[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[qemu-xen master] qemu-img: Deprecate use of -b without -F



commit d9f059aa6cfccefaffa3532556e966df4a99ece2
Author:     Eric Blake <eblake@xxxxxxxxxx>
AuthorDate: Mon Jul 6 15:39:54 2020 -0500
Commit:     Kevin Wolf <kwolf@xxxxxxxxxx>
CommitDate: Tue Jul 14 15:24:05 2020 +0200

    qemu-img: Deprecate use of -b without -F
    
    Creating an image that requires format probing of the backing image is
    potentially unsafe (we've had several CVEs over the years based on
    probes leaking information to the guest on a subsequent boot, although
    these days tools like libvirt are aware of the issue enough to prevent
    the worst effects).  For example, if our probing algorithm ever
    changes, or if other tools like libvirt determine a different probe
    result than we do, then subsequent use of that backing file under a
    different format will present corrupted data to the guest.
    Fortunately, the worst effects occur only when the backing image is
    originally raw, and we at least prevent commit into a probed raw
    backing file that would change its probed type.
    
    Still, it is worth starting a deprecation clock so that future
    qemu-img can refuse to create backing chains that would rely on
    probing, to encourage clients to avoid unsafe practices.  Most
    warnings are intentionally emitted from bdrv_img_create() in the block
    layer, but qemu-img convert uses bdrv_create() which cannot emit its
    own warning without causing spurious warnings on other code paths.  In
    the end, all command-line image creation or backing file rewriting now
    performs a check.
    
    Furthermore, if we probe a backing file as non-raw, then it is safe to
    explicitly record that result (rather than relying on future probes);
    only where we probe a raw image do we care about further warnings to
    the user when using such an image (for example, commits into a
    probed-raw backing file are prevented), to help them improve their
    tooling.  But whether or not we make the probe results explicit, we
    still warn the user to remind them to upgrade their workflow to supply
    -F always.
    
    iotest 114 specifically wants to create an unsafe image for later
    amendment rather than defaulting to our new default of recording a
    probed format, so it needs an update.  While touching it, expand it to
    cover all of the various warnings enabled by this patch.  iotest 301
    also shows a change to qcow messages.
    
    Signed-off-by: Eric Blake <eblake@xxxxxxxxxx>
    Message-Id: <20200706203954.341758-11-eblake@xxxxxxxxxx>
    Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx>
---
 block.c                    | 27 ++++++++++++++++++++++++++-
 docs/system/deprecated.rst | 20 ++++++++++++++++++++
 qemu-img.c                 |  9 ++++++++-
 tests/qemu-iotests/114     | 14 ++++++++++++++
 tests/qemu-iotests/114.out |  9 +++++++++
 tests/qemu-iotests/301.out |  4 +++-
 6 files changed, 80 insertions(+), 3 deletions(-)

diff --git a/block.c b/block.c
index 4acfebf0e8..35a372df57 100644
--- a/block.c
+++ b/block.c
@@ -6139,6 +6139,26 @@ void bdrv_img_create(const char *filename, const char 
*fmt,
             error_append_hint(&local_err, "Could not open backing image.\n");
             goto out;
         } else {
+            if (!backing_fmt) {
+                warn_report("Deprecated use of backing file without explicit "
+                            "backing format (detected format of %s)",
+                            bs->drv->format_name);
+                if (bs->drv != &bdrv_raw) {
+                    /*
+                     * A probe of raw deserves the most attention:
+                     * leaving the backing format out of the image
+                     * will ensure bs->probed is set (ensuring we
+                     * don't accidentally commit into the backing
+                     * file), and allow more spots to warn the users
+                     * to fix their toolchain when opening this image
+                     * later.  For other images, we can safely record
+                     * the format that we probed.
+                     */
+                    backing_fmt = bs->drv->format_name;
+                    qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, backing_fmt,
+                                 NULL);
+                }
+            }
             if (size == -1) {
                 /* Opened BS, have no size */
                 size = bdrv_getlength(bs);
@@ -6152,7 +6172,12 @@ void bdrv_img_create(const char *filename, const char 
*fmt,
             }
             bdrv_unref(bs);
         }
-    } /* (backing_file && !(flags & BDRV_O_NO_BACKING)) */
+        /* (backing_file && !(flags & BDRV_O_NO_BACKING)) */
+    } else if (backing_file && !backing_fmt) {
+        warn_report("Deprecated use of unopened backing file without "
+                    "explicit backing format, use of this image requires "
+                    "potentially unsafe format probing");
+    }
 
     if (size == -1) {
         error_setg(errp, "Image creation needs a size parameter");
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index c1f019b9d2..971b65be75 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -439,6 +439,26 @@ image).  Rather, any changes to the backing chain should 
be performed
 with ``qemu-img rebase -u`` either before or after the remaining
 changes being performed by amend, as appropriate.
 
+qemu-img backing file without format (since 5.1)
+''''''''''''''''''''''''''''''''''''''''''''''''
+
+The use of ``qemu-img create``, ``qemu-img rebase``, or ``qemu-img
+convert`` to create or modify an image that depends on a backing file
+now recommends that an explicit backing format be provided.  This is
+for safety: if QEMU probes a different format than what you thought,
+the data presented to the guest will be corrupt; similarly, presenting
+a raw image to a guest allows a potential security exploit if a future
+probe sees a non-raw image based on guest writes.
+
+To avoid the warning message, or even future refusal to create an
+unsafe image, you must pass ``-o backing_fmt=`` (or the shorthand
+``-F`` during create) to specify the intended backing format.  You may
+use ``qemu-img rebase -u`` to retroactively add a backing format to an
+existing image.  However, be aware that there are already potential
+security risks to blindly using ``qemu-img info`` to probe the format
+of an untrusted backing image, when deciding what format to add into
+an existing image.
+
 Backwards compatibility
 -----------------------
 
diff --git a/qemu-img.c b/qemu-img.c
index a6df64a949..efb6ca139e 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -2517,6 +2517,13 @@ static int img_convert(int argc, char **argv)
         goto out;
     }
 
+    if (out_baseimg_param) {
+        if (!qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT)) {
+            warn_report("Deprecated use of backing file without explicit "
+                        "backing format");
+        }
+    }
+
     /* Check if compression is supported */
     if (s.compressed) {
         bool encryption =
@@ -3797,7 +3804,7 @@ static int img_rebase(int argc, char **argv)
      * doesn't change when we switch the backing file.
      */
     if (out_baseimg && *out_baseimg) {
-        ret = bdrv_change_backing_file(bs, out_baseimg, out_basefmt, false);
+        ret = bdrv_change_backing_file(bs, out_baseimg, out_basefmt, true);
     } else {
         ret = bdrv_change_backing_file(bs, NULL, NULL, false);
     }
diff --git a/tests/qemu-iotests/114 b/tests/qemu-iotests/114
index 26104fff6c..5a7b0a4998 100755
--- a/tests/qemu-iotests/114
+++ b/tests/qemu-iotests/114
@@ -39,12 +39,21 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
 _supported_fmt qcow2
 _supported_proto generic
 _unsupported_proto vxhs
+# At least OpenBSD doesn't seem to have truncate
+_supported_os Linux
 # qcow2.py does not work too well with external data files
 _unsupported_imgopts data_file
 
+# Intentionally specify backing file without backing format; demonstrate
+# the difference in warning messages when backing file could be probed.
+# Note that only a non-raw probe result will affect the resulting image.
+truncate -s $((64 * 1024 * 1024)) "$TEST_IMG.orig"
+_make_test_img -b "$TEST_IMG.orig" 64M
 
 TEST_IMG="$TEST_IMG.base" _make_test_img 64M
+$QEMU_IMG convert -O qcow2 -B "$TEST_IMG.orig" "$TEST_IMG.orig" "$TEST_IMG"
 _make_test_img -b "$TEST_IMG.base" 64M
+_make_test_img -u -b "$TEST_IMG.base" 64M
 
 # Set an invalid backing file format
 $PYTHON qcow2.py "$TEST_IMG" add-header-ext 0xE2792ACA "foo"
@@ -55,6 +64,11 @@ _img_info
 $QEMU_IO -c "open $TEST_IMG" -c "read 0 4k" 2>&1 | _filter_qemu_io | 
_filter_testdir
 $QEMU_IO -c "open -o backing.driver=$IMGFMT $TEST_IMG" -c "read 0 4k" | 
_filter_qemu_io
 
+# Rebase the image, to show that omitting backing format triggers a warning,
+# but probing now lets us use the backing file.
+$QEMU_IMG rebase -u -b "$TEST_IMG.base" "$TEST_IMG"
+$QEMU_IO -c "open $TEST_IMG" -c "read 0 4k" 2>&1 | _filter_qemu_io | 
_filter_testdir
+
 # success, all done
 echo '*** done'
 rm -f $seq.full
diff --git a/tests/qemu-iotests/114.out b/tests/qemu-iotests/114.out
index 67adef37a4..0a37d20c82 100644
--- a/tests/qemu-iotests/114.out
+++ b/tests/qemu-iotests/114.out
@@ -1,5 +1,11 @@
 QA output created by 114
+qemu-img: warning: Deprecated use of backing file without explicit backing 
format (detected format of raw)
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 
backing_file=TEST_DIR/t.IMGFMT.orig
 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
+qemu-img: warning: Deprecated use of backing file without explicit backing 
format
+qemu-img: warning: Deprecated use of backing file without explicit backing 
format (detected format of IMGFMT)
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 
backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
+qemu-img: warning: Deprecated use of unopened backing file without explicit 
backing format, use of this image requires potentially unsafe format probing
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 
backing_file=TEST_DIR/t.IMGFMT.base
 image: TEST_DIR/t.IMGFMT
 file format: IMGFMT
@@ -11,4 +17,7 @@ qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 
backing file: Unknow
 no file open, try 'help open'
 read 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-img: warning: Deprecated use of backing file without explicit backing 
format, use of this image requires potentially unsafe format probing
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 *** done
diff --git a/tests/qemu-iotests/301.out b/tests/qemu-iotests/301.out
index 281a16d87a..9004dad639 100644
--- a/tests/qemu-iotests/301.out
+++ b/tests/qemu-iotests/301.out
@@ -2,7 +2,8 @@ QA output created by 301
 
 == qcow backed by qcow ==
 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=33554432
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 
backing_file=TEST_DIR/t.IMGFMT.base
+qemu-img: warning: Deprecated use of backing file without explicit backing 
format (detected format of IMGFMT)
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 
backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
 image: TEST_DIR/t.IMGFMT
 file format: IMGFMT
 virtual size: 32 MiB (33554432 bytes)
@@ -35,6 +36,7 @@ cluster_size: 512
 backing file: TEST_DIR/t.IMGFMT.base
 
 == qcow backed by raw ==
+qemu-img: warning: Deprecated use of backing file without explicit backing 
format (detected format of raw)
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 
backing_file=TEST_DIR/t.IMGFMT.base
 image: TEST_DIR/t.IMGFMT
 file format: IMGFMT
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.