[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen staging] xen/sched: don't disable scheduler on cpus during suspend



commit 0763cd2687897b55e7a87ff6e77f785136bcc2de
Author:     Juergen Gross <jgross@xxxxxxxx>
AuthorDate: Tue Apr 2 07:34:57 2019 +0200
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Thu Apr 4 11:10:12 2019 +0100

    xen/sched: don't disable scheduler on cpus during suspend
    
    Today there is special handling in cpu_disable_scheduler() for suspend
    by forcing all vcpus to the boot cpu. In fact there is no need for that
    as during resume the vcpus are put on the correct cpus again.
    
    So we can just omit the call of cpu_disable_scheduler() when offlining
    a cpu due to suspend and on resuming we can omit taking the schedule
    lock for selecting the new processor.
    
    In restore_vcpu_affinity() we should be careful when applying affinity
    as the cpu might not have come back to life. This in turn enables us
    to even support affinity_broken across suspend/resume.
    
    Avoid all other scheduler dealloc - alloc dance when doing suspend and
    resume, too. It is enough to react on cpus failing to come up on resume
    again.
    
    Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
    Reviewed-by: Dario Faggioli <dfaggioli@xxxxxxxx>
---
 xen/common/schedule.c | 161 ++++++++++++++++----------------------------------
 1 file changed, 52 insertions(+), 109 deletions(-)

diff --git a/xen/common/schedule.c b/xen/common/schedule.c
index 86bd10945d..a418506c6b 100644
--- a/xen/common/schedule.c
+++ b/xen/common/schedule.c
@@ -561,33 +561,6 @@ static void vcpu_move_locked(struct vcpu *v, unsigned int 
new_cpu)
 }
 
 /*
- * Move a vcpu from its current processor to a target new processor,
- * without asking the scheduler to do any placement. This is intended
- * for being called from special contexts, where things are quiet
- * enough that no contention is supposed to happen (i.e., during
- * shutdown or software suspend, like ACPI S3).
- */
-static void vcpu_move_nosched(struct vcpu *v, unsigned int new_cpu)
-{
-    unsigned long flags;
-    spinlock_t *lock, *new_lock;
-
-    ASSERT(system_state == SYS_STATE_suspend);
-    ASSERT(!vcpu_runnable(v) && (atomic_read(&v->pause_count) ||
-                                 atomic_read(&v->domain->pause_count)));
-
-    lock = per_cpu(schedule_data, v->processor).schedule_lock;
-    new_lock = per_cpu(schedule_data, new_cpu).schedule_lock;
-
-    sched_spin_lock_double(lock, new_lock, &flags);
-    ASSERT(new_cpu != v->processor);
-    vcpu_move_locked(v, new_cpu);
-    sched_spin_unlock_double(lock, new_lock, flags);
-
-    sched_move_irqs(v);
-}
-
-/*
  * Initiating migration
  *
  * In order to migrate, we need the vcpu in question to have stopped
@@ -735,31 +708,36 @@ void restore_vcpu_affinity(struct domain *d)
 
         ASSERT(!vcpu_runnable(v));
 
-        lock = vcpu_schedule_lock_irq(v);
-
-        if ( v->affinity_broken )
-        {
-            sched_set_affinity(v, v->cpu_hard_affinity_saved, NULL);
-            v->affinity_broken = 0;
-
-        }
-
         /*
-         * During suspend (in cpu_disable_scheduler()), we moved every vCPU
-         * to BSP (which, as of now, is pCPU 0), as a temporary measure to
-         * allow the nonboot processors to have their data structure freed
-         * and go to sleep. But nothing guardantees that the BSP is a valid
-         * pCPU for a particular domain.
+         * Re-assign the initial processor as after resume we have no
+         * guarantee the old processor has come back to life again.
          *
          * Therefore, here, before actually unpausing the domains, we should
          * set v->processor of each of their vCPUs to something that will
          * make sense for the scheduler of the cpupool in which they are in.
          */
         cpumask_and(cpumask_scratch_cpu(cpu), v->cpu_hard_affinity,
-                    cpupool_domain_cpumask(v->domain));
-        v->processor = cpumask_any(cpumask_scratch_cpu(cpu));
+                    cpupool_domain_cpumask(d));
+        if ( cpumask_empty(cpumask_scratch_cpu(cpu)) )
+        {
+            if ( v->affinity_broken )
+            {
+                sched_set_affinity(v, v->cpu_hard_affinity_saved, NULL);
+                v->affinity_broken = 0;
+                cpumask_and(cpumask_scratch_cpu(cpu), v->cpu_hard_affinity,
+                            cpupool_domain_cpumask(d));
+            }
 
-        spin_unlock_irq(lock);
+            if ( cpumask_empty(cpumask_scratch_cpu(cpu)) )
+            {
+                printk(XENLOG_DEBUG "Breaking affinity for %pv\n", v);
+                sched_set_affinity(v, &cpumask_all, NULL);
+                cpumask_and(cpumask_scratch_cpu(cpu), v->cpu_hard_affinity,
+                            cpupool_domain_cpumask(d));
+            }
+        }
+
+        v->processor = cpumask_any(cpumask_scratch_cpu(cpu));
 
         lock = vcpu_schedule_lock_irq(v);
         v->processor = SCHED_OP(vcpu_scheduler(v), pick_cpu, v);
@@ -783,7 +761,6 @@ int cpu_disable_scheduler(unsigned int cpu)
     struct vcpu *v;
     struct cpupool *c;
     cpumask_t online_affinity;
-    unsigned int new_cpu;
     int ret = 0;
 
     c = per_cpu(cpupool, cpu);
@@ -809,14 +786,7 @@ int cpu_disable_scheduler(unsigned int cpu)
                     break;
                 }
 
-                if (system_state == SYS_STATE_suspend)
-                {
-                    cpumask_copy(v->cpu_hard_affinity_saved,
-                                 v->cpu_hard_affinity);
-                    v->affinity_broken = 1;
-                }
-                else
-                    printk(XENLOG_DEBUG "Breaking affinity for %pv\n", v);
+                printk(XENLOG_DEBUG "Breaking affinity for %pv\n", v);
 
                 sched_set_affinity(v, &cpumask_all, NULL);
             }
@@ -828,60 +798,26 @@ int cpu_disable_scheduler(unsigned int cpu)
                 continue;
             }
 
-            /* If it is on this cpu, we must send it away. */
-            if ( unlikely(system_state == SYS_STATE_suspend) )
-            {
-                vcpu_schedule_unlock_irqrestore(lock, flags, v);
-
-                /*
-                 * If we are doing a shutdown/suspend, it is not necessary to
-                 * ask the scheduler to chime in. In fact:
-                 *  * there is no reason for it: the end result we are after
-                 *    is just 'all the vcpus on the boot pcpu, and no vcpu
-                 *    anywhere else', so let's just go for it;
-                 *  * it's wrong, for cpupools with only non-boot pcpus, as
-                 *    the scheduler would always fail to send the vcpus away
-                 *    from the last online (non boot) pcpu!
-                 *
-                 * Therefore, in the shutdown/suspend case, we just pick up
-                 * one (still) online pcpu. Note that, at this stage, all
-                 * domains (including dom0) have been paused already, so we
-                 * do not expect any vcpu activity at all.
-                 */
-                cpumask_andnot(&online_affinity, &cpu_online_map,
-                               cpumask_of(cpu));
-                BUG_ON(cpumask_empty(&online_affinity));
-                /*
-                 * As boot cpu is, usually, pcpu #0, using cpumask_first()
-                 * will make us converge quicker.
-                 */
-                new_cpu = cpumask_first(&online_affinity);
-                vcpu_move_nosched(v, new_cpu);
-            }
-            else
-            {
-                /*
-                 * OTOH, if the system is still live, and we are here because
-                 * we are doing some cpupool manipulations:
-                 *  * we want to call the scheduler, and let it re-evaluation
-                 *    the placement of the vcpu, taking into account the new
-                 *    cpupool configuration;
-                 *  * the scheduler will always fine a suitable solution, or
-                 *    things would have failed before getting in here.
-                 */
-                vcpu_migrate_start(v);
-                vcpu_schedule_unlock_irqrestore(lock, flags, v);
+            /* If it is on this cpu, we must send it away.
+             * We are doing some cpupool manipulations:
+             *  * we want to call the scheduler, and let it re-evaluation
+             *    the placement of the vcpu, taking into account the new
+             *    cpupool configuration;
+             *  * the scheduler will always find a suitable solution, or
+             *    things would have failed before getting in here.
+             */
+            vcpu_migrate_start(v);
+            vcpu_schedule_unlock_irqrestore(lock, flags, v);
 
-                vcpu_migrate_finish(v);
+            vcpu_migrate_finish(v);
 
-                /*
-                 * The only caveat, in this case, is that if a vcpu active in
-                 * the hypervisor isn't migratable. In this case, the caller
-                 * should try again after releasing and reaquiring all locks.
-                 */
-                if ( v->processor == cpu )
-                    ret = -EAGAIN;
-            }
+            /*
+             * The only caveat, in this case, is that if a vcpu active in
+             * the hypervisor isn't migratable. In this case, the caller
+             * should try again after releasing and reaquiring all locks.
+             */
+            if ( v->processor == cpu )
+                ret = -EAGAIN;
         }
     }
 
@@ -1742,26 +1678,33 @@ static int cpu_schedule_callback(
     switch ( action )
     {
     case CPU_STARTING:
-        SCHED_OP(sched, init_pdata, sd->sched_priv, cpu);
+        if ( system_state != SYS_STATE_resume )
+            SCHED_OP(sched, init_pdata, sd->sched_priv, cpu);
         break;
     case CPU_UP_PREPARE:
-        rc = cpu_schedule_up(cpu);
+        if ( system_state != SYS_STATE_resume )
+            rc = cpu_schedule_up(cpu);
         break;
     case CPU_DOWN_PREPARE:
         rcu_read_lock(&domlist_read_lock);
         rc = cpu_disable_scheduler_check(cpu);
         rcu_read_unlock(&domlist_read_lock);
         break;
+    case CPU_RESUME_FAILED:
     case CPU_DEAD:
+        if ( system_state == SYS_STATE_suspend )
+            break;
         rcu_read_lock(&domlist_read_lock);
         rc = cpu_disable_scheduler(cpu);
         BUG_ON(rc);
         rcu_read_unlock(&domlist_read_lock);
         SCHED_OP(sched, deinit_pdata, sd->sched_priv, cpu);
-        /* Fallthrough */
-    case CPU_UP_CANCELED:
         cpu_schedule_down(cpu);
         break;
+    case CPU_UP_CANCELED:
+        if ( system_state != SYS_STATE_resume )
+            cpu_schedule_down(cpu);
+        break;
     default:
         break;
     }
--
generated by git-patchbot for /home/xen/git/xen.git#staging

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.