[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] tools/include: drop leading underscore from xen_list header



commit 9d067857d1ff6805608aac4d9c0ea1c848b2e637
Author:     Roger Pau Monné <roger.pau@xxxxxxxxxx>
AuthorDate: Mon Jun 20 14:35:00 2022 +0200
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Mon Jun 20 14:05:29 2022 +0100

    tools/include: drop leading underscore from xen_list header
    
    A leading underscore is used to indicate auto generated headers, and
    the clean use of 'rm -f _*.h' will remove those.  _xen_list.h also
    uses a leading underscore, but is checked in the repo and as such
    cannot be removed as part of the clean rule.
    
    Fix this by dropping the leading underscore, so that the header is not
    removed.
    
    Fixes: a03b3552d4 ('libs,tools/include: Clean "clean" targets')
    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Reviewed-by: Juergen Gross <jgross@xxxxxxxx>
---
 tools/include/Makefile               |   4 +-
 tools/include/_xen_list.h            | 509 -----------------------------------
 tools/include/libxl.h                |   2 +-
 tools/include/xen_list.h             | 509 +++++++++++++++++++++++++++++++++++
 tools/include/xentoolcore_internal.h |   2 +-
 tools/libs/evtchn/minios.c           |   2 +-
 tools/libs/light/libxl_qmp.c         |   2 +-
 7 files changed, 515 insertions(+), 515 deletions(-)

diff --git a/tools/include/Makefile b/tools/include/Makefile
index 3a03a0b0fa..b488f7ca9f 100644
--- a/tools/include/Makefile
+++ b/tools/include/Makefile
@@ -70,13 +70,13 @@ install: all
        $(INSTALL_DATA) xen/io/*.h $(DESTDIR)$(includedir)/xen/io
        $(INSTALL_DATA) xen/sys/*.h $(DESTDIR)$(includedir)/xen/sys
        $(INSTALL_DATA) xen/xsm/*.h $(DESTDIR)$(includedir)/xen/xsm
-       $(INSTALL_DATA) _xen_list.h $(DESTDIR)$(includedir)
+       $(INSTALL_DATA) xen_list.h $(DESTDIR)$(includedir)
 
 .PHONY: uninstall
 uninstall:
        echo "[FIXME] uninstall headers"
        rm -rf $(DESTDIR)$(includedir)/xen
-       rm -f $(DESTDIR)$(includedir)/_xen_list.h
+       rm -f $(DESTDIR)$(includedir)/xen_list.h
 
 .PHONY: clean
 clean:
diff --git a/tools/include/_xen_list.h b/tools/include/_xen_list.h
deleted file mode 100644
index ce246f95c9..0000000000
--- a/tools/include/_xen_list.h
+++ /dev/null
@@ -1,509 +0,0 @@
-/*-
- * Copyright (c) 1991, 1993
- *     The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *     @(#)queue.h     8.5 (Berkeley) 8/20/94
- * $FreeBSD$
- */
-
-#ifndef XEN__SYS_QUEUE_H_
-#define        XEN__SYS_QUEUE_H_
-
-/* #include <sys/cdefs.h> */
-
-/*
- * This file defines four types of data structures: singly-linked lists,
- * singly-linked tail queues, lists and tail queues.
- *
- * A singly-linked list is headed by a single forward pointer. The elements
- * are singly linked for minimum space and pointer manipulation overhead at
- * the expense of O(n) removal for arbitrary elements. New elements can be
- * added to the list after an existing element or at the head of the list.
- * Elements being removed from the head of the list should use the explicit
- * macro for this purpose for optimum efficiency. A singly-linked list may
- * only be traversed in the forward direction.  Singly-linked lists are ideal
- * for applications with large datasets and few or no removals or for
- * implementing a LIFO queue.
- *
- * A singly-linked tail queue is headed by a pair of pointers, one to the
- * head of the list and the other to the tail of the list. The elements are
- * singly linked for minimum space and pointer manipulation overhead at the
- * expense of O(n) removal for arbitrary elements. New elements can be added
- * to the list after an existing element, at the head of the list, or at the
- * end of the list. Elements being removed from the head of the tail queue
- * should use the explicit macro for this purpose for optimum efficiency.
- * A singly-linked tail queue may only be traversed in the forward direction.
- * Singly-linked tail queues are ideal for applications with large datasets
- * and few or no removals or for implementing a FIFO queue.
- *
- * A list is headed by a single forward pointer (or an array of forward
- * pointers for a hash table header). The elements are doubly linked
- * so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before
- * or after an existing element or at the head of the list. A list
- * may only be traversed in the forward direction.
- *
- * A tail queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or
- * after an existing element, at the head of the list, or at the end of
- * the list. A tail queue may be traversed in either direction.
- *
- * For details on the use of these macros, see the queue(3) manual page.
- *
- *
- *                             XEN_SLIST       XEN_LIST        XEN_STAILQ      
XEN_TAILQ
- * _HEAD                       +       +       +       +
- * _HEAD_INITIALIZER           +       +       +       +
- * _ENTRY                      +       +       +       +
- * _INIT                       +       +       +       +
- * _EMPTY                      +       +       +       +
- * _FIRST                      +       +       +       +
- * _NEXT                       +       +       +       +
- * _PREV                       -       -       -       +
- * _LAST                       -       -       +       +
- * _FOREACH                    +       +       +       +
- * _FOREACH_SAFE               +       +       +       +
- * _FOREACH_REVERSE            -       -       -       +
- * _FOREACH_REVERSE_SAFE       -       -       -       +
- * _INSERT_HEAD                        +       +       +       +
- * _INSERT_BEFORE              -       +       -       +
- * _INSERT_AFTER               +       +       +       +
- * _INSERT_TAIL                        -       -       +       +
- * _CONCAT                     -       -       +       +
- * _REMOVE_AFTER               +       -       +       -
- * _REMOVE_HEAD                        +       -       +       -
- * _REMOVE                     +       +       +       +
- * _SWAP                       +       +       +       +
- *
- */
-
-/*
- * Singly-linked List declarations.
- */
-#define        XEN_SLIST_HEAD(name, type)                                      
\
-struct name {                                                          \
-       type *slh_first;        /* first element */                     \
-}
-
-#define        XEN_SLIST_HEAD_INITIALIZER(head)                                
\
-       { 0 }
-
-#define        XEN_SLIST_ENTRY(type)                                           
\
-struct {                                                               \
-       type *sle_next; /* next element */                              \
-}
-
-/*
- * Singly-linked List functions.
- */
-#define        XEN_SLIST_EMPTY(head)   ((head)->slh_first == 0)
-
-#define        XEN_SLIST_FIRST(head)   ((head)->slh_first)
-
-#define        XEN_SLIST_FOREACH(var, head, field)                             
\
-       for ((var) = XEN_SLIST_FIRST((head));                           \
-           (var);                                                      \
-           (var) = XEN_SLIST_NEXT((var), field))
-
-#define        XEN_SLIST_FOREACH_SAFE(var, head, field, tvar)                  
\
-       for ((var) = XEN_SLIST_FIRST((head));                           \
-           (var) && ((tvar) = XEN_SLIST_NEXT((var), field), 1);        \
-           (var) = (tvar))
-
-#define        XEN_SLIST_FOREACH_PREVPTR(var, varp, head, field)               
\
-       for ((varp) = &XEN_SLIST_FIRST((head));                         \
-           ((var) = *(varp)) != 0;                                     \
-           (varp) = &XEN_SLIST_NEXT((var), field))
-
-#define        XEN_SLIST_INIT(head) do {                                       
\
-       XEN_SLIST_FIRST((head)) = 0;                                    \
-} while (0)
-
-#define        XEN_SLIST_INSERT_AFTER(slistelm, elm, field) do {               
\
-       XEN_SLIST_NEXT((elm), field) = XEN_SLIST_NEXT((slistelm), field);\
-       XEN_SLIST_NEXT((slistelm), field) = (elm);                      \
-} while (0)
-
-#define        XEN_SLIST_INSERT_HEAD(head, elm, field) do {                    
\
-       XEN_SLIST_NEXT((elm), field) = XEN_SLIST_FIRST((head));         \
-       XEN_SLIST_FIRST((head)) = (elm);                                \
-} while (0)
-
-#define        XEN_SLIST_NEXT(elm, field)      ((elm)->field.sle_next)
-
-#define        XEN_SLIST_REMOVE(head, elm, type, field) do {                   
\
-       if (XEN_SLIST_FIRST((head)) == (elm)) {                         \
-               XEN_SLIST_REMOVE_HEAD((head), field);                   \
-       }                                                               \
-       else {                                                          \
-               type *curelm = XEN_SLIST_FIRST((head));                 \
-               while (XEN_SLIST_NEXT(curelm, field) != (elm))          \
-                       curelm = XEN_SLIST_NEXT(curelm, field);         \
-               XEN_SLIST_REMOVE_AFTER(curelm, field);                  \
-       }                                                               \
-} while (0)
-
-#define XEN_SLIST_REMOVE_AFTER(elm, field) do {                                
\
-       XEN_SLIST_NEXT(elm, field) =                                    \
-           XEN_SLIST_NEXT(XEN_SLIST_NEXT(elm, field), field);          \
-} while (0)
-
-#define        XEN_SLIST_REMOVE_HEAD(head, field) do {                         
\
-       XEN_SLIST_FIRST((head)) = XEN_SLIST_NEXT(XEN_SLIST_FIRST((head)), 
field);\
-} while (0)
-
-#define XEN_SLIST_SWAP(head1, head2, type) do {                                
\
-       type *swap_first = XEN_SLIST_FIRST(head1);                      \
-       XEN_SLIST_FIRST(head1) = XEN_SLIST_FIRST(head2);                \
-       XEN_SLIST_FIRST(head2) = swap_first;                            \
-} while (0)
-
-/*
- * Singly-linked Tail queue declarations.
- */
-#define        XEN_STAILQ_HEAD(name, type)                                     
\
-struct name {                                                          \
-       type *stqh_first;/* first element */                            \
-       type **stqh_last;/* addr of last next element */                \
-}
-
-#define        XEN_STAILQ_HEAD_INITIALIZER(head)                               
\
-       { 0, &(head).stqh_first }
-
-#define        XEN_STAILQ_ENTRY(type)                                          
\
-struct {                                                               \
-       type *stqe_next;        /* next element */                      \
-}
-
-/*
- * Singly-linked Tail queue functions.
- */
-#define        XEN_STAILQ_CONCAT(head1, head2) do {                            
\
-       if (!XEN_STAILQ_EMPTY((head2))) {                               \
-               *(head1)->stqh_last = (head2)->stqh_first;              \
-               (head1)->stqh_last = (head2)->stqh_last;                \
-               XEN_STAILQ_INIT((head2));                               \
-       }                                                               \
-} while (0)
-
-#define        XEN_STAILQ_EMPTY(head)  ((head)->stqh_first == 0)
-
-#define        XEN_STAILQ_FIRST(head)  ((head)->stqh_first)
-
-#define        XEN_STAILQ_FOREACH(var, head, field)                            
\
-       for((var) = XEN_STAILQ_FIRST((head));                           \
-          (var);                                                       \
-          (var) = XEN_STAILQ_NEXT((var), field))
-
-
-#define        XEN_STAILQ_FOREACH_SAFE(var, head, field, tvar)                 
\
-       for ((var) = XEN_STAILQ_FIRST((head));                          \
-           (var) && ((tvar) = XEN_STAILQ_NEXT((var), field), 1);       \
-           (var) = (tvar))
-
-#define        XEN_STAILQ_INIT(head) do {                                      
\
-       XEN_STAILQ_FIRST((head)) = 0;                                   \
-       (head)->stqh_last = &XEN_STAILQ_FIRST((head));                  \
-} while (0)
-
-#define        XEN_STAILQ_INSERT_AFTER(head, tqelm, elm, field) do {           
\
-       if ((XEN_STAILQ_NEXT((elm), field) = XEN_STAILQ_NEXT((tqelm), field)) 
== 0)\
-               (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);     \
-       XEN_STAILQ_NEXT((tqelm), field) = (elm);                        \
-} while (0)
-
-#define        XEN_STAILQ_INSERT_HEAD(head, elm, field) do {                   
\
-       if ((XEN_STAILQ_NEXT((elm), field) = XEN_STAILQ_FIRST((head))) == 0)\
-               (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);     \
-       XEN_STAILQ_FIRST((head)) = (elm);                               \
-} while (0)
-
-#define        XEN_STAILQ_INSERT_TAIL(head, elm, field) do {                   
\
-       XEN_STAILQ_NEXT((elm), field) = 0;                              \
-       *(head)->stqh_last = (elm);                                     \
-       (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);             \
-} while (0)
-
-#define        XEN_STAILQ_LAST(head, type, field)                              
\
-       (XEN_STAILQ_EMPTY((head)) ?                                     \
-               0 :                                                     \
-               ((type *)(void *)                                       \
-               ((char *)((head)->stqh_last) - offsetof(type, field))))
-
-#define        XEN_STAILQ_NEXT(elm, field)     ((elm)->field.stqe_next)
-
-#define        XEN_STAILQ_REMOVE(head, elm, type, field) do {                  
\
-       if (XEN_STAILQ_FIRST((head)) == (elm)) {                        \
-               XEN_STAILQ_REMOVE_HEAD((head), field);                  \
-       }                                                               \
-       else {                                                          \
-               type *curelm = XEN_STAILQ_FIRST((head));                \
-               while (XEN_STAILQ_NEXT(curelm, field) != (elm))         \
-                       curelm = XEN_STAILQ_NEXT(curelm, field);        \
-               XEN_STAILQ_REMOVE_AFTER(head, curelm, field);           \
-       }                                                               \
-} while (0)
-
-#define XEN_STAILQ_REMOVE_AFTER(head, elm, field) do {                 \
-       if ((XEN_STAILQ_NEXT(elm, field) =                              \
-            XEN_STAILQ_NEXT(XEN_STAILQ_NEXT(elm, field), field)) == 0) \
-               (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);     \
-} while (0)
-
-#define        XEN_STAILQ_REMOVE_HEAD(head, field) do {                        
\
-       if ((XEN_STAILQ_FIRST((head)) =                                 \
-            XEN_STAILQ_NEXT(XEN_STAILQ_FIRST((head)), field)) == 0)    \
-               (head)->stqh_last = &XEN_STAILQ_FIRST((head));          \
-} while (0)
-
-#define XEN_STAILQ_SWAP(head1, head2, type) do {                       \
-       type *swap_first = XEN_STAILQ_FIRST(head1);                     \
-       type **swap_last = (head1)->stqh_last;                          \
-       XEN_STAILQ_FIRST(head1) = XEN_STAILQ_FIRST(head2);              \
-       (head1)->stqh_last = (head2)->stqh_last;                        \
-       XEN_STAILQ_FIRST(head2) = swap_first;                           \
-       (head2)->stqh_last = swap_last;                                 \
-       if (XEN_STAILQ_EMPTY(head1))                                    \
-               (head1)->stqh_last = &XEN_STAILQ_FIRST(head1);          \
-       if (XEN_STAILQ_EMPTY(head2))                                    \
-               (head2)->stqh_last = &XEN_STAILQ_FIRST(head2);          \
-} while (0)
-
-
-/*
- * List declarations.
- */
-#define        XEN_LIST_HEAD(name, type)                                       
\
-struct name {                                                          \
-       type *lh_first; /* first element */                             \
-}
-
-#define        XEN_LIST_HEAD_INITIALIZER(head)                                 
\
-       { 0 }
-
-#define        XEN_LIST_ENTRY(type)                                            
\
-struct {                                                               \
-       type *le_next;  /* next element */                              \
-       type **le_prev; /* address of previous next element */          \
-}
-
-/*
- * List functions.
- */
-
-#define        XEN_LIST_EMPTY(head)    ((head)->lh_first == 0)
-
-#define        XEN_LIST_FIRST(head)    ((head)->lh_first)
-
-#define        XEN_LIST_FOREACH(var, head, field)                              
\
-       for ((var) = XEN_LIST_FIRST((head));                            \
-           (var);                                                      \
-           (var) = XEN_LIST_NEXT((var), field))
-
-#define        XEN_LIST_FOREACH_SAFE(var, head, field, tvar)                   
\
-       for ((var) = XEN_LIST_FIRST((head));                            \
-           (var) && ((tvar) = XEN_LIST_NEXT((var), field), 1);         \
-           (var) = (tvar))
-
-#define        XEN_LIST_INIT(head) do {                                        
\
-       XEN_LIST_FIRST((head)) = 0;                                     \
-} while (0)
-
-#define        XEN_LIST_INSERT_AFTER(listelm, elm, field) do {                 
\
-       if ((XEN_LIST_NEXT((elm), field) = XEN_LIST_NEXT((listelm), field)) != 
0)\
-               XEN_LIST_NEXT((listelm), field)->field.le_prev =        \
-                   &XEN_LIST_NEXT((elm), field);                       \
-       XEN_LIST_NEXT((listelm), field) = (elm);                        \
-       (elm)->field.le_prev = &XEN_LIST_NEXT((listelm), field);        \
-} while (0)
-
-#define        XEN_LIST_INSERT_BEFORE(listelm, elm, field) do {                
\
-       (elm)->field.le_prev = (listelm)->field.le_prev;                \
-       XEN_LIST_NEXT((elm), field) = (listelm);                        \
-       *(listelm)->field.le_prev = (elm);                              \
-       (listelm)->field.le_prev = &XEN_LIST_NEXT((elm), field);        \
-} while (0)
-
-#define        XEN_LIST_INSERT_HEAD(head, elm, field) do {                     
\
-       if ((XEN_LIST_NEXT((elm), field) = XEN_LIST_FIRST((head))) != 0)\
-               XEN_LIST_FIRST((head))->field.le_prev = &XEN_LIST_NEXT((elm), 
field);\
-       XEN_LIST_FIRST((head)) = (elm);                                 \
-       (elm)->field.le_prev = &XEN_LIST_FIRST((head));                 \
-} while (0)
-
-#define        XEN_LIST_NEXT(elm, field)       ((elm)->field.le_next)
-
-#define        XEN_LIST_REMOVE(elm, field) do {                                
\
-       if (XEN_LIST_NEXT((elm), field) != 0)                           \
-               XEN_LIST_NEXT((elm), field)->field.le_prev =            \
-                   (elm)->field.le_prev;                               \
-       *(elm)->field.le_prev = XEN_LIST_NEXT((elm), field);            \
-} while (0)
-
-#define XEN_LIST_SWAP(head1, head2, type, field) do {                  \
-       type *swap_tmp = XEN_LIST_FIRST((head1));                       \
-       XEN_LIST_FIRST((head1)) = XEN_LIST_FIRST((head2));              \
-       XEN_LIST_FIRST((head2)) = swap_tmp;                             \
-       if ((swap_tmp = XEN_LIST_FIRST((head1))) != 0)                  \
-               swap_tmp->field.le_prev = &XEN_LIST_FIRST((head1));     \
-       if ((swap_tmp = XEN_LIST_FIRST((head2))) != 0)                  \
-               swap_tmp->field.le_prev = &XEN_LIST_FIRST((head2));     \
-} while (0)
-
-/*
- * Tail queue declarations.
- */
-#define        XEN_TAILQ_HEAD(name, type)                                      
\
-struct name {                                                          \
-       type *tqh_first;        /* first element */                     \
-       type **tqh_last;        /* addr of last next element */         \
-}
-
-#define        XEN_TAILQ_HEAD_INITIALIZER(head)                                
\
-       { 0, &(head).tqh_first }
-
-#define        XEN_TAILQ_ENTRY(type)                                           
\
-struct {                                                               \
-       type *tqe_next; /* next element */                              \
-       type **tqe_prev;        /* address of previous next element */  \
-}
-
-/*
- * Tail queue functions.
- */
-
-#define        XEN_TAILQ_CONCAT(head1, head2, field) do {                      
\
-       if (!XEN_TAILQ_EMPTY(head2)) {                                  \
-               *(head1)->tqh_last = (head2)->tqh_first;                \
-               (head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
-               (head1)->tqh_last = (head2)->tqh_last;                  \
-               XEN_TAILQ_INIT((head2));                                \
-       }                                                               \
-} while (0)
-
-#define        XEN_TAILQ_EMPTY(head)   ((head)->tqh_first == 0)
-
-#define        XEN_TAILQ_FIRST(head)   ((head)->tqh_first)
-
-#define        XEN_TAILQ_FOREACH(var, head, field)                             
\
-       for ((var) = XEN_TAILQ_FIRST((head));                           \
-           (var);                                                      \
-           (var) = XEN_TAILQ_NEXT((var), field))
-
-#define        XEN_TAILQ_FOREACH_SAFE(var, head, field, tvar)                  
\
-       for ((var) = XEN_TAILQ_FIRST((head));                           \
-           (var) && ((tvar) = XEN_TAILQ_NEXT((var), field), 1);        \
-           (var) = (tvar))
-
-#define        XEN_TAILQ_FOREACH_REVERSE(var, head, headname, field)           
\
-       for ((var) = XEN_TAILQ_LAST((head), headname);                  \
-           (var);                                                      \
-           (var) = XEN_TAILQ_PREV((var), headname, field))
-
-#define        XEN_TAILQ_FOREACH_REVERSE_SAFE(var, head, headname, field, 
tvar)        \
-       for ((var) = XEN_TAILQ_LAST((head), headname);                  \
-           (var) && ((tvar) = XEN_TAILQ_PREV((var), headname, field), 1);\
-           (var) = (tvar))
-
-#define        XEN_TAILQ_INIT(head) do {                                       
\
-       XEN_TAILQ_FIRST((head)) = 0;                                    \
-       (head)->tqh_last = &XEN_TAILQ_FIRST((head));                    \
-} while (0)
-
-#define        XEN_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {          
\
-       if ((XEN_TAILQ_NEXT((elm), field) = XEN_TAILQ_NEXT((listelm), field)) 
!= 0)\
-               XEN_TAILQ_NEXT((elm), field)->field.tqe_prev =          \
-                   &XEN_TAILQ_NEXT((elm), field);                      \
-       else {                                                          \
-               (head)->tqh_last = &XEN_TAILQ_NEXT((elm), field);       \
-       }                                                               \
-       XEN_TAILQ_NEXT((listelm), field) = (elm);                       \
-       (elm)->field.tqe_prev = &XEN_TAILQ_NEXT((listelm), field);      \
-} while (0)
-
-#define        XEN_TAILQ_INSERT_BEFORE(listelm, elm, field) do {               
\
-       (elm)->field.tqe_prev = (listelm)->field.tqe_prev;              \
-       XEN_TAILQ_NEXT((elm), field) = (listelm);                       \
-       *(listelm)->field.tqe_prev = (elm);                             \
-       (listelm)->field.tqe_prev = &XEN_TAILQ_NEXT((elm), field);      \
-} while (0)
-
-#define        XEN_TAILQ_INSERT_HEAD(head, elm, field) do {                    
\
-       if ((XEN_TAILQ_NEXT((elm), field) = XEN_TAILQ_FIRST((head))) != 0)\
-               XEN_TAILQ_FIRST((head))->field.tqe_prev =               \
-                   &XEN_TAILQ_NEXT((elm), field);                      \
-       else                                                            \
-               (head)->tqh_last = &XEN_TAILQ_NEXT((elm), field);       \
-       XEN_TAILQ_FIRST((head)) = (elm);                                \
-       (elm)->field.tqe_prev = &XEN_TAILQ_FIRST((head));               \
-} while (0)
-
-#define        XEN_TAILQ_INSERT_TAIL(head, elm, field) do {                    
\
-       XEN_TAILQ_NEXT((elm), field) = 0;                               \
-       (elm)->field.tqe_prev = (head)->tqh_last;                       \
-       *(head)->tqh_last = (elm);                                      \
-       (head)->tqh_last = &XEN_TAILQ_NEXT((elm), field);               \
-} while (0)
-
-#define        XEN_TAILQ_LAST(head, headname)                                  
\
-       (*(((struct headname *)((head)->tqh_last))->tqh_last))
-
-#define        XEN_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
-
-#define        XEN_TAILQ_PREV(elm, headname, field)                            
\
-       (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-
-#define        XEN_TAILQ_REMOVE(head, elm, field) do {                         
\
-       if ((XEN_TAILQ_NEXT((elm), field)) != 0)                        \
-               XEN_TAILQ_NEXT((elm), field)->field.tqe_prev =          \
-                   (elm)->field.tqe_prev;                              \
-       else {                                                          \
-               (head)->tqh_last = (elm)->field.tqe_prev;               \
-       }                                                               \
-       *(elm)->field.tqe_prev = XEN_TAILQ_NEXT((elm), field);          \
-} while (0)
-
-#define XEN_TAILQ_SWAP(head1, head2, type, field) do {                 \
-       type *swap_first = (head1)->tqh_first;                          \
-       type **swap_last = (head1)->tqh_last;                           \
-       (head1)->tqh_first = (head2)->tqh_first;                        \
-       (head1)->tqh_last = (head2)->tqh_last;                          \
-       (head2)->tqh_first = swap_first;                                \
-       (head2)->tqh_last = swap_last;                                  \
-       if ((swap_first = (head1)->tqh_first) != 0)                     \
-               swap_first->field.tqe_prev = &(head1)->tqh_first;       \
-       else                                                            \
-               (head1)->tqh_last = &(head1)->tqh_first;                \
-       if ((swap_first = (head2)->tqh_first) != 0)                     \
-               swap_first->field.tqe_prev = &(head2)->tqh_first;       \
-       else                                                            \
-               (head2)->tqh_last = &(head2)->tqh_first;                \
-} while (0)
-
-#endif /* !XEN__SYS_QUEUE_H_ */
diff --git a/tools/include/libxl.h b/tools/include/libxl.h
index 51a9b6cfac..7ce978e83c 100644
--- a/tools/include/libxl.h
+++ b/tools/include/libxl.h
@@ -747,7 +747,7 @@
 typedef struct libxl__ctx libxl_ctx;
 
 #include <libxl_uuid.h>
-#include <_xen_list.h>
+#include <xen_list.h>
 
 /* API compatibility. */
 #ifdef LIBXL_API_VERSION
diff --git a/tools/include/xen_list.h b/tools/include/xen_list.h
new file mode 100644
index 0000000000..ce246f95c9
--- /dev/null
+++ b/tools/include/xen_list.h
@@ -0,0 +1,509 @@
+/*-
+ * Copyright (c) 1991, 1993
+ *     The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *     @(#)queue.h     8.5 (Berkeley) 8/20/94
+ * $FreeBSD$
+ */
+
+#ifndef XEN__SYS_QUEUE_H_
+#define        XEN__SYS_QUEUE_H_
+
+/* #include <sys/cdefs.h> */
+
+/*
+ * This file defines four types of data structures: singly-linked lists,
+ * singly-linked tail queues, lists and tail queues.
