[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-changelog] [xen staging] xen/arm: Restrict "p2m_ipa_bits" according to the IOMMU requirements



commit fab256ba5feee451a07c6cb4fe3ec12d2d7a5b41
Author:     Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
AuthorDate: Fri Sep 27 14:57:54 2019 +0300
Commit:     Julien Grall <julien.grall@xxxxxxx>
CommitDate: Fri Sep 27 13:36:44 2019 +0100

    xen/arm: Restrict "p2m_ipa_bits" according to the IOMMU requirements
    
    There is a strict requirement for the IOMMU which wants to share
    the P2M table with the CPU. The IOMMU's Stage-2 input size must be equal
    to the P2M IPA size. It is not a problem when the IOMMU can support
    all values the CPU supports. In that case, the IOMMU driver would just
    use any "p2m_ipa_bits" value as is. But, there are cases when not.
    
    In order to make P2M sharing possible on the platforms which
    IOMMUs have a limitation in maximum Stage-2 input size introduce
    the following logic.
    
    First initialize the IOMMU subsystem and gather requirements regarding
    the maximum IPA bits supported by each IOMMU device to figure out
    the minimum value among them. In the P2M code, take into the account
    the IOMMU requirements and choose suitable "pa_range" according
    to the restricted "p2m_ipa_bits".
    
    Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
    Reviewed-by: Julien Grall <julien.grall@xxxxxxx>
---
 xen/arch/arm/p2m.c                       | 41 ++++++++++++++++++++++++++++----
 xen/arch/arm/setup.c                     |  9 +++++--
 xen/drivers/passthrough/arm/ipmmu-vmsa.c | 18 ++------------
 xen/drivers/passthrough/arm/smmu.c       | 17 +++++++------
 xen/include/asm-arm/p2m.h                |  9 +++++++
 5 files changed, 63 insertions(+), 31 deletions(-)

diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
index 692565757e..5ff6ce15f6 100644
--- a/xen/arch/arm/p2m.c
+++ b/xen/arch/arm/p2m.c
@@ -34,7 +34,11 @@ static unsigned int __read_mostly max_vmid = MAX_VMID_8_BIT;
 
 #define P2M_ROOT_PAGES    (1<<P2M_ROOT_ORDER)
 
-unsigned int __read_mostly p2m_ipa_bits;
+/*
+ * Set larger than any possible value, so the number of IPA bits can be
+ * restricted by external entity (e.g. IOMMU).
+ */
+unsigned int __read_mostly p2m_ipa_bits = 64;
 
 /* Helpers to lookup the properties of each level */
 static const paddr_t level_masks[] =
@@ -1927,6 +1931,16 @@ struct page_info *get_page_from_gva(struct vcpu *v, 
vaddr_t va,
     return page;
 }
 
+void __init p2m_restrict_ipa_bits(unsigned int ipa_bits)
+{
+    /*
+     * Calculate the minimum of the maximum IPA bits that any external entity
+     * can support.
+     */
+    if ( ipa_bits < p2m_ipa_bits )
+        p2m_ipa_bits = ipa_bits;
+}
+
 /* VTCR value to be configured by all CPUs. Set only once by the boot CPU */
 static uint32_t __read_mostly vtcr;
 
@@ -1958,6 +1972,10 @@ void __init setup_virt_paging(void)
     unsigned long val = VTCR_RES1|VTCR_SH0_IS|VTCR_ORGN0_WBWA|VTCR_IRGN0_WBWA;
 
 #ifdef CONFIG_ARM_32
+    if ( p2m_ipa_bits < 40 )
+        panic("P2M: Not able to support %u-bit IPA at the moment\n",
+              p2m_ipa_bits);
+
     printk("P2M: 40-bit IPA\n");
     p2m_ipa_bits = 40;
     val |= VTCR_T0SZ(0x18); /* 40 bit IPA */
@@ -1981,15 +1999,20 @@ void __init setup_virt_paging(void)
         [7] = { 0 }  /* Invalid */
     };
 
-    unsigned int cpu;
+    unsigned int i, cpu;
     unsigned int pa_range = 0x10; /* Larger than any possible value */
     bool vmid_8_bit = false;
 
     for_each_online_cpu ( cpu )
     {
         const struct cpuinfo_arm *info = &cpu_data[cpu];
-        if ( info->mm64.pa_range < pa_range )
-            pa_range = info->mm64.pa_range;
+
+        /*
+         * Restrict "p2m_ipa_bits" if needed. As P2M table is always configured
+         * with IPA bits == PA bits, compare against "pabits".
+         */
+        if ( pa_range_info[info->mm64.pa_range].pabits < p2m_ipa_bits )
+            p2m_ipa_bits = pa_range_info[info->mm64.pa_range].pabits;
 
         /* Set a flag if the current cpu does not support 16 bit VMIDs. */
         if ( info->mm64.vmid_bits != MM64_VMID_16_BITS_SUPPORT )
@@ -2003,6 +2026,16 @@ void __init setup_virt_paging(void)
     if ( !vmid_8_bit )
         max_vmid = MAX_VMID_16_BIT;
 
+    /* Choose suitable "pa_range" according to the resulted "p2m_ipa_bits". */
+    for ( i = 0; i < ARRAY_SIZE(pa_range_info); i++ )
+    {
+        if ( p2m_ipa_bits == pa_range_info[i].pabits )
+        {
+            pa_range = i;
+            break;
+        }
+    }
+
     /* pa_range is 4 bits, but the defined encodings are only 3 bits */
     if ( pa_range >= ARRAY_SIZE(pa_range_info) || 
!pa_range_info[pa_range].pabits )
         panic("Unknown encoding of ID_AA64MMFR0_EL1.PARange %x\n", pa_range);
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index fca7e68cba..790eab94d6 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -928,12 +928,17 @@ void __init start_xen(unsigned long boot_phys_offset,
     printk("Brought up %ld CPUs\n", (long)num_online_cpus());
     /* TODO: smp_cpus_done(); */
 
-    setup_virt_paging();
-
+    /*
+     * The IOMMU subsystem must be initialized before P2M as we need
+     * to gather requirements regarding the maximum IPA bits supported by
+     * each IOMMU device.
+     */
     rc = iommu_setup();
     if ( !iommu_enabled && rc != -ENODEV )
         panic("Couldn't configure correctly all the IOMMUs.\n");
 
+    setup_virt_paging();
+
     do_initcalls();
 
     /*
diff --git a/xen/drivers/passthrough/arm/ipmmu-vmsa.c 
b/xen/drivers/passthrough/arm/ipmmu-vmsa.c
index f2fb4a2378..9cfae7e74e 100644
--- a/xen/drivers/passthrough/arm/ipmmu-vmsa.c
+++ b/xen/drivers/passthrough/arm/ipmmu-vmsa.c
@@ -844,22 +844,8 @@ static int ipmmu_probe(struct dt_device_node *node)
             goto out;
         }
 
-        /*
-         * As 4-level translation table is not supported in IPMMU, we need
-         * to check IPA size used for P2M table beforehand to be sure it is
-         * 3-level and the IPMMU will be able to use it.
-         *
-         * TODO: First initialize the IOMMU and gather the requirements and
-         * then initialize the P2M. In the P2M code, take into the account
-         * the IOMMU requirements and restrict "pa_range" if necessary.
-         */
-        if ( IPMMU_MAX_P2M_IPA_BITS < p2m_ipa_bits )
-        {
-            printk(XENLOG_ERR "ipmmu: P2M IPA size is not supported (P2M=%u 
IPMMU=%u)!\n",
-                   p2m_ipa_bits, IPMMU_MAX_P2M_IPA_BITS);
-            ret = -ENODEV;
-            goto out;
-        }
+        /* Set maximum Stage-2 input size supported by the IPMMU. */
+        p2m_restrict_ipa_bits(IPMMU_MAX_P2M_IPA_BITS);
 
         irq = platform_get_irq(node, 0);
         if ( irq < 0 )
diff --git a/xen/drivers/passthrough/arm/smmu.c 
b/xen/drivers/passthrough/arm/smmu.c
index 8ae986a18d..94662a8501 100644
--- a/xen/drivers/passthrough/arm/smmu.c
+++ b/xen/drivers/passthrough/arm/smmu.c
@@ -1110,7 +1110,11 @@ static void arm_smmu_init_context_bank(struct 
arm_smmu_domain *smmu_domain)
                        reg = TTBCR_TG0_64K;
 
                if (!stage1) {
-                       reg |= (64 - smmu->s2_input_size) << TTBCR_T0SZ_SHIFT;
+                       /*
+                        * Xen: The IOMMU share the page-tables with the P2M
+                        * which may have restrict the size further.
+                        */
+                       reg |= (64 - p2m_ipa_bits) << TTBCR_T0SZ_SHIFT;
 
                        switch (smmu->s2_output_size) {
                        case 32:
@@ -2198,14 +2202,9 @@ static int arm_smmu_device_cfg_probe(struct 
arm_smmu_device *smmu)
        size = arm_smmu_id_size_to_bits((id >> ID2_IAS_SHIFT) & ID2_IAS_MASK);
        smmu->s1_output_size = min_t(unsigned long, PHYS_MASK_SHIFT, size);
 
-       /* Xen: Stage-2 input size has to match p2m_ipa_bits.  */
-       if (size < p2m_ipa_bits) {
-               dev_err(smmu->dev,
-                       "P2M IPA size not supported (P2M=%u SMMU=%lu)!\n",
-                       p2m_ipa_bits, size);
-               return -ENODEV;
-       }
-       smmu->s2_input_size = p2m_ipa_bits;
+       /* Xen: Set maximum Stage-2 input size supported by the SMMU. */
+       p2m_restrict_ipa_bits(size);
+       smmu->s2_input_size = size;
 #if 0
        /* Stage-2 input size limited due to pgd allocation (PTRS_PER_PGD) */
 #ifdef CONFIG_64BIT
diff --git a/xen/include/asm-arm/p2m.h b/xen/include/asm-arm/p2m.h
index 03f2ee75c1..89f82df380 100644
--- a/xen/include/asm-arm/p2m.h
+++ b/xen/include/asm-arm/p2m.h
@@ -159,6 +159,15 @@ void p2m_altp2m_check(struct vcpu *v, uint16_t idx)
     /* Not supported on ARM. */
 }
 
+/*
+ * Helper to restrict "p2m_ipa_bits" according the external entity
+ * (e.g. IOMMU) requirements.
+ *
+ * Each corresponding driver should report the maximum IPA bits
+ * (Stage-2 input size) it can support.
+ */
+void p2m_restrict_ipa_bits(unsigned int ipa_bits);
+
 /* Second stage paging setup, to be called on all CPUs */
 void setup_virt_paging(void);
 
--
generated by git-patchbot for /home/xen/git/xen.git#staging

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.