|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [qemu-xen master] Remove VXHS block device
commit a08464521ccb302a24c7785f50ce32473904136c
Author: Marc-André Lureau <marcandre.lureau@xxxxxxxxxx>
AuthorDate: Sat Jul 11 10:59:26 2020 +0400
Commit: Kevin Wolf <kwolf@xxxxxxxxxx>
CommitDate: Fri Jul 17 14:20:57 2020 +0200
Remove VXHS block device
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@xxxxxxxxxx>
Reviewed-by: Markus Armbruster <armbru@xxxxxxxxxx>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@xxxxxxxxxx>
Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx>
---
block/Makefile.objs | 2 -
block/trace-events | 17 --
block/vxhs.c | 587 ---------------------------------------
configure | 39 ---
docs/system/deprecated.rst | 8 +
qapi/block-core.json | 22 +-
tests/qemu-iotests/017 | 1 -
tests/qemu-iotests/029 | 1 -
tests/qemu-iotests/073 | 1 -
tests/qemu-iotests/114 | 1 -
tests/qemu-iotests/130 | 1 -
tests/qemu-iotests/134 | 1 -
tests/qemu-iotests/156 | 1 -
tests/qemu-iotests/158 | 1 -
tests/qemu-iotests/282 | 1 -
tests/qemu-iotests/check | 10 -
tests/qemu-iotests/common.filter | 1 -
tests/qemu-iotests/common.rc | 33 ---
18 files changed, 10 insertions(+), 718 deletions(-)
diff --git a/block/Makefile.objs b/block/Makefile.objs
index 577e578bc2..19c6f371c9 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -31,7 +31,6 @@ block-obj-$(CONFIG_LIBNFS) += nfs.o
block-obj-$(CONFIG_CURL) += curl.o
block-obj-$(CONFIG_RBD) += rbd.o
block-obj-$(CONFIG_GLUSTERFS) += gluster.o
-block-obj-$(CONFIG_VXHS) += vxhs.o
block-obj-$(CONFIG_LIBSSH) += ssh.o
block-obj-y += accounting.o dirty-bitmap.o
block-obj-y += write-threshold.o
@@ -61,7 +60,6 @@ rbd.o-cflags := $(RBD_CFLAGS)
rbd.o-libs := $(RBD_LIBS)
gluster.o-cflags := $(GLUSTERFS_CFLAGS)
gluster.o-libs := $(GLUSTERFS_LIBS)
-vxhs.o-libs := $(VXHS_LIBS)
ssh.o-cflags := $(LIBSSH_CFLAGS)
ssh.o-libs := $(LIBSSH_LIBS)
block-obj-dmg-bz2-$(CONFIG_BZIP2) += dmg-bz2.o
diff --git a/block/trace-events b/block/trace-events
index dbe76a7613..d3533ca896 100644
--- a/block/trace-events
+++ b/block/trace-events
@@ -136,23 +136,6 @@ qed_aio_write_prefill(void *s, void *acb, uint64_t start,
size_t len, uint64_t o
qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len,
uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len)
"s %p acb %p ret %d offset %"PRIu64" len %zu"
-# vxhs.c
-vxhs_iio_callback(int error) "ctx is NULL: error %d"
-vxhs_iio_callback_chnfail(int err, int error) "QNIO channel failed, no i/o %d,
%d"
-vxhs_iio_callback_unknwn(int opcode, int err) "unexpected opcode %d, errno %d"
-vxhs_aio_rw_invalid(int req) "Invalid I/O request iodir %d"
-vxhs_aio_rw_ioerr(char *guid, int iodir, uint64_t size, uint64_t off, void
*acb, int ret, int err) "IO ERROR (vDisk %s) FOR : Read/Write = %d size =
%"PRIu64" offset = %"PRIu64" ACB = %p. Error = %d, errno = %d"
-vxhs_get_vdisk_stat_err(char *guid, int ret, int err) "vDisk (%s) stat ioctl
failed, ret = %d, errno = %d"
-vxhs_get_vdisk_stat(char *vdisk_guid, uint64_t vdisk_size) "vDisk %s stat
ioctl returned size %"PRIu64
-vxhs_complete_aio(void *acb, uint64_t ret) "aio failed acb %p ret %"PRIu64
-vxhs_parse_uri_filename(const char *filename) "URI passed via
bdrv_parse_filename %s"
-vxhs_open_vdiskid(const char *vdisk_id) "Opening vdisk-id %s"
-vxhs_open_hostinfo(char *of_vsa_addr, int port) "Adding host %s:%d to
BDRVVXHSState"
-vxhs_open_iio_open(const char *host) "Failed to connect to storage agent on
host %s"
-vxhs_parse_uri_hostinfo(char *host, int port) "Host: IP %s, Port %d"
-vxhs_close(char *vdisk_guid) "Closing vdisk %s"
-vxhs_get_creds(const char *cacert, const char *client_key, const char
*client_cert) "cacert %s, client_key %s, client_cert %s"
-
# nvme.c
nvme_kick(void *s, int queue) "s %p queue %d"
nvme_dma_flush_queue_wait(void *s) "s %p"
diff --git a/block/vxhs.c b/block/vxhs.c
deleted file mode 100644
index dc0e254730..0000000000
--- a/block/vxhs.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * QEMU Block driver for Veritas HyperScale (VxHS)
- *
- * Copyright (c) 2017 Veritas Technologies LLC.
