[xen stable-4.14] x86/vpt: do not take pt_migrate rwlock in some cases

[patchbot@xxxxxxx]

commit a67f981352a21e8e3ade9944c238fce30b23938f
Author:     Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
AuthorDate: Tue Apr 20 12:04:16 2021 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Apr 20 12:04:16 2021 +0200

    x86/vpt: do not take pt_migrate rwlock in some cases
    
    Commit 8e76aef72820 ("x86/vpt: fix race when migrating timers between
    vCPUs") addressed XSA-336 by introducing a per-domain rwlock that was
    intended to protect periodic timer during VCPU migration. Since such
    migration is an infrequent event no performance impact was expected.
    
    Unfortunately this turned out not to be the case: on a fairly large
    guest (92 VCPUs) we've observed as much as 40% TPCC performance
    regression with some guest kernels. Further investigation pointed to
    pt_migrate read lock taken in pt_update_irq() as the largest contributor
    to this regression. With large number of VCPUs and large number of VMEXITs
    (from where pt_update_irq() is always called) the update of an atomic in
    read_lock() is thought to be the main cause.
    
    Stephen Brennan analyzed locking pattern and classified lock users as
    follows:
    
    1. Functions which read (maybe write) all periodic_time instances attached
    to a particular vCPU. These are functions which use pt_vcpu_lock() such
    as pt_restore_timer(), pt_save_timer(), etc.
    2. Functions which want to modify a particular periodic_time object.
    These functions lock whichever vCPU the periodic_time is attached to, but
    since the vCPU could be modified without holding any lock, they are
    vulnerable to XSA-336. Functions in this group use pt_lock(), such as
    pt_timer_fn() or destroy_periodic_time().
    3. Functions which not only want to modify the periodic_time, but also
    would like to modify the =vcpu= fields. These are create_periodic_time()
    or pt_adjust_vcpu(). They create XSA-336 conditions for group 2, but we
    can't simply hold 2 vcpu locks due to the deadlock risk.
    
    Roger then pointed out that group 1 functions don't really need to hold
    the pt_migrate rwlock and that instead groups 2 and 3 should hold per-vcpu
    lock whenever they modify per-vcpu timer lists.
    
    Suggested-by: Stephen Brennan <stephen.s.brennan@xxxxxxxxxx>
    Suggested-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Signed-off-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
    Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Reviewed-by: Stephen Brennan <stephen.s.brennan@xxxxxxxxxx>
    master commit: 1f3d87c7512975274cc45c40097b05550eba1ac9
    master date: 2021-04-09 09:21:27 +0200
---
 xen/arch/x86/hvm/vpt.c        | 44 ++++++++++++++++++++++++++++++++++---------
 xen/include/asm-x86/hvm/vpt.h | 18 ++++++++++++------
 2 files changed, 47 insertions(+), 15 deletions(-)

diff --git a/xen/arch/x86/hvm/vpt.c b/xen/arch/x86/hvm/vpt.c
index ae7f715620..6a5458c8b7 100644
--- a/xen/arch/x86/hvm/vpt.c
+++ b/xen/arch/x86/hvm/vpt.c
@@ -153,32 +153,43 @@ static int pt_irq_masked(struct periodic_time *pt)
     return 1;
 }
 
+/*
+ * Functions which read (maybe write) all periodic_time instances
+ * attached to a particular vCPU use pt_vcpu_{un}lock locking helpers.
+ *
+ * Such users are explicitly forbidden from changing the value of the
+ * pt->vcpu field, because another thread holding the pt_migrate lock
+ * may already be spinning waiting for your vcpu lock.
+ */
 static void pt_vcpu_lock(struct vcpu *v)
 {
-    read_lock(&v->domain->arch.hvm.pl_time->pt_migrate);
     spin_lock(&v->arch.hvm.tm_lock);
 }
 
 static void pt_vcpu_unlock(struct vcpu *v)
 {
     spin_unlock(&v->arch.hvm.tm_lock);
-    read_unlock(&v->domain->arch.hvm.pl_time->pt_migrate);
 }
 
+/*
+ * Functions which want to modify a particular periodic_time object
+ * use pt_{un}lock locking helpers.
+ *
+ * These users lock whichever vCPU the periodic_time is attached to,
+ * but since the vCPU could be modified without holding any lock, they
+ * need to take an additional lock that protects against pt->vcpu
+ * changing.
+ */
 static void pt_lock(struct periodic_time *pt)
 {
-    /*
-     * We cannot use pt_vcpu_lock here, because we need to acquire the
-     * per-domain lock first and then (re-)fetch the value of pt->vcpu, or
-     * else we might be using a stale value of pt->vcpu.
-     */
     read_lock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate);
     spin_lock(&pt->vcpu->arch.hvm.tm_lock);
 }
 
 static void pt_unlock(struct periodic_time *pt)
 {
-    pt_vcpu_unlock(pt->vcpu);
+    spin_unlock(&pt->vcpu->arch.hvm.tm_lock);
+    read_unlock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate);
 }
 
 static void pt_process_missed_ticks(struct periodic_time *pt)
@@ -543,8 +554,10 @@ void create_periodic_time(
     pt->cb = cb;
     pt->priv = data;
 
+    pt_vcpu_lock(v);
     pt->on_list = 1;
     list_add(&pt->list, &v->arch.hvm.tm_list);
+    pt_vcpu_unlock(v);
 
     init_timer(&pt->timer, pt_timer_fn, pt, v->processor);
     set_timer(&pt->timer, pt->scheduled);
@@ -580,13 +593,26 @@ static void pt_adjust_vcpu(struct periodic_time *pt, 
struct vcpu *v)
         return;
 
     write_lock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate);
+
+    if ( pt->vcpu == v )
+        goto out;
+
+    pt_vcpu_lock(pt->vcpu);
+    if ( pt->on_list )
+        list_del(&pt->list);
+    pt_vcpu_unlock(pt->vcpu);
+
     pt->vcpu = v;
+
+    pt_vcpu_lock(v);
     if ( pt->on_list )
     {
-        list_del(&pt->list);
         list_add(&pt->list, &v->arch.hvm.tm_list);
         migrate_timer(&pt->timer, v->processor);
     }
+    pt_vcpu_unlock(v);
+
+ out:
     write_unlock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate);
 }
 
diff --git a/xen/include/asm-x86/hvm/vpt.h b/xen/include/asm-x86/hvm/vpt.h
index 39d26cbda4..74c0cedd11 100644
--- a/xen/include/asm-x86/hvm/vpt.h
+++ b/xen/include/asm-x86/hvm/vpt.h
@@ -128,12 +128,18 @@ struct pl_time {    /* platform time */
     struct RTCState  vrtc;
     struct HPETState vhpet;
     struct PMTState  vpmt;
-    /*
-     * rwlock to prevent periodic_time vCPU migration. Take the lock in read
-     * mode in order to prevent the vcpu field of periodic_time from changing.
-     * Lock must be taken in write mode when changes to the vcpu field are
-     * performed, as it allows exclusive access to all the timers of a domain.
-     */
+     /*
+      * Functions which want to modify the vcpu field of the vpt need
+      * to hold the global lock (pt_migrate) in write mode together
+      * with the per-vcpu locks of the lists being modified. Functions
+      * that want to lock a periodic_timer that's possibly on a
+      * different vCPU list need to take the lock in read mode first in
+      * order to prevent the vcpu field of periodic_timer from
+      * changing.
+      *
+      * Note that two vcpu locks cannot be held at the same time to
+      * avoid a deadlock.
+      */
     rwlock_t pt_migrate;
     /* guest_time = Xen sys time + stime_offset */
     int64_t stime_offset;
--
generated by git-patchbot for /home/xen/git/xen.git#stable-4.14