[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] build: xen/include: use if_changed



commit 28e13c7f4382f5dce6b2fb2ccef2098f22c04694
Author:     Anthony PERARD <anthony.perard@xxxxxxxxxx>
AuthorDate: Wed Jun 8 17:00:29 2022 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Wed Jun 8 17:00:29 2022 +0200

    build: xen/include: use if_changed
    
    Use "define" for the headers*_chk commands. That allow us to keep
    writing "#include" in the Makefile without having to replace that by
    "$(pound)include" which would be a bit less obvious about the command
    line purpose.
    
    Adding several .PRECIOUS as without them `make` deletes the
    intermediate targets. This is an issue because the macro $(if_changed,)
    check if the target exist in order to decide whether to recreate the
    target.
    
    Removing the call to `mkdir` from the commands. Those aren't needed
    anymore because a rune in Rules.mk creates the directory for each
    $(targets).
    
    Remove "export PYTHON" as it is already exported.
    
    Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
    Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/include/Makefile | 108 ++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 76 insertions(+), 32 deletions(-)

diff --git a/xen/include/Makefile b/xen/include/Makefile
index 03baf10efb..6d9bcc19b0 100644
--- a/xen/include/Makefile
+++ b/xen/include/Makefile
@@ -45,38 +45,65 @@ public-$(CONFIG_ARM) := $(wildcard 
$(srcdir)/public/arch-arm/*.h $(srcdir)/publi
 .PHONY: all
 all: $(addprefix $(obj)/,$(headers-y))
 
-$(obj)/compat/%.h: $(obj)/compat/%.i $(srcdir)/Makefile 
$(srctree)/tools/compat-build-header.py
-       $(PYTHON) $(srctree)/tools/compat-build-header.py <$< $(patsubst 
$(obj)/%,%,$@) >>$@.new; \
-       mv -f $@.new $@
-
-$(obj)/compat/%.i: $(obj)/compat/%.c $(srcdir)/Makefile
-       $(CPP) $(filter-out -Wa$(comma)% -include 
%/include/xen/config.h,$(XEN_CFLAGS)) $(cppflags-y) -o $@ $<
-
-$(obj)/compat/%.c: $(src)/public/%.h $(srcdir)/xlat.lst $(srcdir)/Makefile 
$(srctree)/tools/compat-build-source.py
-       mkdir -p $(@D)
-       $(PYTHON) $(srctree)/tools/compat-build-source.py $(srcdir)/xlat.lst 
<$< >$@.new
-       mv -f $@.new $@
-
-$(obj)/compat/.xlat/%.h: $(obj)/compat/%.h $(obj)/compat/.xlat/%.lst 
$(srctree)/tools/get-fields.sh $(srcdir)/Makefile
-       export PYTHON=$(PYTHON); \
-       while read what name; do \
-               $(SHELL) $(srctree)/tools/get-fields.sh "$$what" compat_$$name 
$< || exit $$?; \
-       done <$(patsubst $(obj)/compat/%,$(obj)/compat/.xlat/%,$(basename 
$<)).lst >$@.new
-       mv -f $@.new $@
+quiet_cmd_compat_h = GEN     $@
+cmd_compat_h = \
+    $(PYTHON) $(srctree)/tools/compat-build-header.py <$< $(patsubst 
$(obj)/%,%,$@) >>$@.new; \
+    mv -f $@.new $@
+
+quiet_cmd_compat_i = CPP     $@
+cmd_compat_i = $(CPP) $(filter-out -Wa$(comma)% -include 
%/include/xen/config.h,$(XEN_CFLAGS)) $(cppflags-y) -o $@ $<
+
+quiet_cmd_compat_c = GEN     $@
+cmd_compat_c = \
+   $(PYTHON) $(srctree)/tools/compat-build-source.py $(srcdir)/xlat.lst <$< 
>$@.new; \
+   mv -f $@.new $@
+
+quiet_cmd_xlat_headers = GEN     $@
+cmd_xlat_headers = \
+    while read what name; do \
+        $(SHELL) $(srctree)/tools/get-fields.sh "$$what" compat_$$name $< || 
exit $$?; \
+    done <$(patsubst $(obj)/compat/%,$(obj)/compat/.xlat/%,$(basename $<)).lst 
>$@.new; \
+    mv -f $@.new $@
+
+targets += $(headers-y)
+$(obj)/compat/%.h: $(obj)/compat/%.i $(srctree)/tools/compat-build-header.py 
FORCE
+       $(call if_changed,compat_h)
+
+.PRECIOUS: $(obj)/compat/%.i
+targets += $(patsubst %.h, %.i, $(headers-y))
+$(obj)/compat/%.i: $(obj)/compat/%.c FORCE
+       $(call if_changed,compat_i)
+
+.PRECIOUS: $(obj)/compat/%.c
+targets += $(patsubst %.h, %.c, $(headers-y))
+$(obj)/compat/%.c: $(src)/public/%.h $(srcdir)/xlat.lst 
$(srctree)/tools/compat-build-source.py FORCE
+       $(call if_changed,compat_c)
+
+targets += $(patsubst compat/%, compat/.xlat/%, $(headers-y))
+$(obj)/compat/.xlat/%.h: $(obj)/compat/%.h $(obj)/compat/.xlat/%.lst 
$(srctree)/tools/get-fields.sh FORCE
+       $(call if_changed,xlat_headers)
+
+quiet_cmd_xlat_lst = GEN     $@
+cmd_xlat_lst = \
+       grep -v '^[[:blank:]]*$(pound)' $< | sed -ne 
's,@arch@,$(compat-arch-y),g' -re 's,[[:blank:]]+$*\.h[[:blank:]]*$$,,p' 
>$@.new; \
+       $(call move-if-changed,$@.new,$@)
 
 .PRECIOUS: $(obj)/compat/.xlat/%.lst
-$(obj)/compat/.xlat/%.lst: $(srcdir)/xlat.lst $(srcdir)/Makefile
-       mkdir -p $(@D)
-       grep -v '^[[:blank:]]*#' $< | sed -ne 's,@arch@,$(compat-arch-y),g' -re 
's,[[:blank:]]+$*\.h[[:blank:]]*$$,,p' >$@.new
-       $(call move-if-changed,$@.new,$@)
+targets += $(patsubst compat/%.h, compat/.xlat/%.lst, $(headers-y))
+$(obj)/compat/.xlat/%.lst: $(srcdir)/xlat.lst FORCE
+       $(call if_changed,xlat_lst)
 
 xlat-y := $(shell sed -ne 's,@arch@,$(compat-arch-y),g' -re 
's,^[?!][[:blank:]]+[^[:blank:]]+[[:blank:]]+,,p' $(srcdir)/xlat.lst | uniq)
 xlat-y := $(filter $(patsubst compat/%,%,$(headers-y)),$(xlat-y))
 
-$(obj)/compat/xlat.h: $(addprefix $(obj)/compat/.xlat/,$(xlat-y)) 
$(obj)/config/auto.conf $(srcdir)/Makefile
-       cat $(filter %.h,$^) >$@.new
+quiet_cmd_xlat_h = GEN     $@
+cmd_xlat_h = \
+       cat $(filter %.h,$^) >$@.new; \
        mv -f $@.new $@
 
+$(obj)/compat/xlat.h: $(addprefix $(obj)/compat/.xlat/,$(xlat-y)) 
$(obj)/config/auto.conf FORCE
+       $(call if_changed,xlat_h)
+
 ifeq ($(XEN_TARGET_ARCH),$(XEN_COMPILE_ARCH))
 
 all: $(obj)/headers.chk $(obj)/headers99.chk $(obj)/headers++.chk
@@ -102,27 +129,31 @@ PUBLIC_C99_HEADERS := $(call 
public-filter-headers,public-c99-headers)
 $(src)/public/io/9pfs.h-prereq := string
 $(src)/public/io/pvcalls.h-prereq := string
 
-$(obj)/headers.chk: $(PUBLIC_ANSI_HEADERS) $(srcdir)/Makefile
+quiet_cmd_header_chk = CHK     $@
+cmd_header_chk = \
        for i in $(filter %.h,$^); do \
            $(CC) -x c -ansi -Wall -Werror -include stdint.h \
                  -S -o /dev/null $$i || exit 1; \
            echo $$i; \
-       done >$@.new
+       done >$@.new; \
        mv $@.new $@
 
-$(obj)/headers99.chk: $(PUBLIC_C99_HEADERS) $(srcdir)/Makefile
-       rm -f $@.new
+quiet_cmd_headers99_chk = CHK     $@
+define cmd_headers99_chk
+       rm -f $@.new; \
        $(foreach i, $(filter %.h,$^),                                        \
            echo "#include "\"$(i)\"                                          \
            | $(CC) -x c -std=c99 -Wall -Werror                               \
              -include stdint.h                                               \
              $(foreach j, $($(patsubst $(srctree)/%,%,$i)-prereq), -include 
$(j).h) \
              -S -o /dev/null -                                               \
-           || exit $$?; echo $(i) >> $@.new;)
+           || exit $$?; echo $(i) >> $@.new;) \
        mv $@.new $@
+endef
 
-$(obj)/headers++.chk: $(PUBLIC_HEADERS) $(srcdir)/Makefile
-       rm -f $@.new
+quiet_cmd_headerscxx_chk = CHK     $@
+define cmd_headerscxx_chk
+       rm -f $@.new; \
        if ! $(CXX) -v >/dev/null 2>&1; then                                  \
            touch $@.new;                                                     \
            exit 0;                                                           \
@@ -133,8 +164,21 @@ $(obj)/headers++.chk: $(PUBLIC_HEADERS) $(srcdir)/Makefile
              -include stdint.h -include $(srcdir)/public/xen.h               \
              $(foreach j, $($(patsubst $(srctree)/%,%,$i)-prereq), -include 
c$(j)) \
              -S -o /dev/null -                                               \
-           || exit $$?; echo $(i) >> $@.new;)
+           || exit $$?; echo $(i) >> $@.new;) \
        mv $@.new $@
+endef
+
+targets += headers.chk
+$(obj)/headers.chk: $(PUBLIC_ANSI_HEADERS) FORCE
+       $(call if_changed,header_chk)
+
+targets += headers99.chk
+$(obj)/headers99.chk: $(PUBLIC_C99_HEADERS) FORCE
+       $(call if_changed,headers99_chk)
+
+targets += headers++.chk
+$(obj)/headers++.chk: $(PUBLIC_HEADERS) FORCE
+       $(call if_changed,headerscxx_chk)
 
 endif
 
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.