_FSGSBASE);
+
+    asm volatile ( "mov %[val], %%cr4"
+                   : "+m" (info->cr4) /* Force ordering without a barrier. */
+                   : [val] "r" (val) );
+
+    info->cr4 = val;
 }
 
 /* Clear and set 'TS' bit respectively */
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.9

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.