|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] xen/arm: Rework HSCTLR_BASE
commit 04c9a21c7a502d1d148bee4771c3790ed4d505a0
Author: Julien Grall <julien.grall@xxxxxxx>
AuthorDate: Sat Apr 13 00:00:47 2019 +0100
Commit: Julien Grall <julien.grall@xxxxxxx>
CommitDate: Sun Jun 16 21:24:45 2019 +0100
xen/arm: Rework HSCTLR_BASE
The current value of HSCTLR_BASE for Arm64 is pretty wrong. It would
actually turn on SCTLR_EL2.nAA (bit 6) on hardware implementing
ARMv8.4-LSE.
Furthermore, the documentation of what is cleared/set in SCTLR_EL2 is
also not correct and looks like to be a verbatim copy from Arm32.
HSCTLR_BASE is replaced with a bunch of per-architecture new defines
helping to understand better what is the initial value for
SCTLR_EL2/HSCTLR.
Note the defines *_CLEAR are only used to check the state of each bits
are known.
Lastly, the documentation is dropped from arm{32,64}/head.S as it would
be pretty easy to get out-of-sync with the definitions.
Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
Reviewed-by: Andrii Anisov <andrii.anisov@xxxxxxxx>
Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
---
xen/arch/arm/arm32/head.S | 12 +--------
xen/arch/arm/arm64/head.S | 10 +-------
xen/include/asm-arm/processor.h | 56 ++++++++++++++++++++++++++++++++++++++++-
3 files changed, 57 insertions(+), 21 deletions(-)
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index 5f817d473e..18ded49a04 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -224,17 +224,7 @@ cpu_init_done:
ldr r0,
=(TCR_RES1|TCR_SH0_IS|TCR_ORGN0_WBWA|TCR_IRGN0_WBWA|TCR_T0SZ(0))
mcr CP32(r0, HTCR)
- /*
- * Set up the HSCTLR:
- * Exceptions in LE ARM,
- * Low-latency IRQs disabled,
- * Write-implies-XN disabled (for now),
- * D-cache disabled (for now),
- * I-cache enabled,
- * Alignment checking enabled,
- * MMU translation disabled (for now).
- */
- ldr r0, =(HSCTLR_BASE|SCTLR_Axx_ELx_A)
+ ldr r0, =HSCTLR_SET
mcr CP32(r0, HSCTLR)
/*
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index ddd3a33108..08094a273e 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -352,15 +352,7 @@ skip_bss:
msr tcr_el2, x0
- /* Set up the SCTLR_EL2:
- * Exceptions in LE ARM,
- * Low-latency IRQs disabled,
- * Write-implies-XN disabled (for now),
- * D-cache disabled (for now),
- * I-cache enabled,
- * Alignment checking disabled,
- * MMU translation disabled (for now). */
- ldr x0, =(HSCTLR_BASE)
+ ldr x0, =SCTLR_EL2_SET
msr SCTLR_EL2, x0
/* Ensure that any exceptions encountered at EL2
diff --git a/xen/include/asm-arm/processor.h b/xen/include/asm-arm/processor.h
index bbcba061ca..e9d2ae2715 100644
--- a/xen/include/asm-arm/processor.h
+++ b/xen/include/asm-arm/processor.h
@@ -127,6 +127,9 @@
#define SCTLR_A32_ELx_TE BIT(30, UL)
#define SCTLR_A32_ELx_FI BIT(21, UL)
+/* Common bits for SCTLR_ELx for Arm64 */
+#define SCTLR_A64_ELx_SA BIT(3, UL)
+
/* Common bits for SCTLR_ELx on all architectures */
#define SCTLR_Axx_ELx_EE BIT(25, UL)
#define SCTLR_Axx_ELx_WXN BIT(19, UL)
@@ -135,7 +138,58 @@
#define SCTLR_Axx_ELx_A BIT(1, UL)
#define SCTLR_Axx_ELx_M BIT(0, UL)
-#define HSCTLR_BASE _AC(0x30c51878,U)
+#ifdef CONFIG_ARM_32
+
+#define HSCTLR_RES1 (BIT( 3, UL) | BIT( 4, UL) | BIT( 5, UL) |\
+ BIT( 6, UL) | BIT(11, UL) | BIT(16, UL) |\
+ BIT(18, UL) | BIT(22, UL) | BIT(23, UL) |\
+ BIT(28, UL) | BIT(29, UL))
+
+#define HSCTLR_RES0 (BIT(7, UL) | BIT(8, UL) | BIT(9, UL) | BIT(10, UL)
|\
+ BIT(13, UL) | BIT(14, UL) | BIT(15, UL) | BIT(17, UL)
|\
+ BIT(20, UL) | BIT(24, UL) | BIT(26, UL) | BIT(27, UL)
|\
+ BIT(31, UL))
+
+/* Initial value for HSCTLR */
+#define HSCTLR_SET (HSCTLR_RES1 | SCTLR_Axx_ELx_A | SCTLR_Axx_ELx_I)
+
+/* Only used a pre-processing time... */
+#define HSCTLR_CLEAR (HSCTLR_RES0 | SCTLR_Axx_ELx_M |\
+ SCTLR_Axx_ELx_C | SCTLR_Axx_ELx_WXN |\
+ SCTLR_A32_ELx_FI | SCTLR_Axx_ELx_EE |\
+ SCTLR_A32_ELx_TE)
+
+#if (HSCTLR_SET ^ HSCTLR_CLEAR) != 0xffffffffU
+#error "Inconsistent HSCTLR set/clear bits"
+#endif
+
+#else
+
+#define SCTLR_EL2_RES1 (BIT( 4, UL) | BIT( 5, UL) | BIT(11, UL) |\
+ BIT(16, UL) | BIT(18, UL) | BIT(22, UL) |\
+ BIT(23, UL) | BIT(28, UL) | BIT(29, UL))
+
+#define SCTLR_EL2_RES0 (BIT( 6, UL) | BIT( 7, UL) | BIT( 8, UL) |\
+ BIT( 9, UL) | BIT(10, UL) | BIT(13, UL) |\
+ BIT(14, UL) | BIT(15, UL) | BIT(17, UL) |\
+ BIT(20, UL) | BIT(21, UL) | BIT(24, UL) |\
+ BIT(26, UL) | BIT(27, UL) | BIT(30, UL) |\
+ BIT(31, UL) | (0xffffffffULL << 32))
+
+/* Initial value for SCTLR_EL2 */
+#define SCTLR_EL2_SET (SCTLR_EL2_RES1 | SCTLR_A64_ELx_SA |\
+ SCTLR_Axx_ELx_I)
+
+/* Only used a pre-processing time... */
+#define SCTLR_EL2_CLEAR (SCTLR_EL2_RES0 | SCTLR_Axx_ELx_M |\
+ SCTLR_Axx_ELx_A | SCTLR_Axx_ELx_C |\
+ SCTLR_Axx_ELx_WXN | SCTLR_Axx_ELx_EE)
+
+#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffffUL
+#error "Inconsistent SCTLR_EL2 set/clear bits"
+#endif
+
+#endif
/* HCR Hyp Configuration Register */
#define HCR_RW (_AC(1,UL)<<31) /* Register Width, ARM64 only */
--
generated by git-patchbot for /home/xen/git/xen.git#master
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |