|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging] libxl: Move shadow_memkb and iommu_memkb defaulting into libxl
commit 67c82f437ed169258f89de2d925894f923c179cf
Author: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
AuthorDate: Fri Oct 4 11:45:59 2019 +0100
Commit: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
CommitDate: Thu Oct 24 16:08:41 2019 +0100
libxl: Move shadow_memkb and iommu_memkb defaulting into libxl
Defaulting is supposed to be done by libxl. So these calculations
should be here in libxl. libxl__domain_config_setdefault has all the
necessary information including the values of max_memkb and max_vcpus.
The overall functional effect depends on the caller:
For xl, no change. The code moves from xl to libxl.
For callers who set one or both shadow_memkb and iommu_memkb (whether
from libxl_get_required_shadow_memory or otherwise) before calling
libxl_domain_need_memory (any version): the new code will leave their
setting(s) unchanged.
For callers who do not call libxl_domain_need_memory at all, and who
fail to set one of these memory values: now they are both are properly
set. The shadow and iommu memory to be properly accounted for as
intended.
For callers which call libxl_domain_need_memory and request the
current API (4.13) or which track libxl, the default values are also
now right and everything works as intended.
For callers which call libxl_domain_need_memory, and request an old
pre-4.13 libxl API, and which leave one of these memkb settings unset,
we take special measures to preserve the old behaviour.
This means that they don't get the additional iommu memory and are at
risk of the domain running out of memory as a result of f89f555827a6
"remove late (on-demand) construction of IOMMU page tables". But this
is no worse than the state just after f89f555827a6, which already
broke such callers in that way. This is perhaps justifiable because
of the API stability warning next to libxl_domain_need_memory.
An alternative would be to drop the special-casing of these callers.
That would cause a discrepancy between libxl_domain_need_memory and
libxl_domain_create: the former would not include the iommu memory and
the latter would. That seems worse, but it's debateable.
Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Reviewed-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
Release-acked-by: Juergen Gross <jgross@xxxxxxxx>
---
tools/libxl/libxl_create.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_internal.h | 3 +++
tools/libxl/libxl_mem.c | 4 ++++
tools/xl/xl_parse.c | 15 ++-------------
4 files changed, 53 insertions(+), 13 deletions(-)
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index fd8bb22be9..3b3b6ec381 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -247,9 +247,14 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
libxl__arch_domain_build_info_setdefault(gc, b_info);
libxl_defbool_setdefault(&b_info->dm_restrict, false);
+ if (b_info->iommu_memkb == LIBXL_MEMKB_DEFAULT)
+ /* Normally defaulted in libxl__domain_create_info_setdefault */
+ b_info->iommu_memkb = 0;
+
switch (b_info->type) {
case LIBXL_DOMAIN_TYPE_HVM:
if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
+ /* Normally defaulted in libxl__domain_create_info_setdefault */
b_info->shadow_memkb = 0;
if (b_info->u.hvm.mmio_hole_memkb == LIBXL_MEMKB_DEFAULT)
b_info->u.hvm.mmio_hole_memkb = 0;
@@ -395,6 +400,7 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT)
b_info->video_memkb = 0;
if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
+ /* Normally defaulted in libxl__domain_create_info_setdefault */
b_info->shadow_memkb = 0;
if (b_info->u.pv.slack_memkb == LIBXL_MEMKB_DEFAULT)
b_info->u.pv.slack_memkb = 0;
@@ -862,6 +868,30 @@ static void domcreate_destruction_cb(libxl__egc *egc,
libxl__domain_destroy_state *dds,
int rc);
+static bool ok_to_default_memkb_in_create(libxl__gc *gc)
+{
+ /*
+ * This is a fudge. We are trying to find whether the caller
+ * calls the old version of libxl_domain_need_memory. If they do
+ * then, because it only gets the b_info, and because it can't
+ * update the b_info (because it's const), it will base its
+ * calculations on defaulting shadow_memkb and iommu_memkb to 0
+ * In that case we probably shouldn't default them differently
+ * during libxl_domain_create.
+ *
+ * The result is that the behaviour with old callers is the same
+ * as in 4.13: no additional memory is allocated for shadow and
+ * iommu (unless the caller set shadow_memkb, eg from a call to
+ * libxl_get_required_shadow_memory).
+ */
+ return !CTX->libxl_domain_need_memory_0x041200_called ||
+ CTX->libxl_domain_need_memory_called;
+ /*
+ * Treat mixed callers as new callers. Presumably they know what
+ * they are doing.
+ */
+}
+
int libxl__domain_config_setdefault(libxl__gc *gc,
libxl_domain_config *d_config,
uint32_t domid)
@@ -974,6 +1004,20 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
goto error_out;
}
+ if (d_config->b_info.shadow_memkb == LIBXL_MEMKB_DEFAULT
+ && ok_to_default_memkb_in_create(gc))
+ d_config->b_info.shadow_memkb =
+ libxl_get_required_shadow_memory(d_config->b_info.max_memkb,
+ d_config->b_info.max_vcpus);
+
+ /* No IOMMU reservation is needed if passthrough mode is not 'sync_pt' */
+ if (d_config->b_info.iommu_memkb == LIBXL_MEMKB_DEFAULT
+ && ok_to_default_memkb_in_create(gc))
+ d_config->b_info.iommu_memkb =
+ (d_config->c_info.passthrough == LIBXL_PASSTHROUGH_SYNC_PT)
+ ? libxl_get_required_iommu_memory(d_config->b_info.max_memkb)
+ : 0;
+
ret = libxl__domain_build_info_setdefault(gc, &d_config->b_info);
if (ret) {
LOGD(ERROR, domid, "Unable to set domain build info defaults");
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 01de5576d9..0185b8ff01 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -637,6 +637,9 @@ struct libxl__ctx {
LIBXL_LIST_ENTRY(libxl_ctx) sigchld_users_entry;
libxl_version_info version_info;
+
+ bool libxl_domain_need_memory_0x041200_called,
+ libxl_domain_need_memory_called;
};
/*
diff --git a/tools/libxl/libxl_mem.c b/tools/libxl/libxl_mem.c
index 6042299393..7c01fac7e5 100644
--- a/tools/libxl/libxl_mem.c
+++ b/tools/libxl/libxl_mem.c
@@ -484,6 +484,8 @@ int libxl_domain_need_memory(libxl_ctx *ctx,
GC_INIT(ctx);
int rc;
+ ctx->libxl_domain_need_memory_called = 1;
+
rc = libxl__domain_config_setdefault(gc,
d_config,
domid_for_logging);
@@ -507,6 +509,8 @@ int libxl_domain_need_memory_0x041200(libxl_ctx *ctx,
GC_INIT(ctx);
int rc;
+ ctx->libxl_domain_need_memory_0x041200_called = 1;
+
libxl_domain_build_info b_info[1];
libxl_domain_build_info_init(b_info);
libxl_domain_build_info_copy(ctx, b_info, b_info_in);
diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c
index 03a2c54dd2..79871c22d0 100644
--- a/tools/xl/xl_parse.c
+++ b/tools/xl/xl_parse.c
@@ -1572,19 +1572,8 @@ void parse_config_data(const char *config_source,
exit(-ERROR_FAIL);
}
- /* libxl_get_required_shadow_memory() and
- * libxl_get_required_iommu_memory() must be called after final values
- * (default or specified) for vcpus and memory are set, because the
- * calculations depend on those values. */
- b_info->shadow_memkb = !xlu_cfg_get_long(config, "shadow_memory", &l, 0)
- ? l * 1024
- : libxl_get_required_shadow_memory(b_info->max_memkb,
- b_info->max_vcpus);
-
- /* No IOMMU reservation is needed if passthrough mode is not 'sync_pt' */
- b_info->iommu_memkb = (c_info->passthrough == LIBXL_PASSTHROUGH_SYNC_PT)
- ? libxl_get_required_iommu_memory(b_info->max_memkb)
- : 0;
+ if (!xlu_cfg_get_long(config, "shadow_memory", &l, 0))
+ b_info->shadow_memkb = l * 1024;
xlu_cfg_get_defbool(config, "nomigrate", &b_info->disable_migrate, 0);
--
generated by git-patchbot for /home/xen/git/xen.git#staging
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |