[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] x86/pv: Rewrite segment context switching from scratch



commit ad0fd291c5e79191c2e3c70e43dded569f11a450
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Tue Aug 11 16:05:06 2020 +0100
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Mon Sep 7 11:32:34 2020 +0100

    x86/pv: Rewrite segment context switching from scratch
    
    There are multiple bugs with the existing implementation.
    
    On AMD CPUs prior to Zen2, loading a NUL segment selector doesn't clear the
    segment base, which is a problem for 64bit code which typically expects to 
use
    a NUL %fs/%gs selector.
    
    On a context switch from any PV vcpu, to a 64bit PV vcpu with an %fs/%gs
    selector which faults, the fixup logic loads NUL, and the guest is entered 
at
    the failsafe callback with the stale base.
    
    Alternatively, a PV context switch sequence of 64 (NUL, non-zero base) =>
    32 (NUL) => 64 (NUL, zero base) will similarly cause Xen to enter the guest
    with a stale base.
    
    Both of these corner cases manifest as state corruption in the final vcpu.
    However, damage is limited to to 64bit code expecting to use Thread Local
    Storage with a base pointer of 0, which doesn't occur by default.
    
    The context switch logic is extremely complicated, and is attempting to
    optimise away loading a NUL selector (which is fast), or writing a 64bit 
base
    of 0 (which is rare).  Furthermore, it fails to respect Linux's ABI with
    userspace, which manifests as userspace state corruption as far as Linux is
    concerned.
    
    Always restore all selector and base state, in all cases.
    
    Leave a large comment explaining hardware behaviour, and the new ABI
    expectations.  Update the comments in the public headers.
    
    Drop all "segment preloading" to handle the AMD corner case.  It was never
    anything but a waste of time for %ds/%es, and isn't needed now that %fs/%gs
    bases are unconditionally written for 64bit PV guests.  In load_segments(),
    store the result of is_pv_32bit_vcpu() as it is an expensive predicate now,
    and not used in a way which impacts speculative safety.
    
    Reported-by: Andy Lutomirski <luto@xxxxxxxxxx>
    Reported-by: Sarah Newman <srn@xxxxxxxxx>
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/arch/x86/domain.c                    | 184 ++++++++++---------------------
 xen/include/public/arch-x86/xen-x86_64.h |   4 +-
 2 files changed, 60 insertions(+), 128 deletions(-)

diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index f479bc6857..d4f4ced681 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -1186,13 +1186,9 @@ int arch_set_info_guest(
     if ( !compat )
     {
         v->arch.pv.syscall_callback_eip = c.nat->syscall_callback_eip;
-        /* non-nul selector kills fs_base */
-        v->arch.pv.fs_base =
-            !(v->arch.user_regs.fs & ~3) ? c.nat->fs_base : 0;
+        v->arch.pv.fs_base = c.nat->fs_base;
         v->arch.pv.gs_base_kernel = c.nat->gs_base_kernel;
-        /* non-nul selector kills gs_base_user */
-        v->arch.pv.gs_base_user =
-            !(v->arch.user_regs.gs & ~3) ? c.nat->gs_base_user : 0;
+        v->arch.pv.gs_base_user = c.nat->gs_base_user;
     }
     else
     {
@@ -1508,58 +1504,60 @@ arch_do_vcpu_op(
 }
 
 /*
- * Loading a nul selector does not clear bases and limits on AMD or Hygon
- * CPUs. Be on the safe side and re-initialize both to flat segment values
- * before loading a nul selector.
- */
-#define preload_segment(seg, value) do {              \
-    if ( !((value) & ~3) &&                           \
-         (boot_cpu_data.x86_vendor &                  \
-          (X86_VENDOR_AMD | X86_VENDOR_HYGON)) )      \
-        asm volatile ( "movl %k0, %%" #seg            \
-                       :: "r" (FLAT_USER_DS32) );     \
-} while ( false )
-
-#define loadsegment(seg,value) ({               \
-    int __r = 1;                                \
-    asm volatile (                              \
-        "1: movl %k1,%%" #seg "\n2:\n"          \
-        ".section .fixup,\"ax\"\n"              \
-        "3: xorl %k0,%k0\n"                     \
-        "   movl %k0,%%" #seg "\n"              \
-        "   jmp 2b\n"                           \
-        ".previous\n"                           \
-        _ASM_EXTABLE(1b, 3b)                    \
-        : "=r" (__r) : "r" (value), "0" (__r) );\
-    __r; })
-
-/*
- * save_segments() writes a mask of segments which are dirty (non-zero),
- * allowing load_segments() to avoid some expensive segment loads and
- * MSR writes.
+ * Notes on PV segment handling:
+ *  - 32bit: All data from the GDT/LDT.
+ *  - 64bit: In addition, 64bit FS/GS/GS_KERN bases.
+ *
+ * Linux's ABI with userspace expects to preserve the full selector and
+ * segment base, even sel != NUL, base != GDT/LDT for 64bit code.  Xen must
+ * honour this when context switching, to avoid breaking Linux's ABI.
+ *
+ * Note: It is impossible to preserve a selector value of 1, 2 or 3, as these
+ *       get reset to 0 by an IRET back to guest context.  Code playing with
+ *       arcane corners of x86 get to keep all resulting pieces.
+ *
+ * Therefore, we:
+ *  - Load the LDT.
+ *  - Load each segment selector.
+ *    - Any error loads zero, and triggers a failsafe callback.
+ *  - For 64bit, further load the 64bit bases.
+ *
+ * An optimisation exists on SVM-capable hardware, where we use a VMLOAD
+ * instruction to load the LDT and full FS/GS/GS_KERN data in one go.
+ *
+ * AMD-like CPUs prior to Zen2 do not zero the segment base or limit when
+ * loading a NUL selector.  This is a problem in principle when context
+ * switching to a 64bit guest, as a NUL FS/GS segment is usable and will pick
+ * up the stale base.
+ *
+ * However, it is not an issue in practice.  NUL segments are unusable for
+ * 32bit guests (so any stale base won't be used), and we unconditionally
+ * write the full FS/GS bases for 64bit guests.
  */
-static DEFINE_PER_CPU(unsigned int, dirty_segment_mask);
-#define DIRTY_DS           0x01
-#define DIRTY_ES           0x02
-#define DIRTY_FS           0x04
-#define DIRTY_GS           0x08
-#define DIRTY_FS_BASE      0x10
-#define DIRTY_GS_BASE      0x20
-
 static void load_segments(struct vcpu *n)
 {
     struct cpu_user_regs *uregs = &n->arch.user_regs;
-    int all_segs_okay = 1;
-    unsigned int dirty_segment_mask, cpu = smp_processor_id();
-    bool fs_gs_done = false;
+    bool compat = is_pv_32bit_vcpu(n);
+    bool all_segs_okay = true, fs_gs_done = false;
 
-    /* Load and clear the dirty segment mask. */
-    dirty_segment_mask = per_cpu(dirty_segment_mask, cpu);
-    per_cpu(dirty_segment_mask, cpu) = 0;
+    /*
+     * Attempt to load @seg with selector @val.  On error, clear
+     * @all_segs_okay in function scope, and load NUL into @sel.
+     */
+#define TRY_LOAD_SEG(seg, val)                          \
+    asm volatile ( "1: mov %k[_val], %%" #seg "\n\t"    \
+                   "2:\n\t"                             \
+                   ".section .fixup, \"ax\"\n\t"        \
+                   "3: xor %k[ok], %k[ok]\n\t"          \
+                   "   mov %k[ok], %%" #seg "\n\t"      \
+                   "   jmp 2b\n\t"                      \
+                   ".previous\n\t"                      \
+                   _ASM_EXTABLE(1b, 3b)                 \
+                   : [ok] "+r" (all_segs_okay)          \
+                   : [_val] "rm" (val) )
 
 #ifdef CONFIG_HVM
-    if ( cpu_has_svm && !is_pv_32bit_vcpu(n) &&
-         !(read_cr4() & X86_CR4_FSGSBASE) && !((uregs->fs | uregs->gs) & ~3) )
+    if ( cpu_has_svm && !compat )
     {
         unsigned long gsb = n->arch.flags & TF_kernel_mode
             ? n->arch.pv.gs_base_kernel : n->arch.pv.gs_base_user;
@@ -1572,57 +1570,21 @@ static void load_segments(struct vcpu *n)
     }
 #endif
     if ( !fs_gs_done )
-        load_LDT(n);
-
-    /* Either selector != 0 ==> reload. */
-    if ( unlikely((dirty_segment_mask & DIRTY_DS) | uregs->ds) )
     {
-        preload_segment(ds, uregs->ds);
-        all_segs_okay &= loadsegment(ds, uregs->ds);
-    }
-
-    /* Either selector != 0 ==> reload. */
-    if ( unlikely((dirty_segment_mask & DIRTY_ES) | uregs->es) )
-    {
-        preload_segment(es, uregs->es);
-        all_segs_okay &= loadsegment(es, uregs->es);
-    }
+        load_LDT(n);
 
-    /* Either selector != 0 ==> reload. */
-    if ( unlikely((dirty_segment_mask & DIRTY_FS) | uregs->fs) && !fs_gs_done )
-    {
-        all_segs_okay &= loadsegment(fs, uregs->fs);
-        /* non-nul selector updates fs_base */
-        if ( uregs->fs & ~3 )
-            dirty_segment_mask &= ~DIRTY_FS_BASE;
+        TRY_LOAD_SEG(fs, uregs->fs);
+        TRY_LOAD_SEG(gs, uregs->gs);
     }
 
-    /* Either selector != 0 ==> reload. */
-    if ( unlikely((dirty_segment_mask & DIRTY_GS) | uregs->gs) && !fs_gs_done )
-    {
-        all_segs_okay &= loadsegment(gs, uregs->gs);
-        /* non-nul selector updates gs_base_user */
-        if ( uregs->gs & ~3 )
-            dirty_segment_mask &= ~DIRTY_GS_BASE;
-    }
+    TRY_LOAD_SEG(ds, uregs->ds);
+    TRY_LOAD_SEG(es, uregs->es);
 
-    if ( !fs_gs_done && !is_pv_32bit_vcpu(n) )
+    if ( !fs_gs_done && !compat )
     {
-        /* This can only be non-zero if selector is NULL. */
-        if ( n->arch.pv.fs_base | (dirty_segment_mask & DIRTY_FS_BASE) )
-            wrfsbase(n->arch.pv.fs_base);
-
-        /*
-         * Most kernels have non-zero GS base, so don't bother testing.
-         * (For old AMD hardware this is also a serialising instruction,
-         * avoiding erratum #88.)
-         */
+        wrfsbase(n->arch.pv.fs_base);
         wrgsshadow(n->arch.pv.gs_base_kernel);
-
-        /* This can only be non-zero if selector is NULL. */
-        if ( n->arch.pv.gs_base_user |
-             (dirty_segment_mask & DIRTY_GS_BASE) )
-            wrgsbase(n->arch.pv.gs_base_user);
+        wrgsbase(n->arch.pv.gs_base_user);
 
         /* If in kernel mode then switch the GS bases around. */
         if ( (n->arch.flags & TF_kernel_mode) )
@@ -1741,7 +1703,6 @@ static void load_segments(struct vcpu *n)
 static void save_segments(struct vcpu *v)
 {
     struct cpu_user_regs *regs = &v->arch.user_regs;
-    unsigned int dirty_segment_mask = 0;
 
     regs->ds = read_sreg(ds);
     regs->es = read_sreg(es);
@@ -1758,35 +1719,6 @@ static void save_segments(struct vcpu *v)
         else
             v->arch.pv.gs_base_user = gs_base;
     }
-
-    if ( regs->ds )
-        dirty_segment_mask |= DIRTY_DS;
-
-    if ( regs->es )
-        dirty_segment_mask |= DIRTY_ES;
-
-    if ( regs->fs || is_pv_32bit_vcpu(v) )
-    {
-        dirty_segment_mask |= DIRTY_FS;
-        /* non-nul selector kills fs_base */
-        if ( regs->fs & ~3 )
-            v->arch.pv.fs_base = 0;
-    }
-    if ( v->arch.pv.fs_base )
-        dirty_segment_mask |= DIRTY_FS_BASE;
-
-    if ( regs->gs || is_pv_32bit_vcpu(v) )
-    {
-        dirty_segment_mask |= DIRTY_GS;
-        /* non-nul selector kills gs_base_user */
-        if ( regs->gs & ~3 )
-            v->arch.pv.gs_base_user = 0;
-    }
-    if ( v->arch.flags & TF_kernel_mode ? v->arch.pv.gs_base_kernel
-                                        : v->arch.pv.gs_base_user )
-        dirty_segment_mask |= DIRTY_GS_BASE;
-
-    this_cpu(dirty_segment_mask) = dirty_segment_mask;
 }
 
 void paravirt_ctxt_switch_from(struct vcpu *v)
@@ -1996,7 +1928,7 @@ static void __context_switch(void)
 #if defined(CONFIG_PV) && defined(CONFIG_HVM)
     /* Prefetch the VMCB if we expect to use it later in the context switch */
     if ( cpu_has_svm && is_pv_domain(nd) && !is_pv_32bit_domain(nd) &&
-         !is_idle_domain(nd) && !(read_cr4() & X86_CR4_FSGSBASE) )
+         !is_idle_domain(nd) )
         svm_load_segs(0, 0, 0, 0, 0, 0, 0);
 #endif
 
diff --git a/xen/include/public/arch-x86/xen-x86_64.h 
b/xen/include/public/arch-x86/xen-x86_64.h
index 342eabc957..40aed14366 100644
--- a/xen/include/public/arch-x86/xen-x86_64.h
+++ b/xen/include/public/arch-x86/xen-x86_64.h
@@ -203,8 +203,8 @@ struct cpu_user_regs {
     uint16_t ss, _pad2[3];
     uint16_t es, _pad3[3];
     uint16_t ds, _pad4[3];
-    uint16_t fs, _pad5[3]; /* Non-nul => takes precedence over fs_base.      */
-    uint16_t gs, _pad6[3]; /* Non-nul => takes precedence over gs_base_user. */
+    uint16_t fs, _pad5[3];
+    uint16_t gs, _pad6[3];
 };
 typedef struct cpu_user_regs cpu_user_regs_t;
 DEFINE_XEN_GUEST_HANDLE(cpu_user_regs_t);
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.