+ *
+ * A singly-linked list is headed by a single forward pointer. The elements
+ * are singly linked for minimum space and pointer manipulation overhead at
+ * the expense of O(n) removal for arbitrary elements. New elements can be
+ * added to the list after an existing element or at the head of the list.
+ * Elements being removed from the head of the list should use the explicit
+ * macro for this purpose for optimum efficiency. A singly-linked list may
+ * only be traversed in the forward direction.  Singly-linked lists are ideal
+ * for applications with large datasets and few or no removals or for
+ * implementing a LIFO queue.
+ *
+ * A singly-linked tail queue is headed by a pair of pointers, one to the
+ * head of the list and the other to the tail of the list. The elements are
+ * singly linked for minimum space and pointer manipulation overhead at the
+ * expense of O(n) removal for arbitrary elements. New elements can be added
+ * to the list after an existing element, at the head of the list, or at the
+ * end of the list. Elements being removed from the head of the tail queue
+ * should use the explicit macro for this purpose for optimum efficiency.
+ * A singly-linked tail queue may only be traversed in the forward direction.
+ * Singly-linked tail queues are ideal for applications with large datasets
+ * and few or no removals or for implementing a FIFO queue.
+ *
+ * A list is headed by a single forward pointer (or an array of forward
+ * pointers for a hash table header). The elements are doubly linked
+ * so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before
+ * or after an existing element or at the head of the list. A list
+ * may only be traversed in the forward direction.
+ *
+ * A tail queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or
+ * after an existing element, at the head of the list, or at the end of
+ * the list. A tail queue may be traversed in either direction.
+ *
+ * For details on the use of these macros, see the queue(3) manual page.
+ *
+ *
+ *                             XEN_SLIST       XEN_LIST        XEN_STAILQ      
XEN_TAILQ
+ * _HEAD                       +       +       +       +
+ * _HEAD_INITIALIZER           +       +       +       +
+ * _ENTRY                      +       +       +       +
+ * _INIT                       +       +       +       +
+ * _EMPTY                      +       +       +       +
+ * _FIRST                      +       +       +       +
+ * _NEXT                       +       +       +       +
+ * _PREV                       -       -       -       +
+ * _LAST                       -       -       +       +
+ * _FOREACH                    +       +       +       +
+ * _FOREACH_SAFE               +       +       +       +
+ * _FOREACH_REVERSE            -       -       -       +
+ * _FOREACH_REVERSE_SAFE       -       -       -       +
+ * _INSERT_HEAD                        +       +       +       +
+ * _INSERT_BEFORE              -       +       -       +
+ * _INSERT_AFTER               +       +       +       +
+ * _INSERT_TAIL                        -       -       +       +
+ * _CONCAT                     -       -       +       +
+ * _REMOVE_AFTER               +       -       +       -
+ * _REMOVE_HEAD                        +       -       +       -
+ * _REMOVE                     +       +       +       +
+ * _SWAP                       +       +       +       +
+ *
+ */
+
+/*
+ * Singly-linked List declarations.
+ */
+#define        XEN_SLIST_HEAD(name, type)                                      
\
+struct name {                                                          \
+       type *slh_first;        /* first element */                     \
+}
+
+#define        XEN_SLIST_HEAD_INITIALIZER(head)                                
\
+       { 0 }
+
+#define        XEN_SLIST_ENTRY(type)                                           
\
+struct {                                                               \
+       type *sle_next; /* next element */                              \
+}
+
+/*
+ * Singly-linked List functions.
+ */
+#define        XEN_SLIST_EMPTY(head)   ((head)->slh_first == 0)
+
+#define        XEN_SLIST_FIRST(head)   ((head)->slh_first)
+
+#define        XEN_SLIST_FOREACH(var, head, field)                             
\
+       for ((var) = XEN_SLIST_FIRST((head));                           \
+           (var);                                                      \
+           (var) = XEN_SLIST_NEXT((var), field))
+
+#define        XEN_SLIST_FOREACH_SAFE(var, head, field, tvar)                  
\
+       for ((var) = XEN_SLIST_FIRST((head));                           \
+           (var) && ((tvar) = XEN_SLIST_NEXT((var), field), 1);        \
+           (var) = (tvar))
+
+#define        XEN_SLIST_FOREACH_PREVPTR(var, varp, head, field)               
\
+       for ((varp) = &XEN_SLIST_FIRST((head));                         \
+           ((var) = *(varp)) != 0;                                     \
+           (varp) = &XEN_SLIST_NEXT((var), field))
+
+#define        XEN_SLIST_INIT(head) do {                                       
\
+       XEN_SLIST_FIRST((head)) = 0;                                    \
+} while (0)
+
+#define        XEN_SLIST_INSERT_AFTER(slistelm, elm, field) do {               
\
+       XEN_SLIST_NEXT((elm), field) = XEN_SLIST_NEXT((slistelm), field);\
+       XEN_SLIST_NEXT((slistelm), field) = (elm);                      \
+} while (0)
+
+#define        XEN_SLIST_INSERT_HEAD(head, elm, field) do {                    
\
+       XEN_SLIST_NEXT((elm), field) = XEN_SLIST_FIRST((head));         \
+       XEN_SLIST_FIRST((head)) = (elm);                                \
+} while (0)
+
+#define        XEN_SLIST_NEXT(elm, field)      ((elm)->field.sle_next)
+
+#define        XEN_SLIST_REMOVE(head, elm, type, field) do {                   
\
+       if (XEN_SLIST_FIRST((head)) == (elm)) {                         \
+               XEN_SLIST_REMOVE_HEAD((head), field);                   \
+       }                                                               \
+       else {                                                          \
+               type *curelm = XEN_SLIST_FIRST((head));                 \
+               while (XEN_SLIST_NEXT(curelm, field) != (elm))          \
+                       curelm = XEN_SLIST_NEXT(curelm, field);         \
+               XEN_SLIST_REMOVE_AFTER(curelm, field);                  \
+       }                                                               \
+} while (0)
+
+#define XEN_SLIST_REMOVE_AFTER(elm, field) do {                                
\
+       XEN_SLIST_NEXT(elm, field) =                                    \
+           XEN_SLIST_NEXT(XEN_SLIST_NEXT(elm, field), field);          \
+} while (0)
+
+#define        XEN_SLIST_REMOVE_HEAD(head, field) do {                         
\
+       XEN_SLIST_FIRST((head)) = XEN_SLIST_NEXT(XEN_SLIST_FIRST((head)), 
field);\
+} while (0)
+
+#define XEN_SLIST_SWAP(head1, head2, type) do {                                
\
+       type *swap_first = XEN_SLIST_FIRST(head1);                      \
+       XEN_SLIST_FIRST(head1) = XEN_SLIST_FIRST(head2);                \
+       XEN_SLIST_FIRST(head2) = swap_first;                            \
+} while (0)
+
+/*
+ * Singly-linked Tail queue declarations.
+ */
+#define        XEN_STAILQ_HEAD(name, type)                                     
\
+struct name {                                                          \
+       type *stqh_first;/* first element */                            \
+       type **stqh_last;/* addr of last next element */                \
+}
+
+#define        XEN_STAILQ_HEAD_INITIALIZER(head)                               
\
+       { 0, &(head).stqh_first }
+
+#define        XEN_STAILQ_ENTRY(type)                                          
\
+struct {                                                               \
+       type *stqe_next;        /* next element */                      \
+}
+
+/*
+ * Singly-linked Tail queue functions.
+ */
+#define        XEN_STAILQ_CONCAT(head1, head2) do {                            
\
+       if (!XEN_STAILQ_EMPTY((head2))) {                               \
+               *(head1)->stqh_last = (head2)->stqh_first;              \
+               (head1)->stqh_last = (head2)->stqh_last;                \
+               XEN_STAILQ_INIT((head2));                               \
+       }                                                               \
+} while (0)
+
+#define        XEN_STAILQ_EMPTY(head)  ((head)->stqh_first == 0)
+
+#define        XEN_STAILQ_FIRST(head)  ((head)->stqh_first)
+
+#define        XEN_STAILQ_FOREACH(var, head, field)                            
\
+       for((var) = XEN_STAILQ_FIRST((head));                           \
+          (var);                                                       \
+          (var) = XEN_STAILQ_NEXT((var), field))
+
+
+#define        XEN_STAILQ_FOREACH_SAFE(var, head, field, tvar)                 
\
+       for ((var) = XEN_STAILQ_FIRST((head));                          \
+           (var) && ((tvar) = XEN_STAILQ_NEXT((var), field), 1);       \
+           (var) = (tvar))
+
+#define        XEN_STAILQ_INIT(head) do {                                      
\
+       XEN_STAILQ_FIRST((head)) = 0;                                   \
+       (head)->stqh_last = &XEN_STAILQ_FIRST((head));                  \
+} while (0)
+
+#define        XEN_STAILQ_INSERT_AFTER(head, tqelm, elm, field) do {           
\
+       if ((XEN_STAILQ_NEXT((elm), field) = XEN_STAILQ_NEXT((tqelm), field)) 
== 0)\
+               (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);     \
+       XEN_STAILQ_NEXT((tqelm), field) = (elm);                        \
+} while (0)
+
+#define        XEN_STAILQ_INSERT_HEAD(head, elm, field) do {                   
\
+       if ((XEN_STAILQ_NEXT((elm), field) = XEN_STAILQ_FIRST((head))) == 0)\
+               (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);     \
+       XEN_STAILQ_FIRST((head)) = (elm);                               \
+} while (0)
+
+#define        XEN_STAILQ_INSERT_TAIL(head, elm, field) do {                   
\
+       XEN_STAILQ_NEXT((elm), field) = 0;                              \
+       *(head)->stqh_last = (elm);                                     \
+       (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);             \
+} while (0)
+
+#define        XEN_STAILQ_LAST(head, type, field)                              
\
+       (XEN_STAILQ_EMPTY((head)) ?                                     \
+               0 :                                                     \
+               ((type *)(void *)                                       \
+               ((char *)((head)->stqh_last) - offsetof(type, field))))
+
+#define        XEN_STAILQ_NEXT(elm, field)     ((elm)->field.stqe_next)
+
+#define        XEN_STAILQ_REMOVE(head, elm, type, field) do {                  
\
+       if (XEN_STAILQ_FIRST((head)) == (elm)) {                        \
+               XEN_STAILQ_REMOVE_HEAD((head), field);                  \
+       }                                                               \
+       else {                                                          \
+               type *curelm = XEN_STAILQ_FIRST((head));                \
+               while (XEN_STAILQ_NEXT(curelm, field) != (elm))         \
+                       curelm = XEN_STAILQ_NEXT(curelm, field);        \
+               XEN_STAILQ_REMOVE_AFTER(head, curelm, field);           \
+       }                                                               \
+} while (0)
+
+#define XEN_STAILQ_REMOVE_AFTER(head, elm, field) do {                 \
+       if ((XEN_STAILQ_NEXT(elm, field) =                              \
+            XEN_STAILQ_NEXT(XEN_STAILQ_NEXT(elm, field), field)) == 0) \
+               (head)->stqh_last = &XEN_STAILQ_NEXT((elm), field);     \
+} while (0)
+
+#define        XEN_STAILQ_REMOVE_HEAD(head, field) do {                        
\
+       if ((XEN_STAILQ_FIRST((head)) =                                 \
+            XEN_STAILQ_NEXT(XEN_STAILQ_FIRST((head)), field)) == 0)    \
+               (head)->stqh_last = &XEN_STAILQ_FIRST((head));          \
+} while (0)
+
+#define XEN_STAILQ_SWAP(head1, head2, type) do {                       \
+       type *swap_first = XEN_STAILQ_FIRST(head1);                     \
+       type **swap_last = (head1)->stqh_last;                          \
+       XEN_STAILQ_FIRST(head1) = XEN_STAILQ_FIRST(head2);              \
+       (head1)->stqh_last = (head2)->stqh_last;                        \
+       XEN_STAILQ_FIRST(head2) = swap_first;                           \
+       (head2)->stqh_last = swap_last;                                 \
+       if (XEN_STAILQ_EMPTY(head1))                                    \
+               (head1)->stqh_last = &XEN_STAILQ_FIRST(head1);          \
+       if (XEN_STAILQ_EMPTY(head2))                                    \
+               (head2)->stqh_last = &XEN_STAILQ_FIRST(head2);          \
+} while (0)
+
+
+/*
+ * List declarations.
+ */
+#define        XEN_LIST_HEAD(name, type)                                       
\
+struct name {                                                          \
+       type *lh_first; /* first element */                             \
+}
+
+#define        XEN_LIST_HEAD_INITIALIZER(head)                                 
\
+       { 0 }
+
+#define        XEN_LIST_ENTRY(type)                                            
\
+struct {                                                               \
+       type *le_next;  /* next element */                              \
+       type **le_prev; /* address of previous next element */          \
+}
+
+/*
+ * List functions.
+ */
+
+#define        XEN_LIST_EMPTY(head)    ((head)->lh_first == 0)
+
+#define        XEN_LIST_FIRST(head)    ((head)->lh_first)
+
+#define        XEN_LIST_FOREACH(var, head, field)                              
\
+       for ((var) = XEN_LIST_FIRST((head));                            \
+           (var);                                                      \
+           (var) = XEN_LIST_NEXT((var), field))
+
+#define        XEN_LIST_FOREACH_SAFE(var, head, field, tvar)                   
\
+       for ((var) = XEN_LIST_FIRST((head));                            \
+           (var) && ((tvar) = XEN_LIST_NEXT((var), field), 1);         \
+           (var) = (tvar))
+
+#define        XEN_LIST_INIT(head) do {                                        
\
+       XEN_LIST_FIRST((head)) = 0;                                     \
+} while (0)
+
+#define        XEN_LIST_INSERT_AFTER(listelm, elm, field) do {                 
\
+       if ((XEN_LIST_NEXT((elm), field) = XEN_LIST_NEXT((listelm), field)) != 
0)\
+               XEN_LIST_NEXT((listelm), field)->field.le_prev =        \
+                   &XEN_LIST_NEXT((elm), field);                       \
+       XEN_LIST_NEXT((listelm), field) = (elm);                        \
+       (elm)->field.le_prev = &XEN_LIST_NEXT((listelm), field);        \
+} while (0)
+
+#define        XEN_LIST_INSERT_BEFORE(listelm, elm, field) do {                
\
+       (elm)->field.le_prev = (listelm)->field.le_prev;                \
+       XEN_LIST_NEXT((elm), field) = (listelm);                        \
+       *(listelm)->field.le_prev = (elm);                              \
+       (listelm)->field.le_prev = &XEN_LIST_NEXT((elm), field);        \
+} while (0)
+
+#define        XEN_LIST_INSERT_HEAD(head, elm, field) do {                     
\
+       if ((XEN_LIST_NEXT((elm), field) = XEN_LIST_FIRST((head))) != 0)\
+               XEN_LIST_FIRST((head))->field.le_prev = &XEN_LIST_NEXT((elm), 
field);\
+       XEN_LIST_FIRST((head)) = (elm);                                 \
+       (elm)->field.le_prev = &XEN_LIST_FIRST((head));                 \
+} while (0)
+
+#define        XEN_LIST_NEXT(elm, field)       ((elm)->field.le_next)
+
+#define        XEN_LIST_REMOVE(elm, field) do {                                
\
+       if (XEN_LIST_NEXT((elm), field) != 0)                           \
+               XEN_LIST_NEXT((elm), field)->field.le_prev =            \
+                   (elm)->field.le_prev;                               \
+       *(elm)->field.le_prev = XEN_LIST_NEXT((elm), field);            \
+} while (0)
+
+#define XEN_LIST_SWAP(head1, head2, type, field) do {                  \
+       type *swap_tmp = XEN_LIST_FIRST((head1));                       \
+       XEN_LIST_FIRST((head1)) = XEN_LIST_FIRST((head2));              \
+       XEN_LIST_FIRST((head2)) = swap_tmp;                             \
+       if ((swap_tmp = XEN_LIST_FIRST((head1))) != 0)                  \
+               swap_tmp->field.le_prev = &XEN_LIST_FIRST((head1));     \
+       if ((swap_tmp = XEN_LIST_FIRST((head2))) != 0)                  \
+               swap_tmp->field.le_prev = &XEN_LIST_FIRST((head2));     \
+} while (0)
+
+/*
+ * Tail queue declarations.
+ */
+#define        XEN_TAILQ_HEAD(name, type)                                      
\
+struct name {                                                          \
+       type *tqh_first;        /* first element */                     \
+       type **tqh_last;        /* addr of last next element */         \
+}
+
+#define        XEN_TAILQ_HEAD_INITIALIZER(head)                                
\
+       { 0, &(head).tqh_first }
+
+#define        XEN_TAILQ_ENTRY(type)                                           
\
+struct {                                                               \
+       type *tqe_next; /* next element */                              \
+       type **tqe_prev;        /* address of previous next element */  \
+}
+
+/*
+ * Tail queue functions.
+ */
+
+#define        XEN_TAILQ_CONCAT(head1, head2, field) do {                      
\
+       if (!XEN_TAILQ_EMPTY(head2)) {                                  \
+               *(head1)->tqh_last = (head2)->tqh_first;                \
+               (head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \
+               (head1)->tqh_last = (head2)->tqh_last;                  \
+               XEN_TAILQ_INIT((head2));                                \
+       }                                                               \
+} while (0)
+
+#define        XEN_TAILQ_EMPTY(head)   ((head)->tqh_first == 0)
+
+#define        XEN_TAILQ_FIRST(head)   ((head)->tqh_first)
+
+#define        XEN_TAILQ_FOREACH(var, head, field)                             
\
+       for ((var) = XEN_TAILQ_FIRST((head));                           \
+           (var);                                                      \
+           (var) = XEN_TAILQ_NEXT((var), field))
+
+#define        XEN_TAILQ_FOREACH_SAFE(var, head, field, tvar)                  
\
+       for ((var) = XEN_TAILQ_FIRST((head));                           \
+           (var) && ((tvar) = XEN_TAILQ_NEXT((var), field), 1);        \
+           (var) = (tvar))
+
+#define        XEN_TAILQ_FOREACH_REVERSE(var, head, headname, field)           
\
+       for ((var) = XEN_TAILQ_LAST((head), headname);                  \
+           (var);                                                      \
+           (var) = XEN_TAILQ_PREV((var), headname, field))
+
+#define        XEN_TAILQ_FOREACH_REVERSE_SAFE(var, head, headname, field, 
tvar)        \
+       for ((var) = XEN_TAILQ_LAST((head), headname);                  \
+           (var) && ((tvar) = XEN_TAILQ_PREV((var), headname, field), 1);\
+           (var) = (tvar))
+
+#define        XEN_TAILQ_INIT(head) do {                                       
\
+       XEN_TAILQ_FIRST((head)) = 0;                                    \
+       (head)->tqh_last = &XEN_TAILQ_FIRST((head));                    \
+} while (0)
+
+#define        XEN_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {          
\
+       if ((XEN_TAILQ_NEXT((elm), field) = XEN_TAILQ_NEXT((listelm), field)) 
!= 0)\
+               XEN_TAILQ_NEXT((elm), field)->field.tqe_prev =          \
+                   &XEN_TAILQ_NEXT((elm), field);                      \
+       else {                                                          \
+               (head)->tqh_last = &XEN_TAILQ_NEXT((elm), field);       \
+       }                                                               \
+       XEN_TAILQ_NEXT((listelm), field) = (elm);                       \
+       (elm)->field.tqe_prev = &XEN_TAILQ_NEXT((listelm), field);      \
+} while (0)
+
+#define        XEN_TAILQ_INSERT_BEFORE(listelm, elm, field) do {               
\
+       (elm)->field.tqe_prev = (listelm)->field.tqe_prev;              \
+       XEN_TAILQ_NEXT((elm), field) = (listelm);                       \
+       *(listelm)->field.tqe_prev = (elm);                             \
+       (listelm)->field.tqe_prev = &XEN_TAILQ_NEXT((elm), field);      \
+} while (0)
+
+#define        XEN_TAILQ_INSERT_HEAD(head, elm, field) do {                    
\
+       if ((XEN_TAILQ_NEXT((elm), field) = XEN_TAILQ_FIRST((head))) != 0)\
+               XEN_TAILQ_FIRST((head))->field.tqe_prev =               \
+                   &XEN_TAILQ_NEXT((elm), field);                      \
+       else                                                            \
+               (head)->tqh_last = &XEN_TAILQ_NEXT((elm), field);       \
+       XEN_TAILQ_FIRST((head)) = (elm);                                \
+       (elm)->field.tqe_prev = &XEN_TAILQ_FIRST((head));               \
+} while (0)
+
+#define        XEN_TAILQ_INSERT_TAIL(head, elm, field) do {                    
\
+       XEN_TAILQ_NEXT((elm), field) = 0;                               \
+       (elm)->field.tqe_prev = (head)->tqh_last;                       \
+       *(head)->tqh_last = (elm);                                      \
+       (head)->tqh_last = &XEN_TAILQ_NEXT((elm), field);               \
+} while (0)
+
+#define        XEN_TAILQ_LAST(head, headname)                                  
\
+       (*(((struct headname *)((head)->tqh_last))->tqh_last))
+
+#define        XEN_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
+
+#define        XEN_TAILQ_PREV(elm, headname, field)                            
\
+       (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
+
+#define        XEN_TAILQ_REMOVE(head, elm, field) do {                         
\
+       if ((XEN_TAILQ_NEXT((elm), field)) != 0)                        \
+               XEN_TAILQ_NEXT((elm), field)->field.tqe_prev =          \
+                   (elm)->field.tqe_prev;                              \
+       else {                                                          \
+               (head)->tqh_last = (elm)->field.tqe_prev;               \
+       }                                                               \
+       *(elm)->field.tqe_prev = XEN_TAILQ_NEXT((elm), field);          \
+} while (0)
+
+#define XEN_TAILQ_SWAP(head1, head2, type, field) do {                 \
+       type *swap_first = (head1)->tqh_first;                          \
+       type **swap_last = (head1)->tqh_last;                           \
+       (head1)->tqh_first = (head2)->tqh_first;                        \
+       (head1)->tqh_last = (head2)->tqh_last;                          \
+       (head2)->tqh_first = swap_first;                                \
+       (head2)->tqh_last = swap_last;                                  \
+       if ((swap_first = (head1)->tqh_first) != 0)                     \
+               swap_first->field.tqe_prev = &(head1)->tqh_first;       \
+       else                                                            \
+               (head1)->tqh_last = &(head1)->tqh_first;                \
+       if ((swap_first = (head2)->tqh_first) != 0)                     \
+               swap_first->field.tqe_prev = &(head2)->tqh_first;       \
+       else                                                            \
+               (head2)->tqh_last = &(head2)->tqh_first;                \
+} while (0)
+
+#endif /* !XEN__SYS_QUEUE_H_ */
diff --git a/tools/include/xentoolcore_internal.h 
b/tools/include/xentoolcore_internal.h
index deccefd612..1be014434d 100644
--- a/tools/include/xentoolcore_internal.h
+++ b/tools/include/xentoolcore_internal.h
@@ -27,7 +27,7 @@
 #include <stddef.h>
 
 #include "xentoolcore.h"
-#include "_xen_list.h"
+#include "xen_list.h"
 
 /*---------- active handle registration ----------*/
 
diff --git a/tools/libs/evtchn/minios.c b/tools/libs/evtchn/minios.c
index 8ff46de884..28743cb055 100644
--- a/tools/libs/evtchn/minios.c
+++ b/tools/libs/evtchn/minios.c
@@ -20,7 +20,7 @@
  * Split off from xc_minios.c
  */
 
-#include "_xen_list.h"
+#include "xen_list.h"
 #include <mini-os/types.h>
 #include <mini-os/os.h>
 #include <mini-os/lib.h>
diff --git a/tools/libs/light/libxl