|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging] libxl/xl: Overhaul passthrough setting logic
commit ad011ad08843f60f9ae17b9ae4aa5907674d72af
Author: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
AuthorDate: Mon Oct 7 17:59:15 2019 +0100
Commit: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
CommitDate: Thu Oct 24 16:08:41 2019 +0100
libxl/xl: Overhaul passthrough setting logic
LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted
version of this code) is doing double duty. We actually need all of
the following to be specifiable:
* "default": enable PT iff we have devices to
pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.
Defaulting and error checking should be done in libxl. So, we make
several changes here.
We introduce "enabled", and rename "unknown" to "default".
We move all of the error checking and defaulting code from xl into
libxl. Now, libxl__domain_config_setdefault has all of the necessary
information to get this right. So we can do it all there. Choosing
the specific mode is arch-specific.
We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were
specified (ii) whether pt_share can be used (for each arch).
xl now only has to parse the enum in the same way as it parses all
other enums.
This change fixes a regression from earlier 4.13-pre: until recent
changes, passthrough was only enabled by default if passthrough
devices were specified. We restore this behaviour.
Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
CC: Stefano Stabellini <sstabellini@xxxxxxxxxx>
CC: Julien Grall <julien@xxxxxxx>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx>
CC: Andrew Cooper <Andrew.Cooper3@xxxxxxxxxx>
CC: Paul Durrant <pdurrant@xxxxxxxxx>
CC: Jan Beulich <jbeulich@xxxxxxxx>
Release-acked-by: Juergen Gross <jgross@xxxxxxxx>
Acked-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
---
docs/man/xl.cfg.5.pod.in | 6 ++++
tools/libxl/libxl_arch.h | 6 ++++
tools/libxl/libxl_arm.c | 24 ++++++++++++++++
tools/libxl/libxl_create.c | 43 ++++++++++++++++++++---------
tools/libxl/libxl_types.idl | 7 +++--
tools/libxl/libxl_x86.c | 41 +++++++++++++++++++++++++++
tools/xl/xl_parse.c | 67 ++++-----------------------------------------
7 files changed, 116 insertions(+), 78 deletions(-)
diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in
index 64bed30bce..245d3f9472 100644
--- a/docs/man/xl.cfg.5.pod.in
+++ b/docs/man/xl.cfg.5.pod.in
@@ -660,6 +660,12 @@ in preference. However, the availability of this option is
hardware
specific. If B<xl info> reports B<virt_caps> containing
B<iommu_hap_pt_share> then this option may be used.
+=item B<default>
+
+The default, which chooses between B<disabled> and B<enabled>
+according to whether passthrough devices are enabled in the config
+file.
+
=back
=back
diff --git a/tools/libxl/libxl_arch.h b/tools/libxl/libxl_arch.h
index d624159e53..ee6641b3e6 100644
--- a/tools/libxl/libxl_arch.h
+++ b/tools/libxl/libxl_arch.h
@@ -73,6 +73,12 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
libxl_domain_build_info *b_info);
_hidden
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+ uint32_t domid,
+ libxl_domain_config *d_config,
+ const libxl_physinfo *physinfo);
+
+_hidden
int libxl__arch_extra_memory(libxl__gc *gc,
const libxl_domain_build_info *info,
uint64_t *out);
diff --git a/tools/libxl/libxl_arm.c b/tools/libxl/libxl_arm.c
index bf31b9b3ca..2f1ca69431 100644
--- a/tools/libxl/libxl_arm.c
+++ b/tools/libxl/libxl_arm.c
@@ -1191,6 +1191,30 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc
*gc,
libxl_domain_build_info_init_type(b_info, LIBXL_DOMAIN_TYPE_PVH);
}
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+ uint32_t domid,
+ libxl_domain_config *d_config,
+ const libxl_physinfo *physinfo)
+{
+ int rc;
+ libxl_domain_create_info *const c_info = &d_config->c_info;
+
+ if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+ c_info->passthrough = LIBXL_PASSTHROUGH_SHARE_PT;
+ }
+
+ if (c_info->passthrough == LIBXL_PASSTHROUGH_SYNC_PT) {
+ LOGD(ERROR, domid,
+ "passthrough=\"sync_pt\" not supported on ARM\n");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ rc = 0;
+ out:
+ return rc;
+}
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 7869d54b32..d59ac2ab05 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -57,18 +57,6 @@ int libxl__domain_create_info_setdefault(libxl__gc *gc,
if (!c_info->ssidref)
c_info->ssidref = SECINITSID_DOMU;
- if (info->cap_hvm_directio &&
- (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN)) {
- c_info->passthrough = ((c_info->type == LIBXL_DOMAIN_TYPE_PV) ||
- !info->cap_iommu_hap_pt_share) ?
- LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
- } else if (!info->cap_hvm_directio) {
- c_info->passthrough = LIBXL_PASSTHROUGH_DISABLED;
- }
-
- /* An explicit setting should now have been chosen */
- assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
-
return 0;
}
@@ -591,7 +579,7 @@ int libxl__domain_make(libxl__gc *gc, libxl_domain_config
*d_config,
libxl_defbool_val(info->oos) ? 0 : XEN_DOMCTL_CDF_oos_off;
}
- assert(info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
+ assert(info->passthrough != LIBXL_PASSTHROUGH_DEFAULT);
LOG(DETAIL, "passthrough: %s",
libxl_passthrough_to_string(info->passthrough));
@@ -908,6 +896,7 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
libxl_ctx *ctx = libxl__gc_owner(gc);
int ret;
bool pod_enabled = false;
+ libxl_domain_create_info *c_info = &d_config->c_info;
libxl_physinfo physinfo;
ret = libxl_get_physinfo(CTX, &physinfo);
@@ -979,6 +968,34 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
goto error_out;
}
+ bool need_pt = d_config->num_pcidevs || d_config->num_dtdevs;
+ if (c_info->passthrough == LIBXL_PASSTHROUGH_DEFAULT) {
+ c_info->passthrough = need_pt
+ ? LIBXL_PASSTHROUGH_ENABLED : LIBXL_PASSTHROUGH_DISABLED;
+ }
+
+ bool iommu_enabled = physinfo.cap_hvm_directio;
+ if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED && !iommu_enabled) {
+ LOGD(ERROR, domid,
+ "passthrough not supported on this platform\n");
+ ret = ERROR_INVAL;
+ goto error_out;
+ }
+
+ if (c_info->passthrough == LIBXL_PASSTHROUGH_DISABLED && need_pt) {
+ LOGD(ERROR, domid,
+ "passthrough disabled but devices are specified");
+ ret = ERROR_INVAL;
+ goto error_out;
+ }
+
+ ret = libxl__arch_passthrough_mode_setdefault(gc,domid,d_config,&physinfo);
+ if (ret) goto error_out;
+
+ /* An explicit setting should now have been chosen */
+ assert(c_info->passthrough != LIBXL_PASSTHROUGH_DEFAULT);
+ assert(c_info->passthrough != LIBXL_PASSTHROUGH_ENABLED);
+
/* If target_memkb is smaller than max_memkb, the subsequent call
* to libxc when building HVM domain will enable PoD mode.
*/
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 3ac9494b80..0546d7865a 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -264,10 +264,11 @@ libxl_vkb_backend = Enumeration("vkb_backend", [
])
libxl_passthrough = Enumeration("passthrough", [
- (0, "unknown"),
+ (0, "default"),
(1, "disabled"),
- (2, "sync_pt"),
- (3, "share_pt"),
+ (2, "enabled"), # becomes {sync,share}_pt once defaults are evaluated
+ (3, "sync_pt"),
+ (4, "share_pt"),
])
#
diff --git a/tools/libxl/libxl_x86.c b/tools/libxl/libxl_x86.c
index c0f88a7eaa..8b804537ba 100644
--- a/tools/libxl/libxl_x86.c
+++ b/tools/libxl/libxl_x86.c
@@ -631,6 +631,47 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc
*gc,
libxl_defbool_setdefault(&b_info->acpi, true);
}
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+ uint32_t domid,
+ libxl_domain_config *d_config,
+ const libxl_physinfo *physinfo)
+{
+ int rc;
+ libxl_domain_create_info *const c_info = &d_config->c_info;
+
+ if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED &&
+ c_info->type == LIBXL_DOMAIN_TYPE_PVH) {
+ LOGD(ERROR, domid,
+ "passthrough not yet supported for x86 PVH guests\n");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ const char *whynot_pt_share =
+ c_info->type == LIBXL_DOMAIN_TYPE_PV ? "not valid for PV domain" :
+ !physinfo->cap_iommu_hap_pt_share ? "not supported on this platform" :
+ !libxl_defbool_val(d_config->c_info.hap) ?"only valid for HAP guests":
+ NULL;
+
+ if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+ c_info->passthrough = whynot_pt_share
+ ? LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
+ }
+
+ if (c_info->passthrough == LIBXL_PASSTHROUGH_SHARE_PT && whynot_pt_share) {
+ LOGD(ERROR, domid,
+ "passthrough=\"share_pt\" %s\n",
+ whynot_pt_share);
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ rc = 0;
+ out:
+ return rc;
+}
+
+
/*
* Local variables:
* mode: C
diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c
index 79871c22d0..112f8ee026 100644
--- a/tools/xl/xl_parse.c
+++ b/tools/xl/xl_parse.c
@@ -1222,7 +1222,6 @@ void parse_config_data(const char *config_source,
int pci_seize = 0;
int i, e;
char *kernel_basename;
- bool iommu_enabled, iommu_hap_pt_share;
libxl_domain_create_info *c_info = &d_config->c_info;
libxl_domain_build_info *b_info = &d_config->b_info;
@@ -1234,8 +1233,6 @@ void parse_config_data(const char *config_source,
exit(EXIT_FAILURE);
}
- iommu_enabled = physinfo.cap_hvm_directio;
- iommu_hap_pt_share = physinfo.cap_iommu_hap_pt_share;
libxl_physinfo_dispose(&physinfo);
config= xlu_cfg_init(stderr, config_source);
@@ -1509,67 +1506,13 @@ void parse_config_data(const char *config_source,
}
}
- if (xlu_cfg_get_string(config, "passthrough", &buf, 0)) {
- c_info->passthrough =
- (d_config->num_pcidevs || d_config->num_dtdevs)
- ? LIBXL_PASSTHROUGH_UNKNOWN : LIBXL_PASSTHROUGH_DISABLED;
- } else {
- if (!strcasecmp("enabled", buf))
- c_info->passthrough = LIBXL_PASSTHROUGH_UNKNOWN;
- else {
- libxl_passthrough o;
-
- e = libxl_passthrough_from_string(buf, &o);
- if (e || !strcasecmp("unknown", buf)) {
- fprintf(stderr,
- "ERROR: unknown passthrough option '%s'\n",
- buf);
- exit(-ERROR_FAIL);
- }
-
- c_info->passthrough = o;
- }
- }
-
- switch (c_info->passthrough) {
- case LIBXL_PASSTHROUGH_UNKNOWN:
- /*
- * Choose a suitable default. libxl would also do this but
- * choosing here allows the code calculating 'iommu_memkb'
- * below make an informed decision.
- */
- c_info->passthrough =
- (c_info->type == LIBXL_DOMAIN_TYPE_PV) || !iommu_hap_pt_share
- ? LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
- break;
-
- case LIBXL_PASSTHROUGH_DISABLED:
- if (d_config->num_pcidevs || d_config->num_dtdevs) {
+ if (!xlu_cfg_get_string(config, "passthrough", &buf, 0)) {
+ if (libxl_passthrough_from_string(buf, &c_info->passthrough)) {
fprintf(stderr,
- "ERROR: passthrough disabled but devices are specified\n");
- exit(-ERROR_FAIL);
- }
- break;
- case LIBXL_PASSTHROUGH_SHARE_PT:
- if (c_info->type == LIBXL_DOMAIN_TYPE_PV) {
- fprintf(stderr,
- "ERROR: passthrough=\"share_pt\" not valid for PV
domain\n");
- exit(-ERROR_FAIL);
- } else if (!iommu_hap_pt_share) {
- fprintf(stderr,
- "ERROR: passthrough=\"share_pt\" not supported on this
platform\n");
- exit(-ERROR_FAIL);
+ "ERROR: unknown passthrough option '%s'\n",
+ buf);
+ exit(1);
}
- break;
- case LIBXL_PASSTHROUGH_SYNC_PT:
- break;
- }
-
- if ((c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED) &&
- !iommu_enabled) {
- fprintf(stderr,
- "ERROR: passthrough not supported on this platform\n");
- exit(-ERROR_FAIL);
}
if (!xlu_cfg_get_long(config, "shadow_memory", &l, 0))
--
generated by git-patchbot for /home/xen/git/xen.git#staging
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |