[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen staging] fix spelling errors



commit ba6e78f0db820fbeea4df41fde4655020ca05928
Author:     Diederik de Haas <didi.debian@xxxxxxxxx>
AuthorDate: Fri Dec 4 08:28:21 2020 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Fri Dec 4 08:28:21 2020 +0100

    fix spelling errors
    
    Only spelling errors; no functional changes.
    
    In docs/misc/dump-core-format.txt there are a few more instances of
    'informations'. I'll leave that up to someone who can properly determine
    how those sentences should be constructed.
    
    Signed-off-by: Diederik de Haas <didi.debian@xxxxxxxxx>
    Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
    Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 docs/man/xl.1.pod.in                   | 2 +-
 docs/man/xl.cfg.5.pod.in               | 2 +-
 docs/man/xlcpupool.cfg.5.pod           | 2 +-
 tools/firmware/rombios/rombios.c       | 2 +-
 tools/libs/light/libxl_stream_read.c   | 2 +-
 tools/xl/xl_cmdtable.c                 | 2 +-
 xen/arch/x86/boot/video.S              | 2 +-
 xen/arch/x86/cpu/vpmu.c                | 2 +-
 xen/arch/x86/mpparse.c                 | 2 +-
 xen/arch/x86/x86_emulate/x86_emulate.c | 2 +-
 xen/common/libelf/libelf-dominfo.c     | 2 +-
 xen/drivers/passthrough/arm/smmu.c     | 2 +-
 xen/tools/gen-cpuid.py                 | 2 +-
 xen/xsm/flask/policy/access_vectors    | 2 +-
 14 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/docs/man/xl.1.pod.in b/docs/man/xl.1.pod.in
index f92bacfa72..eaa72faad6 100644
--- a/docs/man/xl.1.pod.in
+++ b/docs/man/xl.1.pod.in
@@ -1578,7 +1578,7 @@ List vsnd devices for a domain.
 Creates a new keyboard device in the domain specified by I<domain-id>.
 I<vkb-device> describes the device to attach, using the same format as the
 B<VKB_SPEC_STRING> string in the domain config file. See L<xl.cfg(5)>
-for more informations.
+for more information.
 
 =item B<vkb-detach> I<domain-id> I<devid>
 
diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in
index 0532739c1f..b4625f56db 100644
--- a/docs/man/xl.cfg.5.pod.in
+++ b/docs/man/xl.cfg.5.pod.in
@@ -2385,7 +2385,7 @@ If B<videoram> is set less than 128MB, an error will be 
triggered.
 
 =item B<stdvga=BOOLEAN>
 
-Speficies a standard VGA card with VBE (VESA BIOS Extensions) as the
+Specifies a standard VGA card with VBE (VESA BIOS Extensions) as the
 emulated graphics device. If your guest supports VBE 2.0 or
 later (e.g. Windows XP onwards) then you should enable this.
 stdvga supports more video ram and bigger resolutions than Cirrus.
diff --git a/docs/man/xlcpupool.cfg.5.pod b/docs/man/xlcpupool.cfg.5.pod
index 3c9ddf7958..c577c7ca3a 100644
--- a/docs/man/xlcpupool.cfg.5.pod
+++ b/docs/man/xlcpupool.cfg.5.pod
@@ -106,7 +106,7 @@ means that cpus 2,3,5 will be member of the cpupool.
 means that cpus 0,2,3 and 5 will be member of the cpupool. A "node:" or
 "nodes:" modifier can be used. E.g., "0,node:1,nodes:2-3,^10-13" means
 that pcpus 0, plus all the cpus of NUMA nodes 1,2,3 with the exception
-of cpus 10,11,12,13 will be memeber of the cpupool.
+of cpus 10,11,12,13 will be members of the cpupool.
 
 =back
 
diff --git a/tools/firmware/rombios/rombios.c b/tools/firmware/rombios/rombios.c
index 51558ee57a..5cda22785f 100644
--- a/tools/firmware/rombios/rombios.c
+++ b/tools/firmware/rombios/rombios.c
@@ -2607,7 +2607,7 @@ void ata_detect( )
   write_byte(ebda_seg,&EbdaData->ata.channels[3].irq,11);
 #endif
 #if BX_MAX_ATA_INTERFACES > 4
-#error Please fill the ATA interface informations
+#error Please fill the ATA interface information
 #endif
 
   // Device detection
diff --git a/tools/libs/light/libxl_stream_read.c 
b/tools/libs/light/libxl_stream_read.c
index 514f6d9f89..99a6714e76 100644
--- a/tools/libs/light/libxl_stream_read.c
+++ b/tools/libs/light/libxl_stream_read.c
@@ -459,7 +459,7 @@ static void stream_continue(libxl__egc *egc,
         while (process_record(egc, stream))
             ; /*
                * Nothing! process_record() helpfully tells us if no specific
-               * futher actions have been set up, in which case we want to go
+               * further actions have been set up, in which case we want to go
                * ahead and process the next record.
                */
         break;
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index 7da6c1b927..6ab5e47da3 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -154,7 +154,7 @@ struct cmd_spec cmd_table[] = {
       "-h  Print this help.\n"
       "-c  Leave domain running after creating the snapshot.\n"
       "-p  Leave domain paused after creating the snapshot.\n"
-      "-D  Store the domain id in the configration."
+      "-D  Store the domain id in the configuration."
     },
     { "migrate",
       &main_migrate, 0, 1,
diff --git a/xen/arch/x86/boot/video.S b/xen/arch/x86/boot/video.S
index a485779ce7..0efbe8d3b3 100644
--- a/xen/arch/x86/boot/video.S
+++ b/xen/arch/x86/boot/video.S
@@ -177,7 +177,7 @@ dac_set:
         movb    $0, _param(PARAM_LFB_COLORS+7)
 
 dac_done:
-# get protected mode interface informations
+# get protected mode interface information
         movw    $0x4f0a, %ax
         xorw    %bx, %bx
         xorw    %di, %di
diff --git a/xen/arch/x86/cpu/vpmu.c b/xen/arch/x86/cpu/vpmu.c
index 1ed39ef03f..ab667361d3 100644
--- a/xen/arch/x86/cpu/vpmu.c
+++ b/xen/arch/x86/cpu/vpmu.c
@@ -680,7 +680,7 @@ static void pvpmu_finish(struct domain *d, xen_pmu_params_t 
*params)
         vcpu_unpause(v);
 }
 
-/* Dump some vpmu informations on console. Used in keyhandler dump_domains(). 
*/
+/* Dump some vpmu information to console. Used in keyhandler dump_domains(). */
 void vpmu_dump(struct vcpu *v)
 {
     struct vpmu_struct *vpmu = vcpu_vpmu(v);
diff --git a/xen/arch/x86/mpparse.c b/xen/arch/x86/mpparse.c
index d532575fee..dff02b142b 100644
--- a/xen/arch/x86/mpparse.c
+++ b/xen/arch/x86/mpparse.c
@@ -170,7 +170,7 @@ static int MP_processor_info_x(struct mpc_config_processor 
*m,
        if (num_processors >= 8 && hotplug
            && genapic.name == apic_default.name) {
                printk_once(XENLOG_WARNING
-                           "WARNING: CPUs limit of 8 reached - ignoring futher 
processors\n");
+                           "WARNING: CPUs limit of 8 reached - ignoring 
further processors\n");
                unaccounted_cpus = true;
                return -ENOSPC;
        }
diff --git a/xen/arch/x86/x86_emulate/x86_emulate.c 
b/xen/arch/x86/x86_emulate/x86_emulate.c
index a35b63634b..6ac0787745 100644
--- a/xen/arch/x86/x86_emulate/x86_emulate.c
+++ b/xen/arch/x86/x86_emulate/x86_emulate.c
@@ -3246,7 +3246,7 @@ x86_decode(
             case 0x23: /* mov reg,dr */
                 /*
                  * Mov to/from cr/dr ignore the encoding of Mod, and behave as
-                 * if they were encoded as reg/reg instructions.  No futher
+                 * if they were encoded as reg/reg instructions.  No further
                  * disp/SIB bytes are fetched.
                  */
                 modrm_mod = 3;
diff --git a/xen/common/libelf/libelf-dominfo.c 
b/xen/common/libelf/libelf-dominfo.c
index 508f08db42..69c94b6f3b 100644
--- a/xen/common/libelf/libelf-dominfo.c
+++ b/xen/common/libelf/libelf-dominfo.c
@@ -1,5 +1,5 @@
 /*
- * parse xen-specific informations out of elf kernel binaries.
+ * parse xen-specific information out of elf kernel binaries.
  *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
diff --git a/xen/drivers/passthrough/arm/smmu.c 
b/xen/drivers/passthrough/arm/smmu.c
index b8321f5d8d..ed04d85e05 100644
--- a/xen/drivers/passthrough/arm/smmu.c
+++ b/xen/drivers/passthrough/arm/smmu.c
@@ -214,7 +214,7 @@ struct iommu_domain
        struct list_head                list;
 };
 
-/* Xen: Describes informations required for a Xen domain */
+/* Xen: Describes information required for a Xen domain */
 struct arm_smmu_xen_domain {
        spinlock_t                      lock;
        /* List of context (i.e iommu_domain) associated to this domain */
diff --git a/xen/tools/gen-cpuid.py b/xen/tools/gen-cpuid.py
index 50412b9a46..36f67750e5 100755
--- a/xen/tools/gen-cpuid.py
+++ b/xen/tools/gen-cpuid.py
@@ -192,7 +192,7 @@ def crunch_numbers(state):
         FXSR: [FFXSR, SSE],
 
         # SSE is taken to mean support for the %XMM registers as well as the
-        # instructions.  Several futher instruction sets are built on core
+        # instructions.  Several further instruction sets are built on core
         # %XMM support, without specific inter-dependencies.  Additionally
         # AMD has a special mis-alignment sub-mode.
         SSE: [SSE2, MISALIGNSSE],
diff --git a/xen/xsm/flask/policy/access_vectors 
b/xen/xsm/flask/policy/access_vectors
index 1aa0bb501c..6359c7fc87 100644
--- a/xen/xsm/flask/policy/access_vectors
+++ b/xen/xsm/flask/policy/access_vectors
@@ -507,7 +507,7 @@ class security
 #
 class version
 {
-# Extra informations (-unstable).
+# Extra information (-unstable).
     xen_extraversion
 # Compile information of the hypervisor.
     xen_compile_info
--
generated by git-patchbot for /home/xen/git/xen.git#staging



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.