|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen staging-4.14] VT-d: eliminate flush related timeouts
commit e5bce3a74bacfe570233d61e57d31438d21fafd5
Author: Jan Beulich <jbeulich@xxxxxxxx>
AuthorDate: Tue Jun 8 18:16:02 2021 +0100
Commit: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Tue Jun 8 18:36:03 2021 +0100
VT-d: eliminate flush related timeouts
Leaving an in-progress operation pending when it appears to take too
long is problematic: If e.g. a QI command completed later, the write to
the "poll slot" may instead be understood to signal a subsequently
started command's completion. Also our accounting of the timeout period
was actually wrong: We included the time it took for the command to
actually make it to the front of the queue, which could be heavily
affected by guests other than the one for which the flush is being
performed.
Do away with all timeout detection on all flush related code paths.
Log excessively long processing times (with a progressive threshold) to
have some indication of problems in this area.
Additionally log (once) if qinval_next_index() didn't immediately find
an available slot. Together with the earlier change sizing the queue(s)
dynamically, we should now have a guarantee that with our fully
synchronous model any demand for slots can actually be satisfied.
This is part of XSA-373 / CVE-2021-28692.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
Reviewed-by: Paul Durrant <paul@xxxxxxx>
(cherry picked from commit 7c893abc4ee7e9af62297ba6fd5f27c89d0f33f5)
---
xen/drivers/passthrough/vtd/dmar.h | 28 ++++++++++++++++++++++++++++
xen/drivers/passthrough/vtd/iommu.c | 12 ++++++------
xen/drivers/passthrough/vtd/qinval.c | 33 ++++++++++++++++++++++-----------
3 files changed, 56 insertions(+), 17 deletions(-)
diff --git a/xen/drivers/passthrough/vtd/dmar.h
b/xen/drivers/passthrough/vtd/dmar.h
index 1a9c965e59..a44820a5e7 100644
--- a/xen/drivers/passthrough/vtd/dmar.h
+++ b/xen/drivers/passthrough/vtd/dmar.h
@@ -127,6 +127,34 @@ do { \
} \
} while (0)
+#define IOMMU_FLUSH_WAIT(what, iommu, offset, op, cond, sts) \
+do { \
+ static unsigned int __read_mostly threshold = 1; \
+ s_time_t start = NOW(); \
+ s_time_t timeout = start + DMAR_OPERATION_TIMEOUT * threshold; \
+ \
+ for ( ; ; ) \
+ { \
+ sts = op(iommu->reg, offset); \
+ if ( cond ) \
+ break; \
+ if ( timeout && NOW() > timeout ) \
+ { \
+ threshold |= threshold << 1; \
+ printk(XENLOG_WARNING VTDPREFIX \
+ " IOMMU#%u: %s flush taking too long\n", \
+ iommu->index, what); \
+ timeout = 0; \
+ } \
+ cpu_relax(); \
+ } \
+ \
+ if ( !timeout ) \
+ printk(XENLOG_WARNING VTDPREFIX \
+ " IOMMU#%u: %s flush took %lums\n", \
+ iommu->index, what, (NOW() - start) / 10000000); \
+} while ( false )
+
int vtd_hw_check(void);
void disable_pmr(struct vtd_iommu *iommu);
int is_igd_drhd(struct acpi_drhd_unit *drhd);
diff --git a/xen/drivers/passthrough/vtd/iommu.c
b/xen/drivers/passthrough/vtd/iommu.c
index 32ff60bfe3..bef3d594c9 100644
--- a/xen/drivers/passthrough/vtd/iommu.c
+++ b/xen/drivers/passthrough/vtd/iommu.c
@@ -326,8 +326,8 @@ static void iommu_flush_write_buffer(struct vtd_iommu
*iommu)
dmar_writel(iommu->reg, DMAR_GCMD_REG, val | DMA_GCMD_WBF);
/* Make sure hardware complete it */
- IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, dmar_readl,
- !(val & DMA_GSTS_WBFS), val);
+ IOMMU_FLUSH_WAIT("write buffer", iommu, DMAR_GSTS_REG, dmar_readl,
+ !(val & DMA_GSTS_WBFS), val);
spin_unlock_irqrestore(&iommu->register_lock, flags);
}
@@ -376,8 +376,8 @@ int vtd_flush_context_reg(struct vtd_iommu *iommu, uint16_t
did,
dmar_writeq(iommu->reg, DMAR_CCMD_REG, val);
/* Make sure hardware complete it */
- IOMMU_WAIT_OP(iommu, DMAR_CCMD_REG, dmar_readq,
- !(val & DMA_CCMD_ICC), val);
+ IOMMU_FLUSH_WAIT("context", iommu, DMAR_CCMD_REG, dmar_readq,
+ !(val & DMA_CCMD_ICC), val);
spin_unlock_irqrestore(&iommu->register_lock, flags);
/* flush context entry will implicitly flush write buffer */
@@ -454,8 +454,8 @@ int vtd_flush_iotlb_reg(struct vtd_iommu *iommu, uint16_t
did, uint64_t addr,
dmar_writeq(iommu->reg, tlb_offset + 8, val);
/* Make sure hardware complete it */
- IOMMU_WAIT_OP(iommu, (tlb_offset + 8), dmar_readq,
- !(val & DMA_TLB_IVT), val);
+ IOMMU_FLUSH_WAIT("iotlb", iommu, (tlb_offset + 8), dmar_readq,
+ !(val & DMA_TLB_IVT), val);
spin_unlock_irqrestore(&iommu->register_lock, flags);
/* check IOTLB invalidation granularity */
diff --git a/xen/drivers/passthrough/vtd/qinval.c
b/xen/drivers/passthrough/vtd/qinval.c
index 86a941ce27..1056ab1feb 100644
--- a/xen/drivers/passthrough/vtd/qinval.c
+++ b/xen/drivers/passthrough/vtd/qinval.c
@@ -29,8 +29,6 @@
#include "extern.h"
#include "../ats.h"
-#define VTD_QI_TIMEOUT 1
-
static unsigned int __read_mostly qi_pg_order;
static unsigned int __read_mostly qi_entry_nr;
@@ -60,7 +58,11 @@ static unsigned int qinval_next_index(struct vtd_iommu
*iommu)
/* (tail+1 == head) indicates a full queue, wait for HW */
while ( ((tail + 1) & (qi_entry_nr - 1)) ==
( dmar_readq(iommu->reg, DMAR_IQH_REG) >> QINVAL_INDEX_SHIFT ) )
+ {
+ printk_once(XENLOG_ERR VTDPREFIX " IOMMU#%u: no QI slot available\n",
+ iommu->index);
cpu_relax();
+ }
return tail;
}
@@ -180,23 +182,32 @@ static int __must_check queue_invalidate_wait(struct
vtd_iommu *iommu,
/* Now we don't support interrupt method */
if ( sw )
{
- s_time_t timeout;
-
- /* In case all wait descriptor writes to same addr with same data */
- timeout = NOW() + MILLISECS(flush_dev_iotlb ?
- iommu_dev_iotlb_timeout : VTD_QI_TIMEOUT);
+ static unsigned int __read_mostly threshold = 1;
+ s_time_t start = NOW();
+ s_time_t timeout = start + (flush_dev_iotlb
+ ? iommu_dev_iotlb_timeout
+ : 100) * MILLISECS(threshold);
while ( ACCESS_ONCE(*this_poll_slot) != QINVAL_STAT_DONE )
{
- if ( NOW() > timeout )
+ if ( timeout && NOW() > timeout )
{
- print_qi_regs(iommu);
+ threshold |= threshold << 1;
printk(XENLOG_WARNING VTDPREFIX
- " Queue invalidate wait descriptor timed out\n");
- return -ETIMEDOUT;
+ " IOMMU#%u: QI%s wait descriptor taking too long\n",
+ iommu->index, flush_dev_iotlb ? " dev" : "");
+ print_qi_regs(iommu);
+ timeout = 0;
}
cpu_relax();
}
+
+ if ( !timeout )
+ printk(XENLOG_WARNING VTDPREFIX
+ " IOMMU#%u: QI%s wait descriptor took %lums\n",
+ iommu->index, flush_dev_iotlb ? " dev" : "",
+ (NOW() - start) / 10000000);
+
return 0;
}
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.14
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |