[Xen-changelog] [xen stable-4.12] x86/svm: Write the correct %eip into the outgoing task

[patchbot@xxxxxxx]

commit 08473cf60d9c30153ee54753fdcfd5bd165a2820
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Fri Dec 6 12:45:05 2019 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Fri Dec 6 12:45:05 2019 +0100

    x86/svm: Write the correct %eip into the outgoing task
    
    The TASK_SWITCH vmexit has fault semantics, and doesn't provide any NRIPs
    assistance with instruction length.  As a result, any instruction-induced 
task
    switch has the outgoing task's %eip pointing at the instruction switch 
caused
    the switch, rather than after it.
    
    This causes callers of task gates to livelock (repeatedly execute the 
call/jmp
    to enter the task), and any restartable task to become a nop after its first
    use (the (re)entry state points at the iret used to exit the task).
    
    32bit Windows in particular is known to use task gates for NMI handling, and
    to use NMI IPIs.
    
    In the task switch handler, distinguish instruction-induced from
    interrupt/exception-induced task switches, and decode the instruction under
    %rip to calculate its length.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    master commit: 1d758bc6d1a8c0f658a874470c349ee4e27aee46
    master date: 2019-11-28 17:14:38 +0000
---
 xen/arch/x86/hvm/svm/emulate.c        | 54 ++++++++++++++++++++++++++++++++
 xen/arch/x86/hvm/svm/svm.c            | 58 +++++++++++++++++++++++++++++------
 xen/include/asm-x86/hvm/svm/emulate.h |  1 +
 3 files changed, 103 insertions(+), 10 deletions(-)

diff --git a/xen/arch/x86/hvm/svm/emulate.c b/xen/arch/x86/hvm/svm/emulate.c
index 3e52592847..d586bad127 100644
--- a/xen/arch/x86/hvm/svm/emulate.c
+++ b/xen/arch/x86/hvm/svm/emulate.c
@@ -117,6 +117,60 @@ unsigned int svm_get_insn_len(struct vcpu *v, unsigned int 
instr_enc)
 }
 
 /*
+ * TASK_SWITCH vmexits never provide an instruction length.  We must always
+ * decode under %rip to find the answer.
+ */
+unsigned int svm_get_task_switch_insn_len(void)
+{
+    struct hvm_emulate_ctxt ctxt;
+    struct x86_emulate_state *state;
+    unsigned int emul_len, modrm_reg;
+
+    hvm_emulate_init_once(&ctxt, NULL, guest_cpu_user_regs());
+    hvm_emulate_init_per_insn(&ctxt, NULL, 0);
+    state = x86_decode_insn(&ctxt.ctxt, hvmemul_insn_fetch);
+    if ( IS_ERR_OR_NULL(state) )
+        return 0;
+
+    emul_len = x86_insn_length(state, &ctxt.ctxt);
+
+    /*
+     * Check for an instruction which can cause a task switch.  Any far
+     * jmp/call/ret, any software interrupt/exception with trap semantics
+     * (except icebp - handled specially), and iret.
+     */
+    switch ( ctxt.ctxt.opcode )
+    {
+    case 0xff: /* Grp 5 */
+        /* call / jmp (far, absolute indirect) */
+        if ( (unsigned int)x86_insn_modrm(state, NULL, &modrm_reg) >= 3 ||
+             (modrm_reg != 3 && modrm_reg != 5) )
+        {
+    default:
+            printk(XENLOG_G_WARNING "Bad instruction for task switch\n");
+            hvm_dump_emulation_state(XENLOG_G_WARNING, "SVM Insn len",
+                                     &ctxt, X86EMUL_UNHANDLEABLE);
+            emul_len = 0;
+            break;
+        }
+        /* Fallthrough */
+    case 0x9a: /* call (far, absolute) */
+    case 0xca: /* ret imm16 (far) */
+    case 0xcb: /* ret (far) */
+    case 0xcc: /* int3 */
+    case 0xcd: /* int imm8 */
+    case 0xce: /* into */
+    case 0xcf: /* iret */
+    case 0xea: /* jmp (far, absolute) */
+        break;
+    }
+
+    x86_emulate_free_state(state);
+
+    return emul_len;
+}
+
+/*
  * Local variables:
  * mode: C
  * c-file-style: "BSD"
diff --git a/xen/arch/x86/hvm/svm/svm.c b/xen/arch/x86/hvm/svm/svm.c
index c20d4c7800..9128e923b0 100644
--- a/xen/arch/x86/hvm/svm/svm.c
+++ b/xen/arch/x86/hvm/svm/svm.c
@@ -2853,7 +2853,52 @@ void svm_vmexit_handler(struct cpu_user_regs *regs)
 
     case VMEXIT_TASK_SWITCH: {
         enum hvm_task_switch_reason reason;
-        int32_t errcode = -1;
+        int32_t errcode = -1, insn_len = -1;
+
+        /*
+         * All TASK_SWITCH intercepts have fault-like semantics.  NRIP is
+         * never provided, even for instruction-induced task switches, but we
+         * need to know the instruction length in order to set %eip suitably
+         * in the outgoing TSS.
+         *
+         * For a task switch which vectored through the IDT, look at the type
+         * to distinguish interrupts/exceptions from instruction based
+         * switches.
+         */
+        if ( vmcb->exitintinfo.fields.v )
+        {
+            switch ( vmcb->exitintinfo.fields.type )
+            {
+                /*
+                 * #BP and #OF are from INT3/INTO respectively.  #DB from
+                 * ICEBP is handled specially, and already has fault
+                 * semantics.
+                 */
+            case X86_EVENTTYPE_HW_EXCEPTION:
+                if ( vmcb->exitintinfo.fields.vector == TRAP_int3 ||
+                     vmcb->exitintinfo.fields.vector == TRAP_overflow )
+                    break;
+                /* Fallthrough */
+            case X86_EVENTTYPE_EXT_INTR:
+            case X86_EVENTTYPE_NMI:
+                insn_len = 0;
+                break;
+            }
+
+            /*
+             * The common logic above will have forwarded the vectoring
+             * information.  Undo this as we are going to emulate.
+             */
+            vmcb->eventinj.bytes = 0;
+        }
+
+        /*
+         * insn_len being -1 indicates that we have an instruction-induced
+         * task switch.  Decode under %rip to find its length.
+         */
+        if ( insn_len < 0 && (insn_len = svm_get_task_switch_insn_len()) == 0 )
+            goto crash_or_fault;
+
         if ( (vmcb->exitinfo2 >> 36) & 1 )
             reason = TSW_iret;
         else if ( (vmcb->exitinfo2 >> 38) & 1 )
@@ -2863,15 +2908,7 @@ void svm_vmexit_handler(struct cpu_user_regs *regs)
         if ( (vmcb->exitinfo2 >> 44) & 1 )
             errcode = (uint32_t)vmcb->exitinfo2;
 
-        /*
-         * Some processors set the EXITINTINFO field when the task switch
-         * is caused by a task gate in the IDT. In this case we will be
-         * emulating the event injection, so we do not want the processor
-         * to re-inject the original event!
-         */
-        vmcb->eventinj.bytes = 0;
-
-        hvm_task_switch(vmcb->exitinfo1, reason, errcode, 0);
+        hvm_task_switch(vmcb->exitinfo1, reason, errcode, insn_len);
         break;
     }
 
@@ -3068,6 +3105,7 @@ void svm_vmexit_handler(struct cpu_user_regs *regs)
         gprintk(XENLOG_ERR, "Unexpected vmexit: reason %#"PRIx64", "
                 "exitinfo1 %#"PRIx64", exitinfo2 %#"PRIx64"\n",
                 exit_reason, vmcb->exitinfo1, vmcb->exitinfo2);
+    crash_or_fault:
         svm_crash_or_fault(v);
         break;
     }
diff --git a/xen/include/asm-x86/hvm/svm/emulate.h 
b/xen/include/asm-x86/hvm/svm/emulate.h
index 9af10061c5..eb1a8c24af 100644
--- a/xen/include/asm-x86/hvm/svm/emulate.h
+++ b/xen/include/asm-x86/hvm/svm/emulate.h
@@ -51,6 +51,7 @@
 struct vcpu;
 
 unsigned int svm_get_insn_len(struct vcpu *v, unsigned int instr_enc);
+unsigned int svm_get_task_switch_insn_len(void);
 
 #endif /* __ASM_X86_HVM_SVM_EMULATE_H__ */
 
--
generated by git-patchbot for /home/xen/git/xen.git#stable-4.12

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog