|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging] xen/arm: optee: add std call handling
commit c688a8afb2649d955139e7d0d2a86a75fe93fa7e
Author: Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx>
AuthorDate: Tue Jun 11 18:46:33 2019 +0000
Commit: Julien Grall <julien.grall@xxxxxxx>
CommitDate: Wed Jun 19 12:05:04 2019 +0100
xen/arm: optee: add std call handling
The main way to communicate with OP-TEE is to issue standard SMCCC
call. "Standard" is a SMCCC term and it means that call can be
interrupted and OP-TEE can return control to NW before completing
the call.
In contrast with fast calls, where arguments and return values
are passed in registers, standard calls use shared memory. Register
pair a1,a2 holds 64-bit PA of command buffer, where all arguments
are stored and which is used to return data. OP-TEE internally
copies contents of this buffer into own secure memory before accessing
and validating any data in command buffer. This is done to make sure
that NW will not change contents of the validated parameters.
Mediator needs to do the same for number of reasons:
1. To make sure that guest will not change data after validation.
2. To translate IPAs to PAs in the command buffer (this is not done
in this patch).
3. To hide translated address from guest, so it will not be able
to do IPA->PA translation by misusing mediator.
During standard call OP-TEE can issue multiple "RPC returns", asking
NW to do some work for OP-TEE. NW then issues special call
OPTEE_SMC_CALL_RETURN_FROM_RPC to resume handling of the original call.
Thus, mediator needs to maintain context for original standard call
during multiple SMCCC calls.
Standard call is considered complete, when returned value is
not a RPC request.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxx>
---
xen/arch/arm/tee/optee.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 507 insertions(+), 3 deletions(-)
diff --git a/xen/arch/arm/tee/optee.c b/xen/arch/arm/tee/optee.c
index 6c51caa41a..f092492849 100644
--- a/xen/arch/arm/tee/optee.c
+++ b/xen/arch/arm/tee/optee.c
@@ -25,8 +25,13 @@
*/
#include <xen/device_tree.h>
+#include <xen/domain_page.h>
+#include <xen/err.h>
+#include <xen/guest_access.h>
+#include <xen/mm.h>
#include <xen/sched.h>
+#include <asm/event.h>
#include <asm/smccc.h>
#include <asm/tee/tee.h>
#include <asm/tee/optee_msg.h>
@@ -35,6 +40,19 @@
/* Number of SMCs known to the mediator */
#define OPTEE_MEDIATOR_SMC_COUNT 11
+/*
+ * "The return code is an error that originated within the underlying
+ * communications stack linking the rich OS with the TEE" as described
+ * in GP TEE Client API Specification.
+ */
+#define TEEC_ORIGIN_COMMS 0x00000002
+
+/*
+ * "Input parameters were invalid" as described
+ * in GP TEE Client API Specification.
+ */
+#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+
/* Client ID 0 is reserved for the hypervisor itself */
#define OPTEE_CLIENT_ID(domain) ((domain)->domain_id + 1)
@@ -43,8 +61,31 @@
OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM | \
OPTEE_SMC_SEC_CAP_DYNAMIC_SHM)
+static unsigned int __read_mostly max_optee_threads;
+
+/*
+ * Call context. OP-TEE can issue multiple RPC returns during one call.
+ * We need to preserve context during them.
+ */
+struct optee_std_call {
+ struct list_head list;
+ /* Page where shadowed copy of call arguments is stored */
+ struct page_info *xen_arg_pg;
+ /* Above page mapped into XEN */
+ struct optee_msg_arg *xen_arg;
+ /* Address of original call arguments */
+ paddr_t guest_arg_ipa;
+ int optee_thread_id;
+ int rpc_op;
+ bool in_flight;
+ register_t rpc_params[2];
+};
+
/* Domain context */
struct optee_domain {
+ struct list_head call_list;
+ atomic_t call_count;
+ spinlock_t lock;
};
static bool optee_probe(void)
@@ -66,6 +107,23 @@ static bool optee_probe(void)
(uint32_t)resp.a3 != OPTEE_MSG_UID_3 )
return false;
+ /* Read number of threads */
+ arm_smccc_smc(OPTEE_SMC_GET_THREAD_COUNT, &resp);
+ if ( resp.a0 == OPTEE_SMC_RETURN_OK )
+ {
+ max_optee_threads = resp.a1;
+ printk(XENLOG_INFO
+ "OP-TEE supports %u simultaneous threads per guest.\n",
+ max_optee_threads);
+ }
+ else
+ {
+ printk(XENLOG_ERR
+ "Can't read number of threads supported by OP-TEE: %x\n",
+ (uint32_t)resp.a0);
+ return false;
+ }
+
return true;
}
@@ -99,19 +157,164 @@ static int optee_domain_init(struct domain *d)
return -ENODEV;
}
+ INIT_LIST_HEAD(&ctx->call_list);
+ atomic_set(&ctx->call_count, 0);
+ spin_lock_init(&ctx->lock);
+
d->arch.tee = ctx;
return 0;
}
+static uint64_t regpair_to_uint64(register_t reg0, register_t reg1)
+{
+ return ((uint64_t)reg0 << 32) | (uint32_t)reg1;
+}
+
+static void uint64_to_regpair(register_t *reg0, register_t *reg1, uint64_t val)
+{
+ *reg0 = val >> 32;
+ *reg1 = (uint32_t)val;
+}
+
+static struct page_info *get_domain_ram_page(gfn_t gfn)
+{
+ struct page_info *page;
+ p2m_type_t t;
+
+ page = get_page_from_gfn(current->domain, gfn_x(gfn), &t, P2M_ALLOC);
+ if ( !page || t != p2m_ram_rw )
+ {
+ if ( page )
+ put_page(page);
+
+ return NULL;
+ }
+
+ return page;
+}
+
+static struct optee_std_call *allocate_std_call(struct optee_domain *ctx)
+{
+ struct optee_std_call *call;
+ int count;
+
+ /* Make sure that guest does not execute more than max_optee_threads */
+ count = atomic_add_unless(&ctx->call_count, 1, max_optee_threads);
+ if ( count == max_optee_threads )
+ return ERR_PTR(-ENOSPC);
+
+ call = xzalloc(struct optee_std_call);
+ if ( !call )
+ {
+ atomic_dec(&ctx->call_count);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ call->optee_thread_id = -1;
+ call->in_flight = true;
+
+ spin_lock(&ctx->lock);
+ list_add_tail(&call->list, &ctx->call_list);
+ spin_unlock(&ctx->lock);
+
+ return call;
+}
+
+static void free_std_call(struct optee_domain *ctx,
+ struct optee_std_call *call)
+{
+ atomic_dec(&ctx->call_count);
+
+ spin_lock(&ctx->lock);
+ list_del(&call->list);
+ spin_unlock(&ctx->lock);
+
+ ASSERT(!call->in_flight);
+ ASSERT(!call->xen_arg);
+
+ if ( call->xen_arg_pg )
+ free_domheap_page(call->xen_arg_pg);
+
+ xfree(call);
+}
+
+static void map_xen_arg(struct optee_std_call *call)
+{
+ ASSERT(!call->xen_arg);
+
+ call->xen_arg = __map_domain_page(call->xen_arg_pg);
+}
+
+static void unmap_xen_arg(struct optee_std_call *call)
+{
+ if ( !call->xen_arg )
+ return;
+
+ unmap_domain_page(call->xen_arg);
+ call->xen_arg = NULL;
+}
+
+static struct optee_std_call *get_std_call(struct optee_domain *ctx,
+ int thread_id)
+{
+ struct optee_std_call *call;
+
+ spin_lock(&ctx->lock);
+ list_for_each_entry( call, &ctx->call_list, list )
+ {
+ if ( call->optee_thread_id == thread_id )
+ {
+ if ( call->in_flight )
+ {
+ gdprintk(XENLOG_WARNING,
+ "Guest tries to execute call which is already in
flight.\n");
+ goto out;
+ }
+ call->in_flight = true;
+ spin_unlock(&ctx->lock);
+ map_xen_arg(call);
+
+ return call;
+ }
+ }
+
+out:
+ spin_unlock(&ctx->lock);
+
+ return NULL;
+}
+
+static void put_std_call(struct optee_domain *ctx, struct optee_std_call *call)
+{
+ ASSERT(call->in_flight);
+ unmap_xen_arg(call);
+ spin_lock(&ctx->lock);
+ call->in_flight = false;
+ spin_unlock(&ctx->lock);
+}
+
static int optee_relinquish_resources(struct domain *d)
{
struct arm_smccc_res resp;
+ struct optee_std_call *call, *call_tmp;
+ struct optee_domain *ctx = d->arch.tee;
- if ( !d->arch.tee )
+ if ( !ctx )
return 0;
/*
+ * We need to free up to max_optee_threads calls. Usually, this is
+ * no more than 8-16 calls. But it depends on OP-TEE configuration
+ * (CFG_NUM_THREADS option).
+ */
+ list_for_each_entry_safe( call, call_tmp, &ctx->call_list, list )
+ free_std_call(ctx, call);
+
+ if ( hypercall_preempt_check() )
+ return -ERESTART;
+
+ /*
* Inform OP-TEE that domain is shutting down. This is
* also a fast SMC call, like OPTEE_SMC_VM_CREATED, so
* it is also non-preemptible.
@@ -123,11 +326,308 @@ static int optee_relinquish_resources(struct domain *d)
arm_smccc_smc(OPTEE_SMC_VM_DESTROYED, OPTEE_CLIENT_ID(d), 0, 0, 0, 0, 0, 0,
&resp);
+ ASSERT(!spin_is_locked(&ctx->lock));
+ ASSERT(!atomic_read(&ctx->call_count));
+
XFREE(d->arch.tee);
return 0;
}
+/*
+ * Copy command buffer into domheap memory to:
+ * 1) Hide translated addresses from guest
+ * 2) Make sure that guest wouldn't change data in command buffer during call
+ */
+static bool copy_std_request(struct cpu_user_regs *regs,
+ struct optee_std_call *call)
+{
+ call->guest_arg_ipa = regpair_to_uint64(get_user_reg(regs, 1),
+ get_user_reg(regs, 2));
+
+ /*
+ * Command buffer should start at page boundary.
+ * This is OP-TEE ABI requirement.
+ */
+ if ( call->guest_arg_ipa & (OPTEE_MSG_NONCONTIG_PAGE_SIZE - 1) )
+ {
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_EBADADDR);
+ return false;
+ }
+
+ BUILD_BUG_ON(OPTEE_MSG_NONCONTIG_PAGE_SIZE > PAGE_SIZE);
+
+ call->xen_arg_pg = alloc_domheap_page(current->domain, 0);
+ if ( !call->xen_arg_pg )
+ {
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_ENOMEM);
+ return false;
+ }
+
+ map_xen_arg(call);
+
+ if ( access_guest_memory_by_ipa(current->domain, call->guest_arg_ipa,
+ call->xen_arg,
+ OPTEE_MSG_NONCONTIG_PAGE_SIZE, false) )
+ {
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_EBADADDR);
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Copy result of completed request back to guest's buffer.
+ * We are copying only values that subjected to change to minimize
+ * possible information leak.
+ *
+ * Because there can be multiple RPCs during standard call, and guest
+ * is not obligated to return from RPC immediately, there can be
+ * arbitrary time span between calling copy_std_request() and
+ * copy_std_request(). So we need to validate guest's command buffer
+ * again.
+ */
+static void copy_std_request_back(struct optee_domain *ctx,
+ struct cpu_user_regs *regs,
+ struct optee_std_call *call)
+{
+ struct optee_msg_arg *guest_arg;
+ struct page_info *page;
+ unsigned int i;
+ uint32_t attr;
+
+ page = get_domain_ram_page(gaddr_to_gfn(call->guest_arg_ipa));
+ if ( !page )
+ {
+ /*
+ * Guest did something to own command buffer during the call.
+ * Now we even can't write error code to the command
+ * buffer. Let's try to return generic error via
+ * register. Problem is that OP-TEE does not know that guest
+ * didn't received valid response. But at least guest will
+ * know that something bad happened.
+ */
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_EBADADDR);
+
+ return;
+ }
+
+ guest_arg = __map_domain_page(page);
+
+ guest_arg->ret = call->xen_arg->ret;
+ guest_arg->ret_origin = call->xen_arg->ret_origin;
+ guest_arg->session = call->xen_arg->session;
+
+ for ( i = 0; i < call->xen_arg->num_params; i++ )
+ {
+ attr = call->xen_arg->params[i].attr;
+
+ switch ( attr & OPTEE_MSG_ATTR_TYPE_MASK )
+ {
+ case OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_TMEM_INOUT:
+ guest_arg->params[i].u.tmem.size =
+ call->xen_arg->params[i].u.tmem.size;
+ continue;
+ case OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_RMEM_INOUT:
+ guest_arg->params[i].u.rmem.size =
+ call->xen_arg->params[i].u.rmem.size;
+ continue;
+ case OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_VALUE_INOUT:
+ guest_arg->params[i].u.value.a =
+ call->xen_arg->params[i].u.value.a;
+ guest_arg->params[i].u.value.b =
+ call->xen_arg->params[i].u.value.b;
+ guest_arg->params[i].u.value.c =
+ call->xen_arg->params[i].u.value.c;
+ continue;
+ case OPTEE_MSG_ATTR_TYPE_NONE:
+ case OPTEE_MSG_ATTR_TYPE_RMEM_INPUT:
+ case OPTEE_MSG_ATTR_TYPE_TMEM_INPUT:
+ continue;
+ }
+ }
+
+ unmap_domain_page(guest_arg);
+ put_page(page);
+}
+
+/* Handle RPC return from OP-TEE */
+static void handle_rpc_return(struct arm_smccc_res *res,
+ struct cpu_user_regs *regs,
+ struct optee_std_call *call)
+{
+ call->rpc_op = OPTEE_SMC_RETURN_GET_RPC_FUNC(res->a0);
+ call->rpc_params[0] = res->a1;
+ call->rpc_params[1] = res->a2;
+ call->optee_thread_id = res->a3;
+
+ set_user_reg(regs, 0, res->a0);
+ set_user_reg(regs, 1, res->a1);
+ set_user_reg(regs, 2, res->a2);
+ set_user_reg(regs, 3, res->a3);
+}
+
+/*
+ * (Re)start standard call. This function will be called in two cases:
+ * 1. Guest initiates new standard call
+ * 2. Guest finished RPC handling and asks OP-TEE to resume the call
+ *
+ * In any case OP-TEE can either complete call or issue another RPC.
+ * If this is RPC - we need to store call context and return back to guest.
+ * If call is complete - we need to return results with copy_std_request_back()
+ * and then we will destroy the call context as it is not needed anymore.
+ */
+static void do_call_with_arg(struct optee_domain *ctx,
+ struct optee_std_call *call,
+ struct cpu_user_regs *regs,
+ register_t a0, register_t a1, register_t a2,
+ register_t a3, register_t a4, register_t a5)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(a0, a1, a2, a3, a4, a5, 0, OPTEE_CLIENT_ID(current->domain),
+ &res);
+
+ if ( OPTEE_SMC_RETURN_IS_RPC(res.a0) )
+ {
+ handle_rpc_return(&res, regs, call);
+ put_std_call(ctx, call);
+
+ return;
+ }
+
+ copy_std_request_back(ctx, regs, call);
+ set_user_reg(regs, 0, res.a0);
+
+ put_std_call(ctx, call);
+ free_std_call(ctx, call);
+}
+
+/*
+ * Standard call handling. This is the main type of the call which
+ * makes OP-TEE useful. Most of the other calls type are utility
+ * calls, while standard calls are needed to interact with Trusted
+ * Applications which are running inside the OP-TEE.
+ *
+ * All arguments for this type of call are passed in the command
+ * buffer in the guest memory. We will copy this buffer into
+ * own shadow buffer and provide the copy to OP-TEE.
+ *
+ * This call is preemptible. OP-TEE will return from the call if there
+ * is an interrupt request pending. Also, OP-TEE will interrupt the
+ * call if it needs some service from guest. In both cases it will
+ * issue RPC, which is processed by handle_rpc_return() function.
+ */
+static void handle_std_call(struct optee_domain *ctx,
+ struct cpu_user_regs *regs)
+{
+ register_t a1, a2;
+ paddr_t xen_addr;
+ size_t arg_size;
+ struct optee_std_call *call = allocate_std_call(ctx);
+
+ if ( IS_ERR(call) )
+ {
+ if ( PTR_ERR(call) == -ENOMEM )
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_ENOMEM);
+ else
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_ETHREAD_LIMIT);
+
+ return;
+ }
+
+ if ( !copy_std_request(regs, call) )
+ goto err;
+
+ arg_size = OPTEE_MSG_GET_ARG_SIZE(call->xen_arg->num_params);
+ if ( arg_size > OPTEE_MSG_NONCONTIG_PAGE_SIZE )
+ {
+ call->xen_arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ call->xen_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ /* Make sure that copy_std_request_back() will stay within the buffer
*/
+ call->xen_arg->num_params = 0;
+
+ copy_std_request_back(ctx, regs, call);
+
+ goto err;
+ }
+
+ switch ( call->xen_arg->cmd )
+ {
+ case OPTEE_MSG_CMD_OPEN_SESSION:
+ case OPTEE_MSG_CMD_CLOSE_SESSION:
+ case OPTEE_MSG_CMD_INVOKE_COMMAND:
+ case OPTEE_MSG_CMD_CANCEL:
+ case OPTEE_MSG_CMD_REGISTER_SHM:
+ case OPTEE_MSG_CMD_UNREGISTER_SHM:
+ xen_addr = page_to_maddr(call->xen_arg_pg);
+ uint64_to_regpair(&a1, &a2, xen_addr);
+
+ do_call_with_arg(ctx, call, regs, OPTEE_SMC_CALL_WITH_ARG, a1, a2,
+ OPTEE_SMC_SHM_CACHED, 0, 0);
+ return;
+ default:
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_EBADCMD);
+ break;
+ }
+
+err:
+ put_std_call(ctx, call);
+ free_std_call(ctx, call);
+
+ return;
+}
+
+/*
+ * This function is called when guest is finished processing RPC
+ * request from OP-TEE and wished to resume the interrupted standard
+ * call.
+ */
+static void handle_rpc(struct optee_domain *ctx, struct cpu_user_regs *regs)
+{
+ struct optee_std_call *call;
+ int optee_thread_id = get_user_reg(regs, 3);
+
+ call = get_std_call(ctx, optee_thread_id);
+
+ if ( !call )
+ {
+ set_user_reg(regs, 0, OPTEE_SMC_RETURN_ERESUME);
+ return;
+ }
+
+ /*
+ * This is to prevent race between new call with the same thread id.
+ * OP-TEE can reuse thread id right after it finished handling the call,
+ * before XEN had chance to free old call context.
+ */
+ call->optee_thread_id = -1;
+
+ switch ( call->rpc_op )
+ {
+ case OPTEE_SMC_RPC_FUNC_ALLOC:
+ /* TODO: Add handling */
+ break;
+ case OPTEE_SMC_RPC_FUNC_FREE:
+ /* TODO: Add handling */
+ break;
+ case OPTEE_SMC_RPC_FUNC_FOREIGN_INTR:
+ break;
+ case OPTEE_SMC_RPC_FUNC_CMD:
+ /* TODO: Add handling */
+ break;
+ }
+
+ do_call_with_arg(ctx, call, regs, OPTEE_SMC_CALL_RETURN_FROM_RPC,
+ call->rpc_params[0], call->rpc_params[1],
+ optee_thread_id, 0, 0);
+ return;
+}
+
static void handle_exchange_capabilities(struct cpu_user_regs *regs)
{
struct arm_smccc_res resp;
@@ -166,8 +666,9 @@ static void handle_exchange_capabilities(struct
cpu_user_regs *regs)
static bool optee_handle_call(struct cpu_user_regs *regs)
{
struct arm_smccc_res resp;
+ struct optee_domain *ctx = current->domain->arch.tee;
- if ( !current->domain->arch.tee )
+ if ( !ctx )
return false;
switch ( get_user_reg(regs, 0) )
@@ -234,8 +735,11 @@ static bool optee_handle_call(struct cpu_user_regs *regs)
return true;
case OPTEE_SMC_CALL_WITH_ARG:
+ handle_std_call(ctx, regs);
+ return true;
+
case OPTEE_SMC_CALL_RETURN_FROM_RPC:
- set_user_reg(regs, 0, OPTEE_SMC_RETURN_ENOTAVAIL);
+ handle_rpc(ctx, regs);
return true;
default:
--
generated by git-patchbot for /home/xen/git/xen.git#staging
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |