[Xen-changelog] [xen master] x86/boot: Clean up l?_bootmap[] construction

[patchbot@xxxxxxx]

commit a8d27a54cc9cccac38a515cdf6339d5ef9d4fcb8
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Mon Jan 6 13:37:54 2020 +0000
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Fri Jan 10 17:45:30 2020 +0000

    x86/boot: Clean up l?_bootmap[] construction
    
    The need for Xen to be identity mapped into the bootmap is not obvious, and
    differs between the MB and EFI boot paths.
    
    The EFI side is further complicated by an attempt to cope with with 
l2_bootmap
    only being 4k long.  This is undocumented, confusing, only works if Xen is 
the
    single object wanting mapping.
    
    The pageables are common to both the MB and EFI builds, so simplify the EFI
    bootmap construction code to make exactly one identity-map of Xen, which now
    makes the two paths consistent.  Comment both pieces of logic, explaining 
what
    the mappings are needed for.
    
    Finally, leave a linker assert covering the fact that plenty of code blindly
    assumes that Xen is less that 16M.  This wants fixing in due course.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/arch/x86/boot/head.S    |  8 ++++++--
 xen/arch/x86/efi/efi-boot.h | 20 +++++++++++++-------
 xen/arch/x86/xen.lds.S      |  3 +++
 3 files changed, 22 insertions(+), 9 deletions(-)

diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index d152af4542..0b75d33a25 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -668,7 +668,11 @@ trampoline_setup:
         add     %esi,sym_fs(__page_tables_start)-8(,%ecx,8)
 2:      loop    1b
 
-        /* Initialize L2 boot-map/direct map page table entries (16MB). */
+        /*
+         * Map Xen into the directmap (needed for early-boot pagetable
+         * handling/walking), and identity map Xen into bootmap (needed for
+         * the transition into long mode), using 2M superpages.
+         */
         lea     sym_esi(start),%ebx
         lea     
(1<<L2_PAGETABLE_SHIFT)*7+(PAGE_HYPERVISOR|_PAGE_PSE)(%ebx),%eax
         shr     $(L2_PAGETABLE_SHIFT-3),%ebx
@@ -678,7 +682,7 @@ trampoline_setup:
         sub     $(1<<L2_PAGETABLE_SHIFT),%eax
         loop    1b
 
-        /* Initialize L3 boot-map page directory entry. */
+        /* Initialize L3 boot-map page directory entries. */
         lea     
__PAGE_HYPERVISOR+(L2_PAGETABLE_ENTRIES*8)*3+sym_esi(l2_bootmap),%eax
         mov     $4,%ecx
 1:      mov     %eax,sym_fs(l3_bootmap)-8(,%ecx,8)
diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index 9c036d5f4c..203a9d3bb2 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -585,21 +585,27 @@ static void __init efi_arch_memory_setup(void)
     if ( !efi_enabled(EFI_LOADER) )
         return;
 
-    /* Initialise L2 identity-map and boot-map page table entries (16MB). */
+    /* Check that there is at least 4G of mapping space in l2_*map[] */
+    BUILD_BUG_ON((sizeof(l2_bootmap)  / L2_PAGETABLE_ENTRIES) < 4);
+    BUILD_BUG_ON((sizeof(l2_identmap) / L2_PAGETABLE_ENTRIES) < 4);
+
+    /* Initialize L3 boot-map page directory entries. */
+    for ( i = 0; i < 4; ++i )
+        l3_bootmap[i] = l3e_from_paddr((UINTN)l2_bootmap + i * PAGE_SIZE,
+                                       __PAGE_HYPERVISOR);
+    /*
+     * Map Xen into the directmap (needed for early-boot pagetable
+     * handling/walking), and identity map Xen into bootmap (needed for the
+     * transition from the EFI pagetables to Xen), using 2M superpages.
+     */
     for ( i = 0; i < 8; ++i )
     {
         unsigned int slot = (xen_phys_start >> L2_PAGETABLE_SHIFT) + i;
         paddr_t addr = slot << L2_PAGETABLE_SHIFT;
 
         l2_identmap[slot] = l2e_from_paddr(addr, PAGE_HYPERVISOR|_PAGE_PSE);
-        slot &= L2_PAGETABLE_ENTRIES - 1;
         l2_bootmap[slot] = l2e_from_paddr(addr, __PAGE_HYPERVISOR|_PAGE_PSE);
     }
-    /* Initialise L3 boot-map page directory entries. */
-    l3_bootmap[l3_table_offset(xen_phys_start)] =
-        l3e_from_paddr((UINTN)l2_bootmap, __PAGE_HYPERVISOR);
-    l3_bootmap[l3_table_offset(xen_phys_start + (8 << L2_PAGETABLE_SHIFT) - 
1)] =
-        l3e_from_paddr((UINTN)l2_bootmap, __PAGE_HYPERVISOR);
 }
 
 static void __init efi_arch_handle_module(struct file *file, const CHAR16 
*name,
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index 111edb5360..7f82f64078 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -381,3 +381,6 @@ ASSERT((trampoline_end - trampoline_start) < 
TRAMPOLINE_SPACE - MBI_SPACE_MIN,
     "not enough room for trampoline and mbi data")
 ASSERT((wakeup_stack - wakeup_stack_start) >= WAKEUP_STACK_MIN,
     "wakeup stack too small")
+
+/* Plenty of boot code assumes that Xen isn't larger than 16M. */
+ASSERT(_end - _start <= MB(16), "Xen too large for early-boot assumptions")
--
generated by git-patchbot for /home/xen/git/xen.git#master

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog