[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[qemu-xen master] qcow2: Deprecate use of qemu-img amend to change backing file



commit bc5ee6da7122f6fe93ed07241a44315a331487e9
Author:     Eric Blake <eblake@xxxxxxxxxx>
AuthorDate: Mon Jul 6 15:39:51 2020 -0500
Commit:     Kevin Wolf <kwolf@xxxxxxxxxx>
CommitDate: Tue Jul 14 15:18:59 2020 +0200

    qcow2: Deprecate use of qemu-img amend to change backing file
    
    The use of 'qemu-img amend' to change qcow2 backing files is not
    tested very well.  In particular, our implementation has a bug where
    if a new backing file is provided without a format, then the prior
    format is blindly reused, even if this results in data corruption, but
    this is not caught by iotests.
    
    There are also situations where amending other options needs access to
    the original backing file (for example, on a downgrade to a v2 image,
    knowing whether a v3 zero cluster must be allocated or may be left
    unallocated depends on knowing whether the backing file already reads
    as zero), but the command line does not have a nice way to tell us
    both the backing file to use for opening the image as well as the
    backing file to install after the operation is complete.
    
    Even if we do allow changing the backing file, it is redundant with
    the existing ability to change backing files via 'qemu-img rebase -u'.
    It is time to deprecate this support (leaving the existing behavior
    intact, even if it is buggy), and at a point in the future, require
    the use of only 'qemu-img rebase' for adjusting backing chain
    relations, saving 'qemu-img amend' for changes unrelated to the
    backing chain.
    
    Signed-off-by: Eric Blake <eblake@xxxxxxxxxx>
    Message-Id: <20200706203954.341758-8-eblake@xxxxxxxxxx>
    Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx>
---
 block/qcow2.c              |  5 +++++
 docs/system/deprecated.rst | 12 ++++++++++++
 docs/tools/qemu-img.rst    |  4 ++++
 tests/qemu-iotests/061.out |  1 +
 tests/qemu-iotests/082.out |  2 ++
 5 files changed, 24 insertions(+)

diff --git a/block/qcow2.c b/block/qcow2.c
index ea33673c55..f3fc2707cd 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -5511,6 +5511,11 @@ static int qcow2_amend_options(BlockDriverState *bs, 
QemuOpts *opts,
     }
 
     if (backing_file || backing_format) {
+        if (g_strcmp0(backing_file, s->image_backing_file) ||
+            g_strcmp0(backing_format, s->image_backing_format)) {
+            warn_report("Deprecated use of amend to alter the backing file; "
+                        "use qemu-img rebase instead");
+        }
         ret = qcow2_change_backing_file(bs,
                     backing_file ?: s->image_backing_file,
                     backing_format ?: s->image_backing_format);
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index c014e049c3..c1f019b9d2 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -427,6 +427,18 @@ kernel in 2018, and has also been dropped from glibc.
 Related binaries
 ----------------
 
+qemu-img amend to adjust backing file (since 5.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''
+
+The use of ``qemu-img amend`` to modify the name or format of a qcow2
+backing image is deprecated; this functionality was never fully
+documented or tested, and interferes with other amend operations that
+need access to the original backing image (such as deciding whether a
+v3 zero cluster may be left unallocated when converting to a v2
+image).  Rather, any changes to the backing chain should be performed
+with ``qemu-img rebase -u`` either before or after the remaining
+changes being performed by amend, as appropriate.
+
 Backwards compatibility
 -----------------------
 
diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
index e33f5575e3..c35bd64822 100644
--- a/docs/tools/qemu-img.rst
+++ b/docs/tools/qemu-img.rst
@@ -258,6 +258,10 @@ Command description:
   Amends the image format specific *OPTIONS* for the image file
   *FILENAME*. Not all file formats support this operation.
 
+  The set of options that can be amended are dependent on the image
+  format, but note that amending the backing chain relationship should
+  instead be performed with ``qemu-img rebase``.
+
   --force allows some unsafe operations. Currently for -f luks, it allows to
   erase the last encryption key, and to overwrite an active encryption key.
 
diff --git a/tests/qemu-iotests/061.out b/tests/qemu-iotests/061.out
index b0f8befe30..44e3c624f9 100644
--- a/tests/qemu-iotests/061.out
+++ b/tests/qemu-iotests/061.out
@@ -370,6 +370,7 @@ wrote 131072/131072 bytes at offset 0
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 read 131072/131072 bytes at offset 0
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-img: warning: Deprecated use of amend to alter the backing file; use 
qemu-img rebase instead
 read 131072/131072 bytes at offset 0
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 No errors were found on the image.
diff --git a/tests/qemu-iotests/082.out b/tests/qemu-iotests/082.out
index f7b3d54b28..a38a26fc57 100644
--- a/tests/qemu-iotests/082.out
+++ b/tests/qemu-iotests/082.out
@@ -783,10 +783,12 @@ Amend options for 'qcow2':
   size=<size>            - Virtual disk size
 
 Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2
+qemu-img: warning: Deprecated use of amend to alter the backing file; use 
qemu-img rebase instead
 
 Testing: rebase -u -b  -f qcow2 TEST_DIR/t.qcow2
 
 Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2
+qemu-img: warning: Deprecated use of amend to alter the backing file; use 
qemu-img rebase instead
 
 Testing: rebase -u -b  -f qcow2 TEST_DIR/t.qcow2
 
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.