|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [qemu-xen staging] hw/char: Convert the Ibex UART to use the registerfields API
commit 59093cc407cb044c72aa786006a07bd404eb36b9
Author: Alistair Francis <alistair.francis@xxxxxxx>
AuthorDate: Thu Jul 9 15:04:51 2020 -0700
Commit: Alistair Francis <alistair.francis@xxxxxxx>
CommitDate: Mon Jul 13 17:25:37 2020 -0700
hw/char: Convert the Ibex UART to use the registerfields API
Signed-off-by: Alistair Francis <alistair.francis@xxxxxxx>
Message-id:
06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@xxxxxxx
Message-Id:
<06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@xxxxxxx>
---
hw/char/ibex_uart.c | 130 ++++++++++++++++++++++----------------------
include/hw/char/ibex_uart.h | 76 ++++++++++++--------------
2 files changed, 100 insertions(+), 106 deletions(-)
diff --git a/hw/char/ibex_uart.c b/hw/char/ibex_uart.c
index ab6247de89..cc49a35013 100644
--- a/hw/char/ibex_uart.c
+++ b/hw/char/ibex_uart.c
@@ -36,25 +36,25 @@
static void ibex_uart_update_irqs(IbexUartState *s)
{
- if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_WATERMARK) {
+ if (s->uart_intr_state & s->uart_intr_enable &
R_INTR_STATE_TX_WATERMARK_MASK) {
qemu_set_irq(s->tx_watermark, 1);
} else {
qemu_set_irq(s->tx_watermark, 0);
}
- if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_WATERMARK) {
+ if (s->uart_intr_state & s->uart_intr_enable &
R_INTR_STATE_RX_WATERMARK_MASK) {
qemu_set_irq(s->rx_watermark, 1);
} else {
qemu_set_irq(s->rx_watermark, 0);
}
- if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_EMPTY) {
+ if (s->uart_intr_state & s->uart_intr_enable & R_INTR_STATE_TX_EMPTY_MASK)
{
qemu_set_irq(s->tx_empty, 1);
} else {
qemu_set_irq(s->tx_empty, 0);
}
- if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_OVERFLOW) {
+ if (s->uart_intr_state & s->uart_intr_enable &
R_INTR_STATE_RX_OVERFLOW_MASK) {
qemu_set_irq(s->rx_overflow, 1);
} else {
qemu_set_irq(s->rx_overflow, 0);
@@ -65,7 +65,7 @@ static int ibex_uart_can_receive(void *opaque)
{
IbexUartState *s = opaque;
- if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
+ if (s->uart_ctrl & R_CTRL_RX_ENABLE_MASK) {
return 1;
}
@@ -75,16 +75,16 @@ static int ibex_uart_can_receive(void *opaque)
static void ibex_uart_receive(void *opaque, const uint8_t *buf, int size)
{
IbexUartState *s = opaque;
- uint8_t rx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_RXILVL)
- >> FIFO_CTRL_RXILVL_SHIFT;
+ uint8_t rx_fifo_level = (s->uart_fifo_ctrl & R_FIFO_CTRL_RXILVL_MASK)
+ >> R_FIFO_CTRL_RXILVL_SHIFT;
s->uart_rdata = *buf;
- s->uart_status &= ~UART_STATUS_RXIDLE;
- s->uart_status &= ~UART_STATUS_RXEMPTY;
+ s->uart_status &= ~R_STATUS_RXIDLE_MASK;
+ s->uart_status &= ~R_STATUS_RXEMPTY_MASK;
if (size > rx_fifo_level) {
- s->uart_intr_state |= INTR_STATE_RX_WATERMARK;
+ s->uart_intr_state |= R_INTR_STATE_RX_WATERMARK_MASK;
}
ibex_uart_update_irqs(s);
@@ -94,8 +94,8 @@ static gboolean ibex_uart_xmit(GIOChannel *chan, GIOCondition
cond,
void *opaque)
{
IbexUartState *s = opaque;
- uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
- >> FIFO_CTRL_TXILVL_SHIFT;
+ uint8_t tx_fifo_level = (s->uart_fifo_ctrl & R_FIFO_CTRL_TXILVL_MASK)
+ >> R_FIFO_CTRL_TXILVL_SHIFT;
int ret;
/* instant drain the fifo when there's no back-end */
@@ -105,10 +105,10 @@ static gboolean ibex_uart_xmit(GIOChannel *chan,
GIOCondition cond,
}
if (!s->tx_level) {
- s->uart_status &= ~UART_STATUS_TXFULL;
- s->uart_status |= UART_STATUS_TXEMPTY;
- s->uart_intr_state |= INTR_STATE_TX_EMPTY;
- s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
+ s->uart_status &= ~R_STATUS_TXFULL_MASK;
+ s->uart_status |= R_STATUS_TXEMPTY_MASK;
+ s->uart_intr_state |= R_INTR_STATE_TX_EMPTY_MASK;
+ s->uart_intr_state &= ~R_INTR_STATE_TX_WATERMARK_MASK;
ibex_uart_update_irqs(s);
return FALSE;
}
@@ -131,18 +131,18 @@ static gboolean ibex_uart_xmit(GIOChannel *chan,
GIOCondition cond,
/* Clear the TX Full bit */
if (s->tx_level != IBEX_UART_TX_FIFO_SIZE) {
- s->uart_status &= ~UART_STATUS_TXFULL;
+ s->uart_status &= ~R_STATUS_TXFULL_MASK;
}
/* Disable the TX_WATERMARK IRQ */
if (s->tx_level < tx_fifo_level) {
- s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
+ s->uart_intr_state &= ~R_INTR_STATE_TX_WATERMARK_MASK;
}
/* Set TX empty */
if (s->tx_level == 0) {
- s->uart_status |= UART_STATUS_TXEMPTY;
- s->uart_intr_state |= INTR_STATE_TX_EMPTY;
+ s->uart_status |= R_STATUS_TXEMPTY_MASK;
+ s->uart_intr_state |= R_INTR_STATE_TX_EMPTY_MASK;
}
ibex_uart_update_irqs(s);
@@ -153,8 +153,8 @@ static void uart_write_tx_fifo(IbexUartState *s, const
uint8_t *buf,
int size)
{
uint64_t current_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
- uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
- >> FIFO_CTRL_TXILVL_SHIFT;
+ uint8_t tx_fifo_level = (s->uart_fifo_ctrl & R_FIFO_CTRL_TXILVL_MASK)
+ >> R_FIFO_CTRL_TXILVL_SHIFT;
if (size > IBEX_UART_TX_FIFO_SIZE - s->tx_level) {
size = IBEX_UART_TX_FIFO_SIZE - s->tx_level;
@@ -165,16 +165,16 @@ static void uart_write_tx_fifo(IbexUartState *s, const
uint8_t *buf,
s->tx_level += size;
if (s->tx_level > 0) {
- s->uart_status &= ~UART_STATUS_TXEMPTY;
+ s->uart_status &= ~R_STATUS_TXEMPTY_MASK;
}
if (s->tx_level >= tx_fifo_level) {
- s->uart_intr_state |= INTR_STATE_TX_WATERMARK;
+ s->uart_intr_state |= R_INTR_STATE_TX_WATERMARK_MASK;
ibex_uart_update_irqs(s);
}
if (s->tx_level == IBEX_UART_TX_FIFO_SIZE) {
- s->uart_status |= UART_STATUS_TXFULL;
+ s->uart_status |= R_STATUS_TXFULL_MASK;
}
timer_mod(s->fifo_trigger_handle, current_time +
@@ -208,7 +208,7 @@ static uint64_t ibex_uart_get_baud(IbexUartState *s)
{
uint64_t baud;
- baud = ((s->uart_ctrl & UART_CTRL_NCO) >> 16);
+ baud = ((s->uart_ctrl & R_CTRL_NCO_MASK) >> 16);
baud *= clock_get_hz(s->f_clk);
baud >>= 20;
@@ -221,43 +221,43 @@ static uint64_t ibex_uart_read(void *opaque, hwaddr addr,
IbexUartState *s = opaque;
uint64_t retvalue = 0;
- switch (addr) {
- case IBEX_UART_INTR_STATE:
+ switch (addr >> 2) {
+ case R_INTR_STATE:
retvalue = s->uart_intr_state;
break;
- case IBEX_UART_INTR_ENABLE:
+ case R_INTR_ENABLE:
retvalue = s->uart_intr_enable;
break;
- case IBEX_UART_INTR_TEST:
+ case R_INTR_TEST:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: wdata is write only\n", __func__);
break;
- case IBEX_UART_CTRL:
+ case R_CTRL:
retvalue = s->uart_ctrl;
break;
- case IBEX_UART_STATUS:
+ case R_STATUS:
retvalue = s->uart_status;
break;
- case IBEX_UART_RDATA:
+ case R_RDATA:
retvalue = s->uart_rdata;
- if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
+ if (s->uart_ctrl & R_CTRL_RX_ENABLE_MASK) {
qemu_chr_fe_accept_input(&s->chr);
- s->uart_status |= UART_STATUS_RXIDLE;
- s->uart_status |= UART_STATUS_RXEMPTY;
+ s->uart_status |= R_STATUS_RXIDLE_MASK;
+ s->uart_status |= R_STATUS_RXEMPTY_MASK;
}
break;
- case IBEX_UART_WDATA:
+ case R_WDATA:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: wdata is write only\n", __func__);
break;
- case IBEX_UART_FIFO_CTRL:
+ case R_FIFO_CTRL:
retvalue = s->uart_fifo_ctrl;
break;
- case IBEX_UART_FIFO_STATUS:
+ case R_FIFO_STATUS:
retvalue = s->uart_fifo_status;
retvalue |= s->tx_level & 0x1F;
@@ -266,17 +266,17 @@ static uint64_t ibex_uart_read(void *opaque, hwaddr addr,
"%s: RX fifos are not supported\n", __func__);
break;
- case IBEX_UART_OVRD:
+ case R_OVRD:
retvalue = s->uart_ovrd;
qemu_log_mask(LOG_UNIMP,
"%s: ovrd is not supported\n", __func__);
break;
- case IBEX_UART_VAL:
+ case R_VAL:
retvalue = s->uart_val;
qemu_log_mask(LOG_UNIMP,
"%s: val is not supported\n", __func__);
break;
- case IBEX_UART_TIMEOUT_CTRL:
+ case R_TIMEOUT_CTRL:
retvalue = s->uart_timeout_ctrl;
qemu_log_mask(LOG_UNIMP,
"%s: timeout_ctrl is not supported\n", __func__);
@@ -296,95 +296,95 @@ static void ibex_uart_write(void *opaque, hwaddr addr,
IbexUartState *s = opaque;
uint32_t value = val64;
- switch (addr) {
- case IBEX_UART_INTR_STATE:
+ switch (addr >> 2) {
+ case R_INTR_STATE:
/* Write 1 clear */
s->uart_intr_state &= ~value;
ibex_uart_update_irqs(s);
break;
- case IBEX_UART_INTR_ENABLE:
+ case R_INTR_ENABLE:
s->uart_intr_enable = value;
ibex_uart_update_irqs(s);
break;
- case IBEX_UART_INTR_TEST:
+ case R_INTR_TEST:
s->uart_intr_state |= value;
ibex_uart_update_irqs(s);
break;
- case IBEX_UART_CTRL:
+ case R_CTRL:
s->uart_ctrl = value;
- if (value & UART_CTRL_NF) {
+ if (value & R_CTRL_NF_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: UART_CTRL_NF is not supported\n", __func__);
}
- if (value & UART_CTRL_SLPBK) {
+ if (value & R_CTRL_SLPBK_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: UART_CTRL_SLPBK is not supported\n", __func__);
}
- if (value & UART_CTRL_LLPBK) {
+ if (value & R_CTRL_LLPBK_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: UART_CTRL_LLPBK is not supported\n", __func__);
}
- if (value & UART_CTRL_PARITY_EN) {
+ if (value & R_CTRL_PARITY_EN_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: UART_CTRL_PARITY_EN is not supported\n",
__func__);
}
- if (value & UART_CTRL_PARITY_ODD) {
+ if (value & R_CTRL_PARITY_ODD_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: UART_CTRL_PARITY_ODD is not supported\n",
__func__);
}
- if (value & UART_CTRL_RXBLVL) {
+ if (value & R_CTRL_RXBLVL_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: UART_CTRL_RXBLVL is not supported\n", __func__);
}
- if (value & UART_CTRL_NCO) {
+ if (value & R_CTRL_NCO_MASK) {
uint64_t baud = ibex_uart_get_baud(s);
s->char_tx_time = (NANOSECONDS_PER_SECOND / baud) * 10;
}
break;
- case IBEX_UART_STATUS:
+ case R_STATUS:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: status is read only\n", __func__);
break;
- case IBEX_UART_RDATA:
+ case R_RDATA:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: rdata is read only\n", __func__);
break;
- case IBEX_UART_WDATA:
+ case R_WDATA:
uart_write_tx_fifo(s, (uint8_t *) &value, 1);
break;
- case IBEX_UART_FIFO_CTRL:
+ case R_FIFO_CTRL:
s->uart_fifo_ctrl = value;
- if (value & FIFO_CTRL_RXRST) {
+ if (value & R_FIFO_CTRL_RXRST_MASK) {
qemu_log_mask(LOG_UNIMP,
"%s: RX fifos are not supported\n", __func__);
}
- if (value & FIFO_CTRL_TXRST) {
+ if (value & R_FIFO_CTRL_TXRST_MASK) {
s->tx_level = 0;
}
break;
- case IBEX_UART_FIFO_STATUS:
+ case R_FIFO_STATUS:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: fifo_status is read only\n", __func__);
break;
- case IBEX_UART_OVRD:
+ case R_OVRD:
s->uart_ovrd = value;
qemu_log_mask(LOG_UNIMP,
"%s: ovrd is not supported\n", __func__);
break;
- case IBEX_UART_VAL:
+ case R_VAL:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: val is read only\n", __func__);
break;
- case IBEX_UART_TIMEOUT_CTRL:
+ case R_TIMEOUT_CTRL:
s->uart_timeout_ctrl = value;
qemu_log_mask(LOG_UNIMP,
"%s: timeout_ctrl is not supported\n", __func__);
@@ -409,7 +409,7 @@ static void fifo_trigger_update(void *opaque)
{
IbexUartState *s = opaque;
- if (s->uart_ctrl & UART_CTRL_TX_ENABLE) {
+ if (s->uart_ctrl & R_CTRL_TX_ENABLE_MASK) {
ibex_uart_xmit(NULL, G_IO_OUT, s);
}
}
diff --git a/include/hw/char/ibex_uart.h b/include/hw/char/ibex_uart.h
index 6d81051161..b6bd5a6700 100644
--- a/include/hw/char/ibex_uart.h
+++ b/include/hw/char/ibex_uart.h
@@ -26,50 +26,44 @@
#define HW_IBEX_UART_H
#include "hw/sysbus.h"
+#include "hw/registerfields.h"
#include "chardev/char-fe.h"
#include "qemu/timer.h"
-#define IBEX_UART_INTR_STATE 0x00
- #define INTR_STATE_TX_WATERMARK (1 << 0)
- #define INTR_STATE_RX_WATERMARK (1 << 1)
- #define INTR_STATE_TX_EMPTY (1 << 2)
- #define INTR_STATE_RX_OVERFLOW (1 << 3)
-#define IBEX_UART_INTR_ENABLE 0x04
-#define IBEX_UART_INTR_TEST 0x08
-
-#define IBEX_UART_CTRL 0x0c
- #define UART_CTRL_TX_ENABLE (1 << 0)
- #define UART_CTRL_RX_ENABLE (1 << 1)
- #define UART_CTRL_NF (1 << 2)
- #define UART_CTRL_SLPBK (1 << 4)
- #define UART_CTRL_LLPBK (1 << 5)
- #define UART_CTRL_PARITY_EN (1 << 6)
- #define UART_CTRL_PARITY_ODD (1 << 7)
- #define UART_CTRL_RXBLVL (3 << 8)
- #define UART_CTRL_NCO (0xFFFF << 16)
-
-#define IBEX_UART_STATUS 0x10
- #define UART_STATUS_TXFULL (1 << 0)
- #define UART_STATUS_RXFULL (1 << 1)
- #define UART_STATUS_TXEMPTY (1 << 2)
- #define UART_STATUS_RXIDLE (1 << 4)
- #define UART_STATUS_RXEMPTY (1 << 5)
-
-#define IBEX_UART_RDATA 0x14
-#define IBEX_UART_WDATA 0x18
-
-#define IBEX_UART_FIFO_CTRL 0x1c
- #define FIFO_CTRL_RXRST (1 << 0)
- #define FIFO_CTRL_TXRST (1 << 1)
- #define FIFO_CTRL_RXILVL (7 << 2)
- #define FIFO_CTRL_RXILVL_SHIFT (2)
- #define FIFO_CTRL_TXILVL (3 << 5)
- #define FIFO_CTRL_TXILVL_SHIFT (5)
-
-#define IBEX_UART_FIFO_STATUS 0x20
-#define IBEX_UART_OVRD 0x24
-#define IBEX_UART_VAL 0x28
-#define IBEX_UART_TIMEOUT_CTRL 0x2c
+REG32(INTR_STATE, 0x00)
+ FIELD(INTR_STATE, TX_WATERMARK, 0, 1)
+ FIELD(INTR_STATE, RX_WATERMARK, 1, 1)
+ FIELD(INTR_STATE, TX_EMPTY, 2, 1)
+ FIELD(INTR_STATE, RX_OVERFLOW, 3, 1)
+REG32(INTR_ENABLE, 0x04)
+REG32(INTR_TEST, 0x08)
+REG32(CTRL, 0x0C)
+ FIELD(CTRL, TX_ENABLE, 0, 1)
+ FIELD(CTRL, RX_ENABLE, 1, 1)
+ FIELD(CTRL, NF, 2, 1)
+ FIELD(CTRL, SLPBK, 4, 1)
+ FIELD(CTRL, LLPBK, 5, 1)
+ FIELD(CTRL, PARITY_EN, 6, 1)
+ FIELD(CTRL, PARITY_ODD, 7, 1)
+ FIELD(CTRL, RXBLVL, 8, 2)
+ FIELD(CTRL, NCO, 16, 16)
+REG32(STATUS, 0x10)
+ FIELD(STATUS, TXFULL, 0, 1)
+ FIELD(STATUS, RXFULL, 1, 1)
+ FIELD(STATUS, TXEMPTY, 2, 1)
+ FIELD(STATUS, RXIDLE, 4, 1)
+ FIELD(STATUS, RXEMPTY, 5, 1)
+REG32(RDATA, 0x14)
+REG32(WDATA, 0x18)
+REG32(FIFO_CTRL, 0x1c)
+ FIELD(FIFO_CTRL, RXRST, 0, 1)
+ FIELD(FIFO_CTRL, TXRST, 1, 1)
+ FIELD(FIFO_CTRL, RXILVL, 2, 3)
+ FIELD(FIFO_CTRL, TXILVL, 5, 2)
+REG32(FIFO_STATUS, 0x20)
+REG32(OVRD, 0x24)
+REG32(VAL, 0x28)
+REG32(TIMEOUT_CTRL, 0x2c)
#define IBEX_UART_TX_FIFO_SIZE 16
#define IBEX_UART_CLOCK 50000000 /* 50MHz clock */
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#staging
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |