[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] xen/arm: optee: add OP-TEE header files
commit e2bc46ac70443226488ff91f2c21fd09fc83987e Author: Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx> AuthorDate: Tue Jun 11 18:46:22 2019 +0000 Commit: Julien Grall <julien.grall@xxxxxxx> CommitDate: Wed Jun 19 12:04:30 2019 +0100 xen/arm: optee: add OP-TEE header files This header files describes protocol between OP-TEE OS and OP-TEE clients, which are running in Normal World. This headers are needed for upcoming OP-TEE mediator, which is added in the next patch. Reason to add those headers in separate patch is to ease up review. Those files were taken from OP-TEE OS 3.5.0 tree and mangled a bit to compile with XEN. Location of the files in the original tree: core/include/optee_msg.h core/include/optee_rpc_cmd.h core/arch/arm/include/sm/optee_smc.h Note the imported header is licensed BSD-2-clause. This is fine as it is compatible with GPLv2-only. [OP-TEE commit id 5df2a985b2ffd0b6f1107f12ca2a88203bf31328] Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx> [julien: Add a sentence regarding the license] Acked-by: Julien Grall <julien.grall@xxxxxxx> --- xen/include/asm-arm/tee/optee_msg.h | 310 ++++++++++++++++++ xen/include/asm-arm/tee/optee_rpc_cmd.h | 318 ++++++++++++++++++ xen/include/asm-arm/tee/optee_smc.h | 564 ++++++++++++++++++++++++++++++++ 3 files changed, 1192 insertions(+) diff --git a/xen/include/asm-arm/tee/optee_msg.h b/xen/include/asm-arm/tee/optee_msg.h new file mode 100644 index 0000000000..fe743dbde3 --- /dev/null +++ b/xen/include/asm-arm/tee/optee_msg.h @@ -0,0 +1,310 @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * Copyright (c) 2015-2017, Linaro Limited + */ +#ifndef _OPTEE_MSG_H +#define _OPTEE_MSG_H + +#include <xen/bitops.h> +#include <xen/types.h> + +/* + * This file defines the OP-TEE message protocol used to communicate + * with an instance of OP-TEE running in secure world. + */ + +/***************************************************************************** + * Part 1 - formatting of messages + *****************************************************************************/ + +#define OPTEE_MSG_ATTR_TYPE_NONE 0x0 +#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT 0x1 +#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT 0x2 +#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT 0x3 +#define OPTEE_MSG_ATTR_TYPE_RMEM_INPUT 0x5 +#define OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT 0x6 +#define OPTEE_MSG_ATTR_TYPE_RMEM_INOUT 0x7 +#define OPTEE_MSG_ATTR_TYPE_TMEM_INPUT 0x9 +#define OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT 0xa +#define OPTEE_MSG_ATTR_TYPE_TMEM_INOUT 0xb + +#define OPTEE_MSG_ATTR_TYPE_MASK GENMASK(7, 0) + +/* + * Meta parameter to be absorbed by the Secure OS and not passed + * to the Trusted Application. + * + * Currently only used with OPTEE_MSG_CMD_OPEN_SESSION. + */ +#define OPTEE_MSG_ATTR_META BIT(8, UL) + +/* + * Pointer to a list of pages used to register user-defined SHM buffer. + * Used with OPTEE_MSG_ATTR_TYPE_TMEM_*. + * buf_ptr should point to the beginning of the buffer. Buffer will contain + * list of page addresses. OP-TEE core can reconstruct contiguous buffer from + * that page addresses list. Page addresses are stored as 64 bit values. + * Last entry on a page should point to the next page of buffer. + * Every entry in buffer should point to a 4k page beginning (12 least + * significant bits must be equal to zero). + * + * 12 least significant of optee_msg_param.u.tmem.buf_ptr should hold page + * offset of user buffer. + * + * So, entries should be placed like members of this structure: + * + * struct page_data { + * uint64_t pages_array[OPTEE_MSG_NONCONTIG_PAGE_SIZE/sizeof(uint64_t) - 1]; + * uint64_t next_page_data; + * }; + * + * Structure is designed to exactly fit into the page size + * OPTEE_MSG_NONCONTIG_PAGE_SIZE which is a standard 4KB page. + * + * The size of 4KB is chosen because this is the smallest page size for ARM + * architectures. If REE uses larger pages, it should divide them to 4KB ones. + */ +#define OPTEE_MSG_ATTR_NONCONTIG BIT(9, UL) + +/* + * Memory attributes for caching passed with temp memrefs. The actual value + * used is defined outside the message protocol with the exception of + * OPTEE_MSG_ATTR_CACHE_PREDEFINED which means the attributes already + * defined for the memory range should be used. If optee_smc.h is used as + * bearer of this protocol OPTEE_SMC_SHM_* is used for values. + */ +#define OPTEE_MSG_ATTR_CACHE_SHIFT 16 +#define OPTEE_MSG_ATTR_CACHE_MASK GENMASK(2, 0) +#define OPTEE_MSG_ATTR_CACHE_PREDEFINED 0 + +/* + * Same values as TEE_LOGIN_* from TEE Internal API + */ +#define OPTEE_MSG_LOGIN_PUBLIC 0x00000000 +#define OPTEE_MSG_LOGIN_USER 0x00000001 +#define OPTEE_MSG_LOGIN_GROUP 0x00000002 +#define OPTEE_MSG_LOGIN_APPLICATION 0x00000004 +#define OPTEE_MSG_LOGIN_APPLICATION_USER 0x00000005 +#define OPTEE_MSG_LOGIN_APPLICATION_GROUP 0x00000006 + +/* + * Page size used in non-contiguous buffer entries + */ +#define OPTEE_MSG_NONCONTIG_PAGE_SIZE 4096 + +#ifndef ASM +/** + * struct optee_msg_param_tmem - temporary memory reference parameter + * @buf_ptr: Address of the buffer + * @size: Size of the buffer + * @shm_ref: Temporary shared memory reference, pointer to a struct tee_shm + * + * Secure and normal world communicates pointers as physical address + * instead of the virtual address. This is because secure and normal world + * have completely independent memory mapping. Normal world can even have a + * hypervisor which need to translate the guest physical address (AKA IPA + * in ARM documentation) to a real physical address before passing the + * structure to secure world. + */ +struct optee_msg_param_tmem { + uint64_t buf_ptr; + uint64_t size; + uint64_t shm_ref; +}; + +/** + * struct optee_msg_param_rmem - registered memory reference parameter + * @offs: Offset into shared memory reference + * @size: Size of the buffer + * @shm_ref: Shared memory reference, pointer to a struct tee_shm + */ +struct optee_msg_param_rmem { + uint64_t offs; + uint64_t size; + uint64_t shm_ref; +}; + +/** + * struct optee_msg_param_value - values + * @a: first value + * @b: second value + * @c: third value + */ +struct optee_msg_param_value { + uint64_t a; + uint64_t b; + uint64_t c; +}; + +/** + * struct optee_msg_param - parameter + * @attr: attributes + * @memref: a memory reference + * @value: a value + * + * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in + * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value, + * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates tmem and + * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates rmem. + * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used. + */ +struct optee_msg_param { + uint64_t attr; + union { + struct optee_msg_param_tmem tmem; + struct optee_msg_param_rmem rmem; + struct optee_msg_param_value value; + } u; +}; + +/** + * struct optee_msg_arg - call argument + * @cmd: Command, one of OPTEE_MSG_CMD_* or OPTEE_MSG_RPC_CMD_* + * @func: Trusted Application function, specific to the Trusted Application, + * used if cmd == OPTEE_MSG_CMD_INVOKE_COMMAND + * @session: In parameter for all OPTEE_MSG_CMD_* except + * OPTEE_MSG_CMD_OPEN_SESSION where it's an output parameter instead + * @cancel_id: Cancellation id, a unique value to identify this request + * @ret: return value + * @ret_origin: origin of the return value + * @num_params: number of parameters supplied to the OS Command + * @params: the parameters supplied to the OS Command + * + * All normal calls to Trusted OS uses this struct. If cmd requires further + * information than what these fields hold it can be passed as a parameter + * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding + * attrs field). All parameters tagged as meta have to come first. + */ +struct optee_msg_arg { + uint32_t cmd; + uint32_t func; + uint32_t session; + uint32_t cancel_id; + uint32_t pad; + uint32_t ret; + uint32_t ret_origin; + uint32_t num_params; + + /* num_params tells the actual number of element in params */ + struct optee_msg_param params[]; +}; + +/** + * OPTEE_MSG_GET_ARG_SIZE - return size of struct optee_msg_arg + * + * @num_params: Number of parameters embedded in the struct optee_msg_arg + * + * Returns the size of the struct optee_msg_arg together with the number + * of embedded parameters. + */ +#define OPTEE_MSG_GET_ARG_SIZE(num_params) \ + (sizeof(struct optee_msg_arg) + \ + sizeof(struct optee_msg_param) * (num_params)) + +/* + * Defines the maximum value of @num_params that can be passed to + * OPTEE_MSG_GET_ARG_SIZE without a risk of crossing page boundary. + */ +#define OPTEE_MSG_MAX_NUM_PARAMS \ + ((OPTEE_MSG_NONCONTIG_PAGE_SIZE - sizeof(struct optee_msg_arg)) / \ + sizeof(struct optee_msg_param)) + +#endif /*ASM*/ + +/***************************************************************************** + * Part 2 - requests from normal world + *****************************************************************************/ + +/* + * Return the following UID if using API specified in this file without + * further extensions: + * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b. + * Represented in 4 32-bit words in OPTEE_MSG_UID_0, OPTEE_MSG_UID_1, + * OPTEE_MSG_UID_2, OPTEE_MSG_UID_3. + */ +#define OPTEE_MSG_UID_0 0x384fb3e0 +#define OPTEE_MSG_UID_1 0xe7f811e3 +#define OPTEE_MSG_UID_2 0xaf630002 +#define OPTEE_MSG_UID_3 0xa5d5c51b +#define OPTEE_MSG_FUNCID_CALLS_UID 0xFF01 + +/* + * Returns 2.0 if using API specified in this file without further + * extensions. Represented in 2 32-bit words in OPTEE_MSG_REVISION_MAJOR + * and OPTEE_MSG_REVISION_MINOR + */ +#define OPTEE_MSG_REVISION_MAJOR 2 +#define OPTEE_MSG_REVISION_MINOR 0 +#define OPTEE_MSG_FUNCID_CALLS_REVISION 0xFF03 + +/* + * Get UUID of Trusted OS. + * + * Used by non-secure world to figure out which Trusted OS is installed. + * Note that returned UUID is the UUID of the Trusted OS, not of the API. + * + * Returns UUID in 4 32-bit words in the same way as + * OPTEE_MSG_FUNCID_CALLS_UID described above. + */ +#define OPTEE_MSG_OS_OPTEE_UUID_0 0x486178e0 +#define OPTEE_MSG_OS_OPTEE_UUID_1 0xe7f811e3 +#define OPTEE_MSG_OS_OPTEE_UUID_2 0xbc5e0002 +#define OPTEE_MSG_OS_OPTEE_UUID_3 0xa5d5c51b +#define OPTEE_MSG_FUNCID_GET_OS_UUID 0x0000 + +/* + * Get revision of Trusted OS. + * + * Used by non-secure world to figure out which version of the Trusted OS + * is installed. Note that the returned revision is the revision of the + * Trusted OS, not of the API. + * + * Returns revision in 2 32-bit words in the same way as + * OPTEE_MSG_CALLS_REVISION described above. + */ +#define OPTEE_MSG_FUNCID_GET_OS_REVISION 0x0001 + +/* + * Do a secure call with struct optee_msg_arg as argument + * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd + * + * OPTEE_MSG_CMD_OPEN_SESSION opens a session to a Trusted Application. + * The first two parameters are tagged as meta, holding two value + * parameters to pass the following information: + * param[0].u.value.a-b uuid of Trusted Application + * param[1].u.value.a-b uuid of Client + * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_* + * + * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened + * session to a Trusted Application. struct optee_msg_arg::func is Trusted + * Application function, specific to the Trusted Application. + * + * OPTEE_MSG_CMD_CLOSE_SESSION closes a previously opened session to + * Trusted Application. + * + * OPTEE_MSG_CMD_CANCEL cancels a currently invoked command. + * + * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The + * information is passed as: + * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT + * [| OPTEE_MSG_ATTR_NONCONTIG] + * [in] param[0].u.tmem.buf_ptr physical address (of first fragment) + * [in] param[0].u.tmem.size size (of first fragment) + * [in] param[0].u.tmem.shm_ref holds shared memory reference + * + * OPTEE_MSG_CMD_UNREGISTER_SHM unregisteres a previously registered shared + * memory reference. The information is passed as: + * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_RMEM_INPUT + * [in] param[0].u.rmem.shm_ref holds shared memory reference + * [in] param[0].u.rmem.offs 0 + * [in] param[0].u.rmem.size 0 + */ +#define OPTEE_MSG_CMD_OPEN_SESSION 0 +#define OPTEE_MSG_CMD_INVOKE_COMMAND 1 +#define OPTEE_MSG_CMD_CLOSE_SESSION 2 +#define OPTEE_MSG_CMD_CANCEL 3 +#define OPTEE_MSG_CMD_REGISTER_SHM 4 +#define OPTEE_MSG_CMD_UNREGISTER_SHM 5 +#define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004 + +#endif /* _OPTEE_MSG_H */ diff --git a/xen/include/asm-arm/tee/optee_rpc_cmd.h b/xen/include/asm-arm/tee/optee_rpc_cmd.h new file mode 100644 index 0000000000..d6b9dfe30c --- /dev/null +++ b/xen/include/asm-arm/tee/optee_rpc_cmd.h @@ -0,0 +1,318 @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * Copyright (c) 2016-2017, Linaro Limited + */ + +#ifndef __OPTEE_RPC_CMD_H +#define __OPTEE_RPC_CMD_H + +/* + * All RPC is done with a struct optee_msg_arg as bearer of information, + * struct optee_msg_arg::arg holds values defined by OPTEE_RPC_CMD_* below. + * Only the commands handled by the kernel driver are defined here. + * + * RPC communication with tee-supplicant is reversed compared to normal + * client communication described above. The supplicant receives requests + * and sends responses. + */ + +/* + * Load a TA into memory + * + * Since the size of the TA isn't known in advance the size of the TA is + * can be queried with a NULL buffer. + * + * [in] value[0].a-b UUID + * [out] memref[1] Buffer with TA + */ +#define OPTEE_RPC_CMD_LOAD_TA 0 + +/* + * Replay Protected Memory Block access + * + * [in] memref[0] Frames to device + * [out] memref[1] Frames from device + */ +#define OPTEE_RPC_CMD_RPMB 1 + +/* + * File system access, see definition of protocol below + */ +#define OPTEE_RPC_CMD_FS 2 + +/* + * Get time + * + * Returns number of seconds and nano seconds since the Epoch, + * 1970-01-01 00:00:00 +0000 (UTC). + * + * [out] value[0].a Number of seconds + * [out] value[0].b Number of nano seconds. + */ +#define OPTEE_RPC_CMD_GET_TIME 3 + +/* + * Wait queue primitive, helper for secure world to implement a wait queue. + * + * If secure world needs to wait for a secure world mutex it issues a sleep + * request instead of spinning in secure world. Conversely is a wakeup + * request issued when a secure world mutex with a thread waiting thread is + * unlocked. + * + * Waiting on a key + * [in] value[0].a OPTEE_RPC_WAIT_QUEUE_SLEEP + * [in] value[0].b Wait key + * + * Waking up a key + * [in] value[0].a OPTEE_RPC_WAIT_QUEUE_WAKEUP + * [in] value[0].b Wakeup key + */ +#define OPTEE_RPC_CMD_WAIT_QUEUE 4 +#define OPTEE_RPC_WAIT_QUEUE_SLEEP 0 +#define OPTEE_RPC_WAIT_QUEUE_WAKEUP 1 + +/* + * Suspend execution + * + * [in] value[0].a Number of milliseconds to suspend + */ +#define OPTEE_RPC_CMD_SUSPEND 5 + +/* + * Allocate a piece of shared memory + * + * [in] value[0].a Type of memory one of + * OPTEE_RPC_SHM_TYPE_* below + * [in] value[0].b Requested size + * [in] value[0].c Required alignment + * [out] memref[0] Buffer + */ +#define OPTEE_RPC_CMD_SHM_ALLOC 6 +/* Memory that can be shared with a non-secure user space application */ +#define OPTEE_RPC_SHM_TYPE_APPL 0 +/* Memory only shared with non-secure kernel */ +#define OPTEE_RPC_SHM_TYPE_KERNEL 1 +/* + * Memory shared with non-secure kernel and exported to a non-secure user + * space application + */ +#define OPTEE_RPC_SHM_TYPE_GLOBAL 2 + +/* + * Free shared memory previously allocated with OPTEE_RPC_CMD_SHM_ALLOC + * + * [in] value[0].a Type of memory one of + * OPTEE_RPC_SHM_TYPE_* above + * [in] value[0].b Value of shared memory reference or cookie + */ +#define OPTEE_RPC_CMD_SHM_FREE 7 + +/* Was OPTEE_RPC_CMD_SQL_FS, which isn't supported any longer */ +#define OPTEE_RPC_CMD_SQL_FS_RESERVED 8 + +/* + * Send TA profiling information to normal world + * + * [in/out] value[0].a File identifier. Must be set to 0 on + * first call. A value >= 1 will be + * returned on success. Re-use this value + * to append data to the same file. + * [in] memref[1] TA UUID + * [in] memref[2] Profile data + */ +#define OPTEE_RPC_CMD_GPROF 9 + +/* + * Socket command, see definition of protocol below + */ +#define OPTEE_RPC_CMD_SOCKET 10 + +/* + * Register timestamp buffer in the linux kernel optee driver + * + * [in] value[0].a Subcommand (register buffer, unregister buffer) + * [in] value[0].b Physical address of timestamp buffer + * [in] value[0].c Size of buffer + */ +#define OPTEE_RPC_CMD_BENCH_REG 20 + +/* + * Definition of protocol for command OPTEE_RPC_CMD_FS + */ + +/* + * Open a file + * + * [in] value[0].a OPTEE_RPC_FS_OPEN + * [in] memref[1] A string holding the file name + * [out] value[2].a File descriptor of open file + */ +#define OPTEE_RPC_FS_OPEN 0 + +/* + * Create a file + * + * [in] value[0].a OPTEE_RPC_FS_CREATE + * [in] memref[1] A string holding the file name + * [out] value[2].a File descriptor of open file + */ +#define OPTEE_RPC_FS_CREATE 1 + +/* + * Close a file + * + * [in] value[0].a OPTEE_RPC_FS_CLOSE + * [in] value[0].b File descriptor of open file. + */ +#define OPTEE_RPC_FS_CLOSE 2 + +/* + * Read from a file + * + * [in] value[0].a OPTEE_RPC_FS_READ + * [in] value[0].b File descriptor of open file + * [in] value[0].c Offset into file + * [out] memref[1] Buffer to hold returned data + */ +#define OPTEE_RPC_FS_READ 3 + +/* + * Write to a file + * + * [in] value[0].a OPTEE_RPC_FS_WRITE + * [in] value[0].b File descriptor of open file + * [in] value[0].c Offset into file + * [in] memref[1] Buffer holding data to be written + */ +#define OPTEE_RPC_FS_WRITE 4 + +/* + * Truncate a file + * + * [in] value[0].a OPTEE_RPC_FS_TRUNCATE + * [in] value[0].b File descriptor of open file + * [in] value[0].c Length of file. + */ +#define OPTEE_RPC_FS_TRUNCATE 5 + +/* + * Remove a file + * + * [in] value[0].a OPTEE_RPC_FS_REMOVE + * [in] memref[1] A string holding the file name + */ +#define OPTEE_RPC_FS_REMOVE 6 + +/* + * Rename a file + * + * [in] value[0].a OPTEE_RPC_FS_RENAME + * [in] value[0].b True if existing target should be removed + * [in] memref[1] A string holding the old file name + * [in] memref[2] A string holding the new file name + */ +#define OPTEE_RPC_FS_RENAME 7 + +/* + * Opens a directory for file listing + * + * [in] value[0].a OPTEE_RPC_FS_OPENDIR + * [in] memref[1] A string holding the name of the directory + * [out] value[2].a Handle to open directory + */ +#define OPTEE_RPC_FS_OPENDIR 8 + +/* + * Closes a directory handle + * + * [in] value[0].a OPTEE_RPC_FS_CLOSEDIR + * [in] value[0].b Handle to open directory + */ +#define OPTEE_RPC_FS_CLOSEDIR 9 + +/* + * Read next file name of directory + * + * + * [in] value[0].a OPTEE_RPC_FS_READDIR + * [in] value[0].b Handle to open directory + * [out] memref[1] A string holding the file name + */ +#define OPTEE_RPC_FS_READDIR 10 + +/* End of definition of protocol for command OPTEE_RPC_CMD_FS */ + +/* + * Definition of protocol for command OPTEE_RPC_CMD_SOCKET + */ + +#define OPTEE_RPC_SOCKET_TIMEOUT_NONBLOCKING 0 +#define OPTEE_RPC_SOCKET_TIMEOUT_BLOCKING 0xffffffff + +/* + * Open socket + * + * [in] value[0].a OPTEE_RPC_SOCKET_OPEN + * [in] value[0].b TA instance id + * [in] value[1].a Server port number + * [in] value[1].b Protocol, TEE_ISOCKET_PROTOCOLID_* + * [in] value[1].c Ip version TEE_IP_VERSION_* from tee_ipsocket.h + * [in] memref[2] Server address + * [out] value[3].a Socket handle (32-bit) + */ +#define OPTEE_RPC_SOCKET_OPEN 0 + +/* + * Close socket + * + * [in] value[0].a OPTEE_RPC_SOCKET_CLOSE + * [in] value[0].b TA instance id + * [in] value[0].c Socket handle + */ +#define OPTEE_RPC_SOCKET_CLOSE 1 + +/* + * Close all sockets + * + * [in] value[0].a OPTEE_RPC_SOCKET_CLOSE_ALL + * [in] value[0].b TA instance id + */ +#define OPTEE_RPC_SOCKET_CLOSE_ALL 2 + +/* + * Send data on socket + * + * [in] value[0].a OPTEE_RPC_SOCKET_SEND + * [in] value[0].b TA instance id + * [in] value[0].c Socket handle + * [in] memref[1] Buffer to transmit + * [in] value[2].a Timeout ms or OPTEE_RPC_SOCKET_TIMEOUT_* + * [out] value[2].b Number of transmitted bytes + */ +#define OPTEE_RPC_SOCKET_SEND 3 + +/* + * Receive data on socket + * + * [in] value[0].a OPTEE_RPC_SOCKET_RECV + * [in] value[0].b TA instance id + * [in] value[0].c Socket handle + * [out] memref[1] Buffer to receive + * [in] value[2].a Timeout ms or OPTEE_RPC_SOCKET_TIMEOUT_* + */ +#define OPTEE_RPC_SOCKET_RECV 4 + +/* + * Perform IOCTL on socket + * + * [in] value[0].a OPTEE_RPC_SOCKET_IOCTL + * [in] value[0].b TA instance id + * [in] value[0].c Socket handle + * [in/out] memref[1] Buffer + * [in] value[2].a Ioctl command + */ +#define OPTEE_RPC_SOCKET_IOCTL 5 + +/* End of definition of protocol for command OPTEE_RPC_CMD_SOCKET */ + +#endif /*__OPTEE_RPC_CMD_H*/ diff --git a/xen/include/asm-arm/tee/optee_smc.h b/xen/include/asm-arm/tee/optee_smc.h new file mode 100644 index 0000000000..d568bb2fe1 --- /dev/null +++ b/xen/include/asm-arm/tee/optee_smc.h @@ -0,0 +1,564 @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * Copyright (c) 2015, Linaro Limited + */ +#ifndef OPTEE_SMC_H +#define OPTEE_SMC_H + +/* + * This file is exported by OP-TEE and is in kept in sync between secure + * world and normal world kernel driver. We're following ARM SMC Calling + * Convention as specified in + * http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html + * + * This file depends on optee_msg.h being included to expand the SMC id + * macros below. + */ + + +#define OPTEE_SMC_STD_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_CONV_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS, (func_num)) +#define OPTEE_SMC_FAST_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS, (func_num)) + +/* + * Function specified by SMC Calling convention. + */ +#define OPTEE_SMC_FUNCID_CALLS_COUNT 0xFF00 +#define OPTEE_SMC_CALLS_COUNT \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS_END, \ + OPTEE_SMC_FUNCID_CALLS_COUNT) + +/* + * Normal cached memory (write-back), shareable for SMP systems and not + * shareable for UP systems. + */ +#define OPTEE_SMC_SHM_CACHED 1 + +/* + * a0..a7 is used as register names in the descriptions below, on arm32 + * that translates to r0..r7 and on arm64 to w0..w7. In both cases it's + * 32-bit registers. + */ + +/* + * Function specified by SMC Calling convention + * + * Return the following UID if using API specified in this file + * without further extensions: + * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b. + * see also OPTEE_MSG_UID_* in optee_msg.h + */ +#define OPTEE_SMC_FUNCID_CALLS_UID OPTEE_MSG_FUNCID_CALLS_UID +#define OPTEE_SMC_CALLS_UID \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS_END, \ + OPTEE_SMC_FUNCID_CALLS_UID) + +/* + * Function specified by SMC Calling convention + * + * Returns 2.0 if using API specified in this file without further extensions. + * see also OPTEE_MSG_REVISION_* in optee_msg.h + */ +#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEE_MSG_FUNCID_CALLS_REVISION +#define OPTEE_SMC_CALLS_REVISION \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS_END, \ + OPTEE_SMC_FUNCID_CALLS_REVISION) + +/* + * Get UUID of Trusted OS. + * + * Used by non-secure world to figure out which Trusted OS is installed. + * Note that returned UUID is the UUID of the Trusted OS, not of the API. + * + * Returns UUID in a0-4 in the same way as OPTEE_SMC_CALLS_UID + * described above. + */ +#define OPTEE_SMC_FUNCID_GET_OS_UUID OPTEE_MSG_FUNCID_GET_OS_UUID +#define OPTEE_SMC_CALL_GET_OS_UUID \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_UUID) + +/* + * Get revision of Trusted OS. + * + * Used by non-secure world to figure out which version of the Trusted OS + * is installed. Note that the returned revision is the revision of the + * Trusted OS, not of the API. + * + * Returns revision in a0-1 in the same way as OPTEE_SMC_CALLS_REVISION + * described above. May optionally return a 32-bit build identifier in a2, + * with zero meaning unspecified. + */ +#define OPTEE_SMC_FUNCID_GET_OS_REVISION OPTEE_MSG_FUNCID_GET_OS_REVISION +#define OPTEE_SMC_CALL_GET_OS_REVISION \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_REVISION) + +/* + * Call with struct optee_msg_arg as argument + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC*CALL_WITH_ARG + * a1 Upper 32 bits of a 64-bit physical pointer to a struct optee_msg_arg + * a2 Lower 32 bits of a 64-bit physical pointer to a struct optee_msg_arg + * a3 Cache settings, not used if physical pointer is in a predefined shared + * memory area else per OPTEE_SMC_SHM_* + * a4-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 Return value, OPTEE_SMC_RETURN_* + * a1-3 Not used + * a4-7 Preserved + * + * OPTEE_SMC_RETURN_ETHREAD_LIMIT return register usage: + * a0 Return value, OPTEE_SMC_RETURN_ETHREAD_LIMIT + * a1-3 Preserved + * a4-7 Preserved + * + * RPC return register usage: + * a0 Return value, OPTEE_SMC_RETURN_IS_RPC(val) + * a1-2 RPC parameters + * a3-7 Resume information, must be preserved + * + * Possible return values: + * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this + * function. + * OPTEE_SMC_RETURN_OK Call completed, result updated in + * the previously supplied struct + * optee_msg_arg. + * OPTEE_SMC_RETURN_ETHREAD_LIMIT Number of Trusted OS threads exceeded, + * try again later. + * OPTEE_SMC_RETURN_EBADADDR Bad physical pointer to struct + * optee_msg_arg. + * OPTEE_SMC_RETURN_EBADCMD Bad/unknown cmd in struct optee_msg_arg + * OPTEE_SMC_RETURN_IS_RPC() Call suspended by RPC call to normal + * world. + */ +#define OPTEE_SMC_FUNCID_CALL_WITH_ARG OPTEE_MSG_FUNCID_CALL_WITH_ARG +#define OPTEE_SMC_CALL_WITH_ARG \ + OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG) + +/* + * Get Shared Memory Config + * + * Returns the Secure/Non-secure shared memory config. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_GET_SHM_CONFIG + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Have config return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Physical address of start of SHM + * a2 Size of of SHM + * a3 Cache settings of memory, as defined by the + * OPTEE_SMC_SHM_* values above + * a4-7 Preserved + * + * Not available register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL + * a1-3 Not used + * a4-7 Preserved + */ +#define OPTEE_SMC_FUNCID_GET_SHM_CONFIG 7 +#define OPTEE_SMC_GET_SHM_CONFIG \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SHM_CONFIG) + +/* + * Configures L2CC mutex + * + * Disables, enables usage of L2CC mutex. Returns or sets physical address + * of L2CC mutex. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_L2CC_MUTEX + * a1 OPTEE_SMC_L2CC_MUTEX_GET_ADDR Get physical address of mutex + * OPTEE_SMC_L2CC_MUTEX_SET_ADDR Set physical address of mutex + * OPTEE_SMC_L2CC_MUTEX_ENABLE Enable usage of mutex + * OPTEE_SMC_L2CC_MUTEX_DISABLE Disable usage of mutex + * a2 if a1 == OPTEE_SMC_L2CC_MUTEX_SET_ADDR, upper 32bit of a 64bit + * physical address of mutex + * a3 if a1 == OPTEE_SMC_L2CC_MUTEX_SET_ADDR, lower 32bit of a 64bit + * physical address of mutex + * a3-6 Not used + * a7 Hypervisor Client ID register + * + * Have config return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Preserved + * a2 if a1 == OPTEE_SMC_L2CC_MUTEX_GET_ADDR, upper 32bit of a 64bit + * physical address of mutex + * a3 if a1 == OPTEE_SMC_L2CC_MUTEX_GET_ADDR, lower 32bit of a 64bit + * physical address of mutex + * a3-7 Preserved + * + * Error return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL Physical address not available + * OPTEE_SMC_RETURN_EBADADDR Bad supplied physical address + * OPTEE_SMC_RETURN_EBADCMD Unsupported value in a1 + * a1-7 Preserved + */ +#define OPTEE_SMC_L2CC_MUTEX_GET_ADDR 0 +#define OPTEE_SMC_L2CC_MUTEX_SET_ADDR 1 +#define OPTEE_SMC_L2CC_MUTEX_ENABLE 2 +#define OPTEE_SMC_L2CC_MUTEX_DISABLE 3 +#define OPTEE_SMC_FUNCID_L2CC_MUTEX 8 +#define OPTEE_SMC_L2CC_MUTEX \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_L2CC_MUTEX) + +/* + * Exchanges capabilities between normal world and secure world + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_EXCHANGE_CAPABILITIES + * a1 bitfield of normal world capabilities OPTEE_SMC_NSEC_CAP_* + * a2-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_* + * a2-7 Preserved + * + * Error return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL, can't use the capabilities from normal world + * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_* + * a2-7 Preserved + */ +/* Normal world works as a uniprocessor system */ +#define OPTEE_SMC_NSEC_CAP_UNIPROCESSOR (1 << 0) +/* Secure world has reserved shared memory for normal world to use */ +#define OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM (1 << 0) +/* Secure world can communicate via previously unregistered shared memory */ +#define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM (1 << 1) + +/* + * Secure world supports commands "register/unregister shared memory", + * secure world accepts command buffers located in any parts of non-secure RAM + */ +#define OPTEE_SMC_SEC_CAP_DYNAMIC_SHM (1 << 2) + +#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9 +#define OPTEE_SMC_EXCHANGE_CAPABILITIES \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES) + +/* + * Disable and empties cache of shared memory objects + * + * Secure world can cache frequently used shared memory objects, for + * example objects used as RPC arguments. When secure world is idle this + * function returns one shared memory reference to free. To disable the + * cache and free all cached objects this function has to be called until + * it returns OPTEE_SMC_RETURN_ENOTAVAIL. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_DISABLE_SHM_CACHE + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Upper 32 bits of a 64-bit Shared memory cookie + * a2 Lower 32 bits of a 64-bit Shared memory cookie + * a3-7 Preserved + * + * Cache empty return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL + * a1-7 Preserved + * + * Not idle return register usage: + * a0 OPTEE_SMC_RETURN_EBUSY + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE 10 +#define OPTEE_SMC_DISABLE_SHM_CACHE \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE) + +/* + * Enable cache of shared memory objects + * + * Secure world can cache frequently used shared memory objects, for + * example objects used as RPC arguments. When secure world is idle this + * function returns OPTEE_SMC_RETURN_OK and the cache is enabled. If + * secure world isn't idle OPTEE_SMC_RETURN_EBUSY is returned. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_ENABLE_SHM_CACHE + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1-7 Preserved + * + * Not idle return register usage: + * a0 OPTEE_SMC_RETURN_EBUSY + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE 11 +#define OPTEE_SMC_ENABLE_SHM_CACHE \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE) + +/* + * Release of secondary cores + * + * OP-TEE in secure world is in charge of the release process of secondary + * cores. The Rich OS issue the this request to ask OP-TEE to boot up the + * secondary cores, go through the OP-TEE per-core initialization, and then + * switch to the Non-seCure world with the Rich OS provided entry address. + * The secondary cores enter Non-Secure world in SVC mode, with Thumb, FIQ, + * IRQ and Abort bits disabled. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_BOOT_SECONDARY + * a1 Index of secondary core to boot + * a2 Upper 32 bits of a 64-bit Non-Secure world entry physical address + * a3 Lower 32 bits of a 64-bit Non-Secure world entry physical address + * a4-7 Not used + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1-7 Preserved + * + * Error return: + * a0 OPTEE_SMC_RETURN_EBADCMD Core index out of range + * a1-7 Preserved + * + * Not idle return register usage: + * a0 OPTEE_SMC_RETURN_EBUSY + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_BOOT_SECONDARY 12 +#define OPTEE_SMC_BOOT_SECONDARY \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_BOOT_SECONDARY) + +/* + * Inform OP-TEE about a new virtual machine + * + * Hypervisor issues this call during virtual machine (guest) creation. + * OP-TEE records client id of new virtual machine and prepares + * to receive requests from it. This call is available only if OP-TEE + * was built with virtualization support. + * + * Call requests usage: + * a0 SMC Function ID, OPTEE_SMC_VM_CREATED + * a1 Hypervisor Client ID of newly created virtual machine + * a2-6 Not used + * a7 Hypervisor Client ID register. Must be 0, because only hypervisor + * can issue this call + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1-7 Preserved + * + * Error return: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL OP-TEE have no resources for + * another VM + * a1-7 Preserved + * + */ +#define OPTEE_SMC_FUNCID_VM_CREATED 13 +#define OPTEE_SMC_VM_CREATED \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_VM_CREATED) + +/* + * Inform OP-TEE about shutdown of a virtual machine + * + * Hypervisor issues this call during virtual machine (guest) destruction. + * OP-TEE will clean up all resources associated with this VM. This call is + * available only if OP-TEE was built with virtualization support. + * + * Call requests usage: + * a0 SMC Function ID, OPTEE_SMC_VM_DESTROYED + * a1 Hypervisor Client ID of virtual machine being shut down + * a2-6 Not used + * a7 Hypervisor Client ID register. Must be 0, because only hypervisor + * can issue this call + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1-7 Preserved + * + */ +#define OPTEE_SMC_FUNCID_VM_DESTROYED 14 +#define OPTEE_SMC_VM_DESTROYED \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_VM_DESTROYED) + +/* + * Query OP-TEE about number of supported threads + * + * Normal World OS or Hypervisor issues this call to find out how many + * threads OP-TEE supports. That is how many standard calls can be issued + * in parallel before OP-TEE will return OPTEE_SMC_RETURN_ETHREAD_LIMIT. + * + * Call requests usage: + * a0 SMC Function ID, OPTEE_SMC_GET_THREAD_COUNT + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Number of threads + * a2-7 Preserved + * + * Error return: + * a0 OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Requested call is not implemented + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_GET_THREAD_COUNT 15 +#define OPTEE_SMC_GET_THREAD_COUNT \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_THREAD_COUNT) + +/* + * Resume from RPC (for example after processing a foreign interrupt) + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC + * a1-3 Value of a1-3 when OPTEE_SMC_CALL_WITH_ARG returned + * OPTEE_SMC_RETURN_RPC in a0 + * + * Return register usage is the same as for OPTEE_SMC_*CALL_WITH_ARG above. + * + * Possible return values + * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this + * function. + * OPTEE_SMC_RETURN_OK Original call completed, result + * updated in the previously supplied. + * struct optee_msg_arg + * OPTEE_SMC_RETURN_RPC Call suspended by RPC call to normal + * world. + * OPTEE_SMC_RETURN_ERESUME Resume failed, the opaque resume + * information was corrupt. + */ +#define OPTEE_SMC_FUNCID_RETURN_FROM_RPC 3 +#define OPTEE_SMC_CALL_RETURN_FROM_RPC \ + OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_RETURN_FROM_RPC) + +#define OPTEE_SMC_RETURN_RPC_PREFIX_MASK 0xFFFF0000 +#define OPTEE_SMC_RETURN_RPC_PREFIX 0xFFFF0000 +#define OPTEE_SMC_RETURN_RPC_FUNC_MASK 0x0000FFFF + +#define OPTEE_SMC_RETURN_GET_RPC_FUNC(ret) \ + ((ret) & OPTEE_SMC_RETURN_RPC_FUNC_MASK) + +#define OPTEE_SMC_RPC_VAL(func) ((func) | OPTEE_SMC_RETURN_RPC_PREFIX) + +/* + * Allocate memory for RPC parameter passing. The memory is used to hold a + * struct optee_msg_arg. + * + * "Call" register usage: + * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC + * a1 Size in bytes of required argument memory + * a2 Not used + * a3 Resume information, must be preserved + * a4-5 Not used + * a6-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1 Upper 32 bits of 64-bit physical pointer to allocated + * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't + * be allocated. + * a2 Lower 32 bits of 64-bit physical pointer to allocated + * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't + * be allocated + * a3 Preserved + * a4 Upper 32 bits of 64-bit Shared memory cookie used when freeing + * the memory or doing an RPC + * a5 Lower 32 bits of 64-bit Shared memory cookie used when freeing + * the memory or doing an RPC + * a6-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_ALLOC 0 +#define OPTEE_SMC_RETURN_RPC_ALLOC \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC) + +/* + * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC + * + * "Call" register usage: + * a0 This value, OPTEE_SMC_RETURN_RPC_FREE + * a1 Upper 32 bits of 64-bit shared memory cookie belonging to this + * argument memory + * a2 Lower 32 bits of 64-bit shared memory cookie belonging to this + * argument memory + * a3-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1-2 Not used + * a3-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_FREE 2 +#define OPTEE_SMC_RETURN_RPC_FREE \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE) + +/* + * Deliver a foreign interrupt in normal world. + * + * "Call" register usage: + * a0 OPTEE_SMC_RETURN_RPC_FOREIGN_INTR + * a1-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_FOREIGN_INTR 4 +#define OPTEE_SMC_RETURN_RPC_FOREIGN_INTR \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FOREIGN_INTR) + +/* + * Do an RPC request. The supplied struct optee_msg_arg tells which + * request to do and the parameters for the request. The following fields + * are used (the rest are unused): + * - cmd the Request ID + * - ret return value of the request, filled in by normal world + * - num_params number of parameters for the request + * - params the parameters + * - param_attrs attributes of the parameters + * + * "Call" register usage: + * a0 OPTEE_SMC_RETURN_RPC_CMD + * a1 Upper 32 bits of a 64-bit Shared memory cookie holding a + * struct optee_msg_arg, must be preserved, only the data should + * be updated + * a2 Lower 32 bits of a 64-bit Shared memory cookie holding a + * struct optee_msg_arg, must be preserved, only the data should + * be updated + * a3-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1-2 Not used + * a3-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_CMD 5 +#define OPTEE_SMC_RETURN_RPC_CMD \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_CMD) + +/* Returned in a0 */ +#define OPTEE_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF + +/* Returned in a0 only from Trusted OS functions */ +#define OPTEE_SMC_RETURN_OK 0x0 +#define OPTEE_SMC_RETURN_ETHREAD_LIMIT 0x1 +#define OPTEE_SMC_RETURN_EBUSY 0x2 +#define OPTEE_SMC_RETURN_ERESUME 0x3 +#define OPTEE_SMC_RETURN_EBADADDR 0x4 +#define OPTEE_SMC_RETURN_EBADCMD 0x5 +#define OPTEE_SMC_RETURN_ENOMEM 0x6 +#define OPTEE_SMC_RETURN_ENOTAVAIL 0x7 +#define OPTEE_SMC_RETURN_IS_RPC(ret) \ + (((ret) != OPTEE_SMC_RETURN_UNKNOWN_FUNCTION) && \ + ((((ret) & OPTEE_SMC_RETURN_RPC_PREFIX_MASK) == \ + OPTEE_SMC_RETURN_RPC_PREFIX))) + +#endif /* OPTEE_SMC_H */ -- generated by git-patchbot for /home/xen/git/xen.git#master _______________________________________________ Xen-changelog mailing list Xen-changelog@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/xen-changelog
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |