|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging-4.12] xen/arm: alternative: add auto-nop infrastructure
commit 1f86e9a8d321a899317cfcaa65869bcc9547badf
Author: Mark Rutland <mark.rutland@xxxxxxx>
AuthorDate: Tue Sep 24 12:25:47 2019 +0100
Commit: Stefano Stabellini <sstabellini@xxxxxxxxxx>
CommitDate: Wed Nov 27 14:32:13 2019 -0800
xen/arm: alternative: add auto-nop infrastructure
In some cases, one side of an alternative sequence is simply a number of
NOPs used to balance the other side. Keeping track of this manually is
tedious, and the presence of large chains of NOPs makes the code more
painful to read than necessary.
To ameliorate matters, this patch adds a new alternative_else_nop_endif,
which automatically balances an alternative sequence with a trivial NOP
sled.
In many cases, we would like a NOP-sled in the default case, and
instructions patched in in the presence of a feature. To enable the NOPs
to be generated automatically for this case, this patch also adds a new
alternative_if, and updates alternative_else and alternative_endif to
work with either alternative_if or alternative_endif.
The alternative infrastructure was originally ported from Linux. So this
is pretty much a straight backport from commit 792d47379f4d "arm64:
alternative: add auto-nop infrastructure". The only difference is the
nops macro added as not yet existing in Xen.
Signed-off-by: Mark Rutland <mark.rutland@xxxxxxx>
[will: use new nops macro to generate nop sequences]
Signed-off-by: Will Deacon <will.deacon@xxxxxxx>
[julien: Add nops and port to Xen]
Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>
Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
Release-acked-by: Juergen Gross <jgross@xxxxxxxx>
(cherry picked from commit f11fda966365db591d280ac1522993409e20fd8c)
---
xen/include/asm-arm/alternative.h | 71 +++++++++++++++++++++++++++++----------
xen/include/asm-arm/macros.h | 7 ++++
2 files changed, 61 insertions(+), 17 deletions(-)
diff --git a/xen/include/asm-arm/alternative.h
b/xen/include/asm-arm/alternative.h
index 2830a6da2d..92e888aff8 100644
--- a/xen/include/asm-arm/alternative.h
+++ b/xen/include/asm-arm/alternative.h
@@ -2,6 +2,7 @@
#define __ASM_ALTERNATIVE_H
#include <asm/cpufeature.h>
+#include <asm/insn.h>
#define ARM_CB_PATCH ARM_NCAPS
@@ -87,6 +88,7 @@ int apply_alternatives(const struct alt_instr *start, const
struct alt_instr *en
#else
#include <asm/asm_defns.h>
+#include <asm/macros.h>
.macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len
.word \orig_offset - .
@@ -111,34 +113,55 @@ int apply_alternatives(const struct alt_instr *start,
const struct alt_instr *en
.endm
/*
- * Begin an alternative code sequence.
+ * Alternative sequences
+ *
+ * The code for the case where the capability is not present will be
+ * assembled and linked as normal. There are no restrictions on this
+ * code.
+ *
+ * The code for the case where the capability is present will be
+ * assembled into a special section to be used for dynamic patching.
+ * Code for that case must:
+ *
+ * 1. Be exactly the same length (in bytes) as the default code
+ * sequence.
*
- * The code that follows this macro will be assembled and linked as
- * normal. There are no restrictions on this code.
+ * 2. Not contain a branch target that is used outside of the
+ * alternative sequence it is defined in (branches into an
+ * alternative sequence are not fixed up).
+ */
+
+/*
+ * Begin an alternative code sequence.
*/
.macro alternative_if_not cap
+ .set .Lasm_alt_mode, 0
.pushsection .altinstructions, "a"
altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f
.popsection
661:
.endm
+.macro alternative_if cap
+ .set .Lasm_alt_mode, 1
+ .pushsection .altinstructions, "a"
+ altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f
+ .popsection
+ .pushsection .altinstr_replacement, "ax"
+ .align 2 /* So GAS knows label 661 is suitably aligned */
+661:
+.endm
+
/*
- * Provide the alternative code sequence.
- *
- * The code that follows this macro is assembled into a special
- * section to be used for dynamic patching. Code that follows this
- * macro must:
- *
- * 1. Be exactly the same length (in bytes) as the default code
- * sequence.
- *
- * 2. Not contain a branch target that is used outside of the
- * alternative sequence it is defined in (branches into an
- * alternative sequence are not fixed up).
+ * Provide the other half of the alternative code sequence.
*/
.macro alternative_else
-662: .pushsection .altinstr_replacement, "ax"
+662:
+ .if .Lasm_alt_mode==0
+ .pushsection .altinstr_replacement, "ax"
+ .else
+ .popsection
+ .endif
663:
.endm
@@ -154,12 +177,26 @@ int apply_alternatives(const struct alt_instr *start,
const struct alt_instr *en
* Complete an alternative code sequence.
*/
.macro alternative_endif
-664: .popsection
+664:
+ .if .Lasm_alt_mode==0
+ .popsection
+ .endif
.org . - (664b-663b) + (662b-661b)
.org . - (662b-661b) + (664b-663b)
.endm
/*
+ * Provides a trivial alternative or default sequence consisting solely
+ * of NOPs. The number of NOPs is chosen automatically to match the
+ * previous case.
+ */
+.macro alternative_else_nop_endif
+alternative_else
+ nops (662b-661b) / ARCH_PATCH_INSN_SIZE
+alternative_endif
+.endm
+
+/*
* Callback-based alternative epilogue
*/
.macro alternative_cb_end
diff --git a/xen/include/asm-arm/macros.h b/xen/include/asm-arm/macros.h
index 1d4bb41d15..91ea3505e4 100644
--- a/xen/include/asm-arm/macros.h
+++ b/xen/include/asm-arm/macros.h
@@ -13,4 +13,11 @@
# error "unknown ARM variant"
#endif
+ /* NOP sequence */
+ .macro nops, num
+ .rept \num
+ nop
+ .endr
+ .endm
+
#endif /* __ASM_ARM_MACROS_H */
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.12
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |