[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen staging] tools: disable building qemu-trad per default



commit faddd16e367530fe4de5480610f69d8ceb6011d8
Author:     Juergen Gross <jgross@xxxxxxxx>
AuthorDate: Thu Nov 4 17:11:21 2021 +0100
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Thu Nov 4 18:43:20 2021 +0000

    tools: disable building qemu-trad per default
    
    Using qemu-traditional as device model is deprecated for some time now.
    
    So change the default for building it to "disable". This will affect
    ioemu-stubdom, too, as there is a direct dependency between the two.
    
    Today it is possible to use a PVH/HVM Linux-based stubdom as device
    model. Additionally using ioemu-stubdom isn't really helping for
    security, as it requires to run a very old and potentially buggy qemu
    version in a PV domain. This is adding probably more security problems
    than it is removing by using a stubdom.
    
    Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
    Reviewed-by: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>
    Acked-by: Ian Jackson <iwj@xxxxxxxxxxxxxx>
    Release-acked-by: Ian Jackson <iwj@xxxxxxxxxxxxxx>
---
 CHANGELOG.md         |  3 +++
 stubdom/configure    |  8 --------
 stubdom/configure.ac |  8 +-------
 tools/configure      | 17 ++---------------
 tools/configure.ac   | 13 +------------
 5 files changed, 7 insertions(+), 42 deletions(-)

diff --git a/CHANGELOG.md b/CHANGELOG.md
index e7107ac3de..e5ab49e779 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -18,6 +18,9 @@ The format is based on [Keep a 
Changelog](https://keepachangelog.com/en/1.0.0/)
    or by passing "iommu=quarantine=scratch-page" on the hypervisor command 
line.
  - pv-grub stubdoms will no longer be built per default. In order to be able 
to use pv-grub
    configure needs to be called with "--enable-pv-grub" as parameter.
+ - qemu-traditional based device models (both, qemu-traditional and 
ioemu-stubdom) will
+   no longer be built per default. In order to be able to use those, configure 
needs to
+   be called with "--enable-qemu-traditional" as parameter.
 
 ## [4.15.0 
UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=RELEASE-4.15.0)
 - TBD
 
diff --git a/stubdom/configure b/stubdom/configure
index df31532abb..07b709f998 100755
--- a/stubdom/configure
+++ b/stubdom/configure
@@ -2286,14 +2286,6 @@ fi
 # Check whether --enable-qemu-traditional was given.
 if test "${enable_qemu_traditional+set}" = set; then :
   enableval=$enable_qemu_traditional;
-else
-
-    case "$host_cpu" in
-        i[3456]86|x86_64)
-           enable_qemu_traditional="yes";;
-        *) enable_qemu_traditional="no";;
-    esac
-
 fi
 
 if test "x$enable_qemu_traditional" = "xyes"; then :
diff --git a/stubdom/configure.ac b/stubdom/configure.ac
index a07a1edae5..e20d99edac 100644
--- a/stubdom/configure.ac
+++ b/stubdom/configure.ac
@@ -27,13 +27,7 @@ AX_STUBDOM_DEFAULT_ENABLE([xenstorepvh-stubdom], 
[xenstorepvh])
 AX_STUBDOM_CONDITIONAL([vtpm-stubdom], [vtpm])
 AX_STUBDOM_CONDITIONAL([vtpmmgr-stubdom], [vtpmmgr])
 
-AC_ARG_ENABLE([qemu-traditional],,,[
-    case "$host_cpu" in
-        i[[3456]]86|x86_64)
-           enable_qemu_traditional="yes";;
-        *) enable_qemu_traditional="no";;
-    esac
-])
+AC_ARG_ENABLE([qemu-traditional])
 AS_IF([test "x$enable_qemu_traditional" = "xyes"], [
     qemu_traditional=y],[
     qemu_traditional=n
diff --git a/tools/configure b/tools/configure
index d980b3ffc9..a3d33eb907 100755
--- a/tools/configure
+++ b/tools/configure
@@ -1502,8 +1502,8 @@ Optional Features:
   --disable-seabios       Disable SeaBIOS (default is ENABLED)
   --disable-golang        Disable Go tools (default is ENABLED)
   --enable-qemu-traditional
-                          Enable qemu traditional device model, (DEFAULT is on
-                          for Linux or NetBSD x86, otherwise off)
+                          Enable qemu traditional device model, (DEFAULT is
+                          off)
   --enable-ipxe           Enable in-tree IPXE, (DEFAULT is on for x86,
                           otherwise off, see also --with-system-ipxe)
   --enable-rombios        Enable ROMBIOS, (DEFAULT is on if qemu-traditional
@@ -4286,19 +4286,6 @@ LINUX_BACKEND_MODULES="`eval echo 
$LINUX_BACKEND_MODULES`"
 # Check whether --enable-qemu-traditional was given.
 if test "${enable_qemu_traditional+set}" = set; then :
   enableval=$enable_qemu_traditional;
-else
-
-    case "$host_cpu" in
-        i[3456]86|x86_64)
-           enable_qemu_traditional="yes";;
-        *) enable_qemu_traditional="no";;
-    esac
-    case "$host_os" in
-        freebsd*)
-           enable_qemu_traditional="no";;
-    esac
-
-
 fi
 
 if test "x$enable_qemu_traditional" = "xyes"; then :
diff --git a/tools/configure.ac b/tools/configure.ac
index 97582951c8..03eb7cf146 100644
--- a/tools/configure.ac
+++ b/tools/configure.ac
@@ -120,18 +120,7 @@ AC_SUBST(LINUX_BACKEND_MODULES)
 
 AC_ARG_ENABLE([qemu-traditional],
     AS_HELP_STRING([--enable-qemu-traditional],
-                   [Enable qemu traditional device model, (DEFAULT is on for 
Linux or NetBSD x86, otherwise off)]),,[
-    case "$host_cpu" in
-        i[[3456]]86|x86_64)
-           enable_qemu_traditional="yes";;
-        *) enable_qemu_traditional="no";;
-    esac
-    case "$host_os" in
-        freebsd*)
-           enable_qemu_traditional="no";;
-    esac
-
-])
+                   [Enable qemu traditional device model, (DEFAULT is off)]))
 AS_IF([test "x$enable_qemu_traditional" = "xyes"], [
 AC_DEFINE([HAVE_QEMU_TRADITIONAL], [1], [Qemu traditional enabled])
     qemu_traditional=y],[
--
generated by git-patchbot for /home/xen/git/xen.git#staging



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.