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- *
- */
-
-#include "qemu/osdep.h"
-#include <qnio/qnio_api.h>
-#include <sys/param.h>
-#include "block/block_int.h"
-#include "block/qdict.h"
-#include "qapi/qmp/qerror.h"
-#include "qapi/qmp/qdict.h"
-#include "qapi/qmp/qstring.h"
-#include "trace.h"
-#include "qemu/module.h"
-#include "qemu/uri.h"
-#include "qapi/error.h"
-#include "qemu/uuid.h"
-#include "crypto/tlscredsx509.h"
-#include "sysemu/replay.h"
-
-#define VXHS_OPT_FILENAME "filename"
-#define VXHS_OPT_VDISK_ID "vdisk-id"
-#define VXHS_OPT_SERVER "server"
-#define VXHS_OPT_HOST "host"
-#define VXHS_OPT_PORT "port"
-
-/* Only accessed under QEMU global mutex */
-static uint32_t vxhs_ref;
-
-typedef enum {
- VDISK_AIO_READ,
- VDISK_AIO_WRITE,
-} VDISKAIOCmd;
-
-/*
- * HyperScale AIO callbacks structure
- */
-typedef struct VXHSAIOCB {
- BlockAIOCB common;
- int err;
-} VXHSAIOCB;
-
-typedef struct VXHSvDiskHostsInfo {
- void *dev_handle; /* Device handle */
- char *host; /* Host name or IP */
- int port; /* Host's port number */
-} VXHSvDiskHostsInfo;
-
-/*
- * Structure per vDisk maintained for state
- */
-typedef struct BDRVVXHSState {
- VXHSvDiskHostsInfo vdisk_hostinfo; /* Per host info */
- char *vdisk_guid;
- char *tlscredsid; /* tlscredsid */
-} BDRVVXHSState;
-
-static void vxhs_complete_aio_bh(void *opaque)
-{
- VXHSAIOCB *acb = opaque;
- BlockCompletionFunc *cb = acb->common.cb;
- void *cb_opaque = acb->common.opaque;
- int ret = 0;
-
- if (acb->err != 0) {
- trace_vxhs_complete_aio(acb, acb->err);
- ret = (-EIO);
- }
-
- qemu_aio_unref(acb);
- cb(cb_opaque, ret);
-}
-
-/*
- * Called from a libqnio thread
- */
-static void vxhs_iio_callback(void *ctx, uint32_t opcode, uint32_t error)
-{
- VXHSAIOCB *acb = NULL;
-
- switch (opcode) {
- case IRP_READ_REQUEST:
- case IRP_WRITE_REQUEST:
-
- /*
- * ctx is VXHSAIOCB*
- * ctx is NULL if error is QNIOERROR_CHANNEL_HUP
- */
- if (ctx) {
- acb = ctx;
- } else {
- trace_vxhs_iio_callback(error);
- goto out;
- }
-
- if (error) {
- if (!acb->err) {
- acb->err = error;
- }
- trace_vxhs_iio_callback(error);
- }
-
- replay_bh_schedule_oneshot_event(bdrv_get_aio_context(acb->common.bs),
- vxhs_complete_aio_bh, acb);
- break;
-
- default:
- if (error == QNIOERROR_HUP) {
- /*
- * Channel failed, spontaneous notification,
- * not in response to I/O
- */
- trace_vxhs_iio_callback_chnfail(error, errno);
- } else {
- trace_vxhs_iio_callback_unknwn(opcode, error);
- }
- break;
- }
-out:
- return;
-}
-
-static QemuOptsList runtime_opts = {
- .name = "vxhs",
- .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
- .desc = {
- {
- .name = VXHS_OPT_FILENAME,
- .type = QEMU_OPT_STRING,
- .help = "URI to the Veritas HyperScale image",
- },
- {
- .name = VXHS_OPT_VDISK_ID,
- .type = QEMU_OPT_STRING,
- .help = "UUID of the VxHS vdisk",
- },
- {
- .name = "tls-creds",
- .type = QEMU_OPT_STRING,
- .help = "ID of the TLS/SSL credentials to use",
- },
- { /* end of list */ }
- },
-};
-
-static QemuOptsList runtime_tcp_opts = {
- .name = "vxhs_tcp",
- .head = QTAILQ_HEAD_INITIALIZER(runtime_tcp_opts.head),
- .desc = {
- {
- .name = VXHS_OPT_HOST,
- .type = QEMU_OPT_STRING,
- .help = "host address (ipv4 addresses)",
- },
- {
- .name = VXHS_OPT_PORT,
- .type = QEMU_OPT_NUMBER,
- .help = "port number on which VxHSD is listening (default 9999)",
- .def_value_str = "9999"
- },
- { /* end of list */ }
- },
-};
-
-/*
- * Parse incoming URI and populate *options with the host
- * and device information
- */
-static int vxhs_parse_uri(const char *filename, QDict *options)
-{
- URI *uri = NULL;
- char *port;
- int ret = 0;
-
- trace_vxhs_parse_uri_filename(filename);
- uri = uri_parse(filename);
- if (!uri || !uri->server || !uri->path) {
- uri_free(uri);
- return -EINVAL;
- }
-
- qdict_put_str(options, VXHS_OPT_SERVER ".host", uri->server);
-
- if (uri->port) {
- port = g_strdup_printf("%d", uri->port);
- qdict_put_str(options, VXHS_OPT_SERVER ".port", port);
- g_free(port);
- }
-
- qdict_put_str(options, "vdisk-id", uri->path);
-
- trace_vxhs_parse_uri_hostinfo(uri->server, uri->port);
- uri_free(uri);
-
- return ret;
-}
-
-static void vxhs_parse_filename(const char *filename, QDict *options,
- Error **errp)
-{
- if (qdict_haskey(options, "vdisk-id") || qdict_haskey(options, "server")) {
- error_setg(errp, "vdisk-id/server and a file name may not be specified
"
- "at the same time");
- return;
- }
-
- if (strstr(filename, "://")) {
- int ret = vxhs_parse_uri(filename, options);
- if (ret < 0) {
- error_setg(errp, "Invalid URI. URI should be of the form "
- " vxhs://<host_ip>:<port>/<vdisk-id>");
- }
- }
-}
-
-static void vxhs_refresh_limits(BlockDriverState *bs, Error **errp)
-{
- /* XXX Does VXHS support AIO on less than 512-byte alignment? */
- bs->bl.request_alignment = 512;
-}
-
-static int vxhs_init_and_ref(void)
-{
- if (vxhs_ref++ == 0) {
- if (iio_init(QNIO_VERSION, vxhs_iio_callback)) {
- return -ENODEV;
- }
- }
- return 0;
-}
-
-static void vxhs_unref(void)
-{
- if (--vxhs_ref == 0) {
- iio_fini();
- }
-}
-
-static void vxhs_get_tls_creds(const char *id, char **cacert,
- char **key, char **cert, Error **errp)
-{
- Object *obj;
- QCryptoTLSCreds *creds;
- QCryptoTLSCredsX509 *creds_x509;
-
- obj = object_resolve_path_component(
- object_get_objects_root(), id);
-
- if (!obj) {
- error_setg(errp, "No TLS credentials with id '%s'",
- id);
- return;
- }
-
- creds_x509 = (QCryptoTLSCredsX509 *)
- object_dynamic_cast(obj, TYPE_QCRYPTO_TLS_CREDS_X509);
-
- if (!creds_x509) {
- error_setg(errp, "Object with id '%s' is not TLS credentials",
- id);
- return;
- }
-
- creds = &creds_x509->parent_obj;
-
- if (creds->endpoint != QCRYPTO_TLS_CREDS_ENDPOINT_CLIENT) {
- error_setg(errp,
- "Expecting TLS credentials with a client endpoint");
- return;
- }
-
- /*
- * Get the cacert, client_cert and client_key file names.
- */
- if (!creds->dir) {
- error_setg(errp, "TLS object missing 'dir' property value");
- return;
- }
-
- *cacert = g_strdup_printf("%s/%s", creds->dir,
- QCRYPTO_TLS_CREDS_X509_CA_CERT);
- *cert = g_strdup_printf("%s/%s", creds->dir,
- QCRYPTO_TLS_CREDS_X509_CLIENT_CERT);
- *key = g_strdup_printf("%s/%s", creds->dir,
- QCRYPTO_TLS_CREDS_X509_CLIENT_KEY);
-}
-
-static int vxhs_open(BlockDriverState *bs, QDict *options,
- int bdrv_flags, Error **errp)
-{
- BDRVVXHSState *s = bs->opaque;
- void *dev_handlep;
- QDict *backing_options = NULL;
- QemuOpts *opts = NULL;
- QemuOpts *tcp_opts = NULL;
- char *of_vsa_addr = NULL;
- Error *local_err = NULL;
- const char *vdisk_id_opt;
- const char *server_host_opt;
- int ret = 0;
- char *cacert = NULL;
- char *client_key = NULL;
- char *client_cert = NULL;
-
- ret = vxhs_init_and_ref();
- if (ret < 0) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Create opts info from runtime_opts and runtime_tcp_opts list */
- opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
- tcp_opts = qemu_opts_create(&runtime_tcp_opts, NULL, 0, &error_abort);
-
- if (!qemu_opts_absorb_qdict(opts, options, errp)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* vdisk-id is the disk UUID */
- vdisk_id_opt = qemu_opt_get(opts, VXHS_OPT_VDISK_ID);
- if (!vdisk_id_opt) {
- error_setg(errp, QERR_MISSING_PARAMETER, VXHS_OPT_VDISK_ID);
- ret = -EINVAL;
- goto out;
- }
-
- /* vdisk-id may contain a leading '/' */
- if (strlen(vdisk_id_opt) > UUID_FMT_LEN + 1) {
- error_setg(errp, "vdisk-id cannot be more than %d characters",
- UUID_FMT_LEN);
- ret = -EINVAL;
- goto out;
- }
-
- s->vdisk_guid = g_strdup(vdisk_id_opt);
- trace_vxhs_open_vdiskid(vdisk_id_opt);
-
- /* get the 'server.' arguments */
- qdict_extract_subqdict(options, &backing_options, VXHS_OPT_SERVER".");
-
- if (!qemu_opts_absorb_qdict(tcp_opts, backing_options, errp)) {
- ret = -EINVAL;
- goto out;
- }
-
- server_host_opt = qemu_opt_get(tcp_opts, VXHS_OPT_HOST);
- if (!server_host_opt) {
- error_setg(errp, QERR_MISSING_PARAMETER,
- VXHS_OPT_SERVER"."VXHS_OPT_HOST);
- ret = -EINVAL;
- goto out;
- }
-
- if (strlen(server_host_opt) > MAXHOSTNAMELEN) {
- error_setg(errp, "server.host cannot be more than %d characters",
- MAXHOSTNAMELEN);
- ret = -EINVAL;
- goto out;
- }
-
- /* check if we got tls-creds via the --object argument */
- s->tlscredsid = g_strdup(qemu_opt_get(opts, "tls-creds"));
- if (s->tlscredsid) {
- vxhs_get_tls_creds(s->tlscredsid, &cacert, &client_key,
- &client_cert, &local_err);
- if (local_err != NULL) {
- ret = -EINVAL;
- goto out;
- }
- trace_vxhs_get_creds(cacert, client_key, client_cert);
- }
-
- s->vdisk_hostinfo.host = g_strdup(server_host_opt);
- s->vdisk_hostinfo.port = g_ascii_strtoll(qemu_opt_get(tcp_opts,
- VXHS_OPT_PORT),
- NULL, 0);
-
- trace_vxhs_open_hostinfo(s->vdisk_hostinfo.host,
- s->vdisk_hostinfo.port);
-
- of_vsa_addr = g_strdup_printf("of://%s:%d",
- s->vdisk_hostinfo.host,
- s->vdisk_hostinfo.port);
-
- /*
- * Open qnio channel to storage agent if not opened before
- */
- dev_handlep = iio_open(of_vsa_addr, s->vdisk_guid, 0,
- cacert, client_key, client_cert);
- if (dev_handlep == NULL) {
- trace_vxhs_open_iio_open(of_vsa_addr);
- ret = -ENODEV;
- goto out;
- }
- s->vdisk_hostinfo.dev_handle = dev_handlep;
-
-out:
- g_free(of_vsa_addr);
- qobject_unref(backing_options);
- qemu_opts_del(tcp_opts);
- qemu_opts_del(opts);
- g_free(cacert);
- g_free(client_key);
- g_free(client_cert);
-
- if (ret < 0) {
- vxhs_unref();
- g_free(s->vdisk_hostinfo.host);
- g_free(s->vdisk_guid);
- g_free(s->tlscredsid);
- s->vdisk_guid = NULL;
- }
-
- return ret;
-}
-
-static const AIOCBInfo vxhs_aiocb_info = {
- .aiocb_size = sizeof(VXHSAIOCB)
-};
-
-/*
- * This allocates QEMU-VXHS callback for each IO
- * and is passed to QNIO. When QNIO completes the work,
- * it will be passed back through the callback.
- */
-static BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs, uint64_t offset,
- QEMUIOVector *qiov, uint64_t size,
- BlockCompletionFunc *cb, void *opaque,
- VDISKAIOCmd iodir)
-{
- VXHSAIOCB *acb = NULL;
- BDRVVXHSState *s = bs->opaque;
- int iio_flags = 0;
- int ret = 0;
- void *dev_handle = s->vdisk_hostinfo.dev_handle;
-
- acb = qemu_aio_get(&vxhs_aiocb_info, bs, cb, opaque);
-
- /*
- * Initialize VXHSAIOCB.
- */
- acb->err = 0;
-
- iio_flags = IIO_FLAG_ASYNC;
-
- switch (iodir) {
- case VDISK_AIO_WRITE:
- ret = iio_writev(dev_handle, acb, qiov->iov, qiov->niov,
- offset, size, iio_flags);
- break;
- case VDISK_AIO_READ:
- ret = iio_readv(dev_handle, acb, qiov->iov, qiov->niov,
- offset, size, iio_flags);
- break;
- default:
- trace_vxhs_aio_rw_invalid(iodir);
- goto errout;
- }
-
- if (ret != 0) {
- trace_vxhs_aio_rw_ioerr(s->vdisk_guid, iodir, size, offset,
- acb, ret, errno);
- goto errout;
- }
- return &acb->common;
-
-errout:
- qemu_aio_unref(acb);
- return NULL;
-}
-
-static BlockAIOCB *vxhs_aio_preadv(BlockDriverState *bs,
- uint64_t offset, uint64_t bytes,
- QEMUIOVector *qiov, int flags,
- BlockCompletionFunc *cb, void *opaque)
-{
- return vxhs_aio_rw(bs, offset, qiov, bytes, cb, opaque, VDISK_AIO_READ);
-}
-
-static BlockAIOCB *vxhs_aio_pwritev(BlockDriverState *bs,
- uint64_t offset, uint64_t bytes,
- QEMUIOVector *qiov, int flags,
- BlockCompletionFunc *cb, void *opaque)
-{
- return vxhs_aio_rw(bs, offset, qiov, bytes, cb, opaque, VDISK_AIO_WRITE);
-}
-
-static void vxhs_close(BlockDriverState *bs)
-{
- BDRVVXHSState *s = bs->opaque;
-
- trace_vxhs_close(s->vdisk_guid);
-
- g_free(s->vdisk_guid);
- s->vdisk_guid = NULL;
-
- /*
- * Close vDisk device
- */
- if (s->vdisk_hostinfo.dev_handle) {
- iio_close(s->vdisk_hostinfo.dev_handle);
- s->vdisk_hostinfo.dev_handle = NULL;
- }
-
- vxhs_unref();
-
- /*
- * Free the dynamically allocated host string etc
- */
- g_free(s->vdisk_hostinfo.host);
- g_free(s->tlscredsid);
- s->tlscredsid = NULL;
- s->vdisk_hostinfo.host = NULL;
- s->vdisk_hostinfo.port = 0;
-}
-
-static int64_t vxhs_get_vdisk_stat(BDRVVXHSState *s)
-{
- int64_t vdisk_size = -1;
- int ret = 0;
- void *dev_handle = s->vdisk_hostinfo.dev_handle;
-
- ret = iio_ioctl(dev_handle, IOR_VDISK_STAT, &vdisk_size, 0);
- if (ret < 0) {
- trace_vxhs_get_vdisk_stat_err(s->vdisk_guid, ret, errno);
- return -EIO;
- }
-
- trace_vxhs_get_vdisk_stat(s->vdisk_guid, vdisk_size);
- return vdisk_size;
-}
-
-/*
- * Returns the size of vDisk in bytes. This is required
- * by QEMU block upper block layer so that it is visible
- * to guest.
- */
-static int64_t vxhs_getlength(BlockDriverState *bs)
-{
- BDRVVXHSState *s = bs->opaque;
- int64_t vdisk_size;
-
- vdisk_size = vxhs_get_vdisk_stat(s);
- if (vdisk_size < 0) {
- return -EIO;
- }
-
- return vdisk_size;
-}
-
-static const char *const vxhs_strong_runtime_opts[] = {
- VXHS_OPT_VDISK_ID,
- "tls-creds",
- VXHS_OPT_HOST,
- VXHS_OPT_PORT,
- VXHS_OPT_SERVER".",
-
- NULL
-};
-
-static BlockDriver bdrv_vxhs = {
- .format_name = "vxhs",
- .protocol_name = "vxhs",
- .instance_size = sizeof(BDRVVXHSState),
- .bdrv_file_open = vxhs_open,
- .bdrv_parse_filename = vxhs_parse_filename,
- .bdrv_refresh_limits = vxhs_refresh_limits,
- .bdrv_close = vxhs_close,
- .bdrv_getlength = vxhs_getlength,
- .bdrv_aio_preadv = vxhs_aio_preadv,
- .bdrv_aio_pwritev = vxhs_aio_pwritev,
- .strong_runtime_opts = vxhs_strong_runtime_opts,
-};
-
-static void bdrv_vxhs_init(void)
-{
- bdrv_register(&bdrv_vxhs);
-}
-
-block_init(bdrv_vxhs_init);
diff --git a/configure b/configure
index b751c853f5..8227962b45 100755
--- a/configure
+++ b/configure
@@ -501,7 +501,6 @@ numa=""
tcmalloc="no"
jemalloc="no"
replication="yes"
-vxhs=""
bochs="yes"
cloop="yes"
dmg="yes"
@@ -1541,10 +1540,6 @@ for opt do
;;
--enable-replication) replication="yes"
;;
- --disable-vxhs) vxhs="no"
- ;;
- --enable-vxhs) vxhs="yes"
- ;;
--disable-bochs) bochs="no"
;;
--enable-bochs) bochs="yes"
@@ -1932,7 +1927,6 @@ disabled with --disable-FEATURE, default is enabled if
available:
xfsctl xfsctl support
qom-cast-debug cast debugging support
tools build qemu-io, qemu-nbd and qemu-img tools
- vxhs Veritas HyperScale vDisk backend support
bochs bochs image format support
cloop cloop image format support
dmg dmg image format support
@@ -6249,33 +6243,6 @@ if compile_prog "" "" ; then
have_sysmacros=yes
fi
-##########################################
-# Veritas HyperScale block driver VxHS
-# Check if libvxhs is installed
-
-if test "$vxhs" != "no" ; then
- cat > $TMPC <<EOF
-#include <stdint.h>
-#include <qnio/qnio_api.h>
-
-void *vxhs_callback;
-
-int main(void) {
- iio_init(QNIO_VERSION, vxhs_callback);
- return 0;
-}
-EOF
- vxhs_libs="-lvxhs -lssl"
- if compile_prog "" "$vxhs_libs" ; then
- vxhs=yes
- else
- if test "$vxhs" = "yes" ; then
- feature_not_found "vxhs block device" "Install libvxhs See github"
- fi
- vxhs=no
- fi
-fi
-
##########################################
# check for _Static_assert()
@@ -7033,7 +7000,6 @@ echo "jemalloc support $jemalloc"
echo "avx2 optimization $avx2_opt"
echo "avx512f optimization $avx512f_opt"
echo "replication support $replication"
-echo "VxHS block device $vxhs"
echo "bochs support $bochs"
echo "cloop support $cloop"
echo "dmg support $dmg"
@@ -7884,11 +7850,6 @@ elif test "$pthread_setname_np_wo_tid" = "yes" ; then
echo "CONFIG_PTHREAD_SETNAME_NP_WO_TID=y" >> $config_host_mak
fi
-if test "$vxhs" = "yes" ; then
- echo "CONFIG_VXHS=y" >> $config_host_mak
- echo "VXHS_LIBS=$vxhs_libs" >> $config_host_mak
-fi
-
if test "$libpmem" = "yes" ; then
echo "CONFIG_LIBPMEM=y" >> $config_host_mak
fi
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index 971b65be75..851dbdeb8a 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -618,3 +618,11 @@ to achieve the same fake NUMA effect or a properly
configured
New machine versions (since 5.1) will not accept the option but it will still
work with old machine types. User can check the QAPI schema to see if the
legacy
option is supported by looking at MachineInfo::numa-mem-supported property.
+
+Block devices
+-------------
+
+VXHS backend (removed in 5.1)
+'''''''''''''''''''''''''''''
+
+The VXHS code does not compile since v2.12.0. It was removed in 5.1.
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 463ffd83da..ab7bf3c612 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2790,7 +2790,6 @@
#
# Drivers that are supported in block device operations.
#
-# @vxhs: Since 2.10
# @throttle: Since 2.11
# @nvme: Since 2.12
# @copy-on-read: Since 3.0
@@ -2808,7 +2807,7 @@
'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
{ 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
'sheepdog',
- 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat', 'vxhs' ]
}
+ 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
##
# @BlockdevOptionsFile:
@@ -3895,22 +3894,6 @@
'base': 'BlockdevOptionsGenericFormat',
'data': { '*offset': 'int', '*size': 'int' } }
-##
-# @BlockdevOptionsVxHS:
-#
-# Driver specific block device options for VxHS
-#
-# @vdisk-id: UUID of VxHS volume
-# @server: vxhs server IP, port
-# @tls-creds: TLS credentials ID
-#
-# Since: 2.10
-##
-{ 'struct': 'BlockdevOptionsVxHS',
- 'data': { 'vdisk-id': 'str',
- 'server': 'InetSocketAddressBase',
- '*tls-creds': 'str' } }
-
##
# @BlockdevOptionsThrottle:
#
@@ -4010,8 +3993,7 @@
'vhdx': 'BlockdevOptionsGenericFormat',
'vmdk': 'BlockdevOptionsGenericCOWFormat',
'vpc': 'BlockdevOptionsGenericFormat',
- 'vvfat': 'BlockdevOptionsVVFAT',
- 'vxhs': 'BlockdevOptionsVxHS'
+ 'vvfat': 'BlockdevOptionsVVFAT'
} }
##
diff --git a/tests/qemu-iotests/017 b/tests/qemu-iotests/017
index 585512bb29..3413e34f27 100755
--- a/tests/qemu-iotests/017
+++ b/tests/qemu-iotests/017
@@ -40,7 +40,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
# Any format supporting backing files
_supported_fmt qcow qcow2 vmdk qed
_supported_proto generic
-_unsupported_proto vxhs
_unsupported_imgopts "subformat=monolithicFlat" "subformat=twoGbMaxExtentFlat"
\
"subformat=streamOptimized"
diff --git a/tests/qemu-iotests/029 b/tests/qemu-iotests/029
index 2161a4b87a..61d78c00a4 100755
--- a/tests/qemu-iotests/029
+++ b/tests/qemu-iotests/029
@@ -41,7 +41,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
# Any format supporting intenal snapshots
_supported_fmt qcow2
_supported_proto generic
-_unsupported_proto vxhs
# Internal snapshots are (currently) impossible with refcount_bits=1,
# and generally impossible with external data files
_unsupported_imgopts 'refcount_bits=1[^0-9]' data_file
diff --git a/tests/qemu-iotests/073 b/tests/qemu-iotests/073
index 1dce478709..68517821e8 100755
--- a/tests/qemu-iotests/073
+++ b/tests/qemu-iotests/073
@@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto generic
-_unsupported_proto vxhs
# External data files do not support compressed clusters
# (TODO: Consider writing a version for external data files that does
# not test compressed clusters)
diff --git a/tests/qemu-iotests/114 b/tests/qemu-iotests/114
index 5a7b0a4998..80e5e5e591 100755
--- a/tests/qemu-iotests/114
+++ b/tests/qemu-iotests/114
@@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto generic
-_unsupported_proto vxhs
# At least OpenBSD doesn't seem to have truncate
_supported_os Linux
# qcow2.py does not work too well with external data files
diff --git a/tests/qemu-iotests/130 b/tests/qemu-iotests/130
index 77ad2aa13a..a7b365701c 100755
--- a/tests/qemu-iotests/130
+++ b/tests/qemu-iotests/130
@@ -42,7 +42,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto generic
-_unsupported_proto vxhs
_supported_os Linux
# We are going to use lazy-refcounts
_unsupported_imgopts 'compat=0.10'
diff --git a/tests/qemu-iotests/134 b/tests/qemu-iotests/134
index 5162d21662..17fe1d6ed4 100755
--- a/tests/qemu-iotests/134
+++ b/tests/qemu-iotests/134
@@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow qcow2
_supported_proto generic
-_unsupported_proto vxhs
size=128M
diff --git a/tests/qemu-iotests/156 b/tests/qemu-iotests/156
index 7c69a6c3fa..9c7878dd2d 100755
--- a/tests/qemu-iotests/156
+++ b/tests/qemu-iotests/156
@@ -50,7 +50,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2 qed
_supported_proto generic
-_unsupported_proto vxhs
# Copying files around with cp does not work with external data files
_unsupported_imgopts data_file
diff --git a/tests/qemu-iotests/158 b/tests/qemu-iotests/158
index 3175968e2b..cf23742c59 100755
--- a/tests/qemu-iotests/158
+++ b/tests/qemu-iotests/158
@@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow qcow2
_supported_proto generic
-_unsupported_proto vxhs
size=128M
diff --git a/tests/qemu-iotests/282 b/tests/qemu-iotests/282
index 081eb12080..27da2a0023 100755
--- a/tests/qemu-iotests/282
+++ b/tests/qemu-iotests/282
@@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt luks
_supported_proto generic
-_unsupported_proto vxhs
echo "== Create non-UTF8 secret =="
echo -n -e '\x3a\x3c\x3b\xff' > non_utf8_secret
diff --git a/tests/qemu-iotests/check b/tests/qemu-iotests/check
index 9c461cf76d..e0d8049012 100755
--- a/tests/qemu-iotests/check
+++ b/tests/qemu-iotests/check
@@ -272,7 +272,6 @@ image protocol options
-nbd test nbd
-ssh test ssh
-nfs test nfs
- -vxhs test vxhs
other options
-xdiff graphical mode diff
@@ -383,11 +382,6 @@ testlist options
xpand=false
;;
- -vxhs)
- IMGPROTO=vxhs
- xpand=false
- ;;
-
-ssh)
IMGPROTO=ssh
xpand=false
@@ -646,10 +640,6 @@ if [ -z $QEMU_NBD_PROG ]; then
fi
export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")"
-if [ -z "$QEMU_VXHS_PROG" ]; then
- export QEMU_VXHS_PROG="$(set_prog_path qnio_server)"
-fi
-
if [ -x "$build_iotests/socket_scm_helper" ]
then
export SOCKET_SCM_HELPER="$build_iotests/socket_scm_helper"
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index 9b772245cd..c6912be009 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -227,7 +227,6 @@ _filter_img_info()
-e "s#$IMGFMT#IMGFMT#g" \
-e 's#nbd://127.0.0.1:[0-9]\\+$#TEST_DIR/t.IMGFMT#g' \
-e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g' \
- -e 's#json.*vdisk-id.*vxhs"}}#TEST_DIR/t.IMGFMT#' \
-e "/encrypted: yes/d" \
-e "/cluster_size: [0-9]\\+/d" \
-e "/table_size: [0-9]\\+/d" \
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index 7ac46edc1f..494490a272 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -124,7 +124,6 @@ fi
: ${VALGRIND_QEMU_IMG=$VALGRIND_QEMU}
: ${VALGRIND_QEMU_IO=$VALGRIND_QEMU}
: ${VALGRIND_QEMU_NBD=$VALGRIND_QEMU}
-: ${VALGRIND_QEMU_VXHS=$VALGRIND_QEMU}
# The Valgrind own parameters may be set with
# its environment variable VALGRIND_OPTS, e.g.
@@ -212,19 +211,6 @@ _qemu_nbd_wrapper()
return $RETVAL
}
-_qemu_vxhs_wrapper()
-{
- local VALGRIND_LOGFILE="${TEST_DIR}"/$$.valgrind
- (
- echo $BASHPID > "${TEST_DIR}/qemu-vxhs.pid"
- VALGRIND_QEMU="${VALGRIND_QEMU_VXHS}" _qemu_proc_exec
"${VALGRIND_LOGFILE}" \
- "$QEMU_VXHS_PROG" $QEMU_VXHS_OPTIONS "$@"
- )
- RETVAL=$?
- _qemu_proc_valgrind_log "${VALGRIND_LOGFILE}" $RETVAL
- return $RETVAL
-}
-
# Valgrind bug #409141 https://bugs.kde.org/show_bug.cgi?id=409141
# Until valgrind 3.16+ is ubiquitous, we must work around a hang in
# valgrind when issuing sigkill. Disable valgrind for this invocation.
@@ -237,7 +223,6 @@ export QEMU=_qemu_wrapper
export QEMU_IMG=_qemu_img_wrapper
export QEMU_IO=_qemu_io_wrapper
export QEMU_NBD=_qemu_nbd_wrapper
-export QEMU_VXHS=_qemu_vxhs_wrapper
if [ "$IMGOPTSSYNTAX" = "true" ]; then
DRIVER="driver=$IMGFMT"
@@ -279,9 +264,6 @@ else
TEST_IMG_FILE=$TEST_DIR/t.$IMGFMT
REMOTE_TEST_DIR="nfs://127.0.0.1$TEST_DIR"
TEST_IMG="nfs://127.0.0.1$TEST_IMG_FILE"
- elif [ "$IMGPROTO" = "vxhs" ]; then
- TEST_IMG_FILE=$TEST_DIR/t.$IMGFMT
- TEST_IMG="vxhs://127.0.0.1:9999/t.$IMGFMT"
else
TEST_IMG=$IMGPROTO:$TEST_DIR/t.$IMGFMT
fi
@@ -436,12 +418,6 @@ _make_test_img()
eval "$QEMU_NBD -v -t -k '$SOCK_DIR/nbd' -f $IMGFMT -e 42 -x ''
$TEST_IMG_FILE >/dev/null &"
sleep 1 # FIXME: qemu-nbd needs to be listening before we continue
fi
-
- # Start QNIO server on image directory for vxhs protocol
- if [ $IMGPROTO = "vxhs" ]; then
- eval "$QEMU_VXHS -d $TEST_DIR > /dev/null &"
- sleep 1 # Wait for server to come up.
- fi
}
_rm_test_img()
@@ -468,15 +444,6 @@ _cleanup_test_img()
_stop_nbd_server
rm -f "$TEST_IMG_FILE"
;;
- vxhs)
- if [ -f "${TEST_DIR}/qemu-vxhs.pid" ]; then
- local QEMU_VXHS_PID
- read QEMU_VXHS_PID < "${TEST_DIR}/qemu-vxhs.pid"
- kill ${QEMU_VXHS_PID} >/dev/null 2>&1
- rm -f "${TEST_DIR}/qemu-vxhs.pid"
- fi
- rm -f "$TEST_IMG_FILE"
- ;;
file)
_rm_test_img "$TEST_DIR/t.$IMGFMT"
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#master
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |