[qemu-xen master] docs/system: Document the arm virt board

[patchbot@xxxxxxx]

commit 6a0b7505f1fd6769c3f1558fda76464d51e4118a
Author:     Peter Maydell <peter.maydell@xxxxxxxxxx>
AuthorDate: Mon Jul 13 18:57:46 2020 +0100
Commit:     Peter Maydell <peter.maydell@xxxxxxxxxx>
CommitDate: Mon Jul 20 11:35:17 2020 +0100

    docs/system: Document the arm virt board
    
    Document the arm 'virt' board, which has been undocumented
    for far too long given that it is the main recommended board
    type for arm guests.
    
    Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx>
    Reviewed-by: Alex Bennée <alex.bennee@xxxxxxxxxx>
    Message-id: 20200713175746.5936-5-peter.maydell@xxxxxxxxxx
---
 MAINTAINERS                |   1 +
 docs/system/arm/virt.rst   | 161 +++++++++++++++++++++++++++++++++++++++++++++
 docs/system/target-arm.rst |   1 +
 3 files changed, 163 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 935ccb3ab3..5e8616821a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -880,6 +880,7 @@ L: qemu-arm@xxxxxxxxxx
 S: Maintained
 F: hw/arm/virt*
 F: include/hw/arm/virt.h
+F: docs/system/arm/virt.rst
 
 Xilinx Zynq
 M: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxx>
diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst
new file mode 100644
index 0000000000..6621ab7205
--- /dev/null
+++ b/docs/system/arm/virt.rst
@@ -0,0 +1,161 @@
+'virt' generic virtual platform (``virt``)
+==========================================
+
+The `virt` board is a platform which does not correspond to any
+real hardware; it is designed for use in virtual machines.
+It is the recommended board type if you simply want to run
+a guest such as Linux and do not care about reproducing the
+idiosyncrasies and limitations of a particular bit of real-world
+hardware.
+
+This is a "versioned" board model, so as well as the ``virt`` machine
+type itself (which may have improvements, bugfixes and other minor
+changes between QEMU versions) a version is provided that guarantees
+to have the same behaviour as that of previous QEMU releases, so
+that VM migration will work between QEMU versions. For instance the
+``virt-5.0`` machine type will behave like the ``virt`` machine from
+the QEMU 5.0 release, and migration should work between ``virt-5.0``
+of the 5.0 release and ``virt-5.0`` of the 5.1 release. Migration
+is not guaranteed to work between different QEMU releases for
+the non-versioned ``virt`` machine type.
+
+Supported devices
+"""""""""""""""""
+
+The virt board supports:
+
+- PCI/PCIe devices
+- Flash memory
+- One PL011 UART
+- An RTC
+- The fw_cfg device that allows a guest to obtain data from QEMU
+- A PL061 GPIO controller
+- An optional SMMUv3 IOMMU
+- hotpluggable DIMMs
+- hotpluggable NVDIMMs
+- An MSI controller (GICv2M or ITS). GICv2M is selected by default along
+  with GICv2. ITS is selected by default with GICv3 (>= virt-2.7). Note
+  that ITS is not modeled in TCG mode.
+- 32 virtio-mmio transport devices
+- running guests using the KVM accelerator on aarch64 hardware
+- large amounts of RAM (at least 255GB, and more if using highmem)
+- many CPUs (up to 512 if using a GICv3 and highmem)
+- Secure-World-only devices if the CPU has TrustZone:
+
+  - A second PL011 UART
+  - A secure flash memory
+  - 16MB of secure RAM
+
+Supported guest CPU types:
+
+- ``cortex-a7`` (32-bit)
+- ``cortex-a15`` (32-bit; the default)
+- ``cortex-a53`` (64-bit)
+- ``cortex-a57`` (64-bit)
+- ``cortex-a72`` (64-bit)
+- ``host`` (with KVM only)
+- ``max`` (same as ``host`` for KVM; best possible emulation with TCG)
+
+Note that the default is ``cortex-a15``, so for an AArch64 guest you must
+specify a CPU type.
+
+Graphics output is available, but unlike the x86 PC machine types
+there is no default display device enabled: you should select one from
+the Display devices section of "-device help". The recommended option
+is ``virtio-gpu-pci``; this is the only one which will work correctly
+with KVM. You may also need to ensure your guest kernel is configured
+with support for this; see below.
+
+Machine-specific options
+""""""""""""""""""""""""
+
+The following machine-specific options are supported:
+
+secure
+  Set ``on``/``off`` to enable/disable emulating a guest CPU which implements 
the
+  Arm Security Extensions (TrustZone). The default is ``off``.
+
+virtualization
+  Set ``on``/``off`` to enable/disable emulating a guest CPU which implements 
the
+  Arm Virtualization Extensions. The default is ``off``.
+
+highmem
+  Set ``on``/``off`` to enable/disable placing devices and RAM in physical
+  address space above 32 bits. The default is ``on`` for machine types
+  later than ``virt-2.12``.
+
+gic-version
+  Specify the version of the Generic Interrupt Controller (GIC) to provide.
+  Valid values are:
+
+  ``2``
+    GICv2
+  ``3``
+    GICv3
+  ``host``
+    Use the same GIC version the host provides, when using KVM
+  ``max``
+    Use the best GIC version possible (same as host when using KVM;
+    currently same as ``3``` for TCG, but this may change in future)
+
+its
+  Set ``on``/``off`` to enable/disable ITS instantiation. The default is ``on``
+  for machine types later than ``virt-2.7``.
+
+iommu
+  Set the IOMMU type to create for the guest. Valid values are:
+
+  ``none``
+    Don't create an IOMMU (the default)
+  ``smmuv3``
+    Create an SMMUv3
+
+ras
+  Set ``on``/``off`` to enable/disable reporting host memory errors to a guest
+  using ACPI and guest external abort exceptions. The default is off.
+
+Linux guest kernel configuration
+""""""""""""""""""""""""""""""""
+
+The 'defconfig' for Linux arm and arm64 kernels should include the
+right device drivers for virtio and the PCI controller; however some older
+kernel versions, especially for 32-bit Arm, did not have everything
+enabled by default. If you're not seeing PCI devices that you expect,
+then check that your guest config has::
+
+  CONFIG_PCI=y
+  CONFIG_VIRTIO_PCI=y
+  CONFIG_PCI_HOST_GENERIC=y
+
+If you want to use the ``virtio-gpu-pci`` graphics device you will also
+need::
+
+  CONFIG_DRM=y
+  CONFIG_DRM_VIRTIO_GPU=y
+
+Hardware configuration information for bare-metal programming
+"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+
+The ``virt`` board automatically generates a device tree blob ("dtb")
+which it passes to the guest. This provides information about the
+addresses, interrupt lines and other configuration of the various devices
+in the system. Guest code can rely on and hard-code the following
+addresses:
+
+- Flash memory starts at address 0x0000_0000
+
+- RAM starts at 0x4000_0000
+
+All other information about device locations may change between
+QEMU versions, so guest code must look in the DTB.
+
+QEMU supports two types of guest image boot for ``virt``, and
+the way for the guest code to locate the dtb binary differs:
+
+- For guests using the Linux kernel boot protocol (this means any
+  non-ELF file passed to the QEMU ``-kernel`` option) the address
+  of the DTB is passed in a register (``r2`` for 32-bit guests,
+  or ``x0`` for 64-bit guests)
+
+- For guests booting as "bare-metal" (any other kind of boot),
+  the DTB is at the start of RAM (0x4000_0000)
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index 163ab91559..4c5b0e4aab 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -92,6 +92,7 @@ undocumented; you can get a complete list by running
    arm/collie
    arm/sx1
    arm/stellaris
+   arm/virt
 
 Arm CPU features
 ================
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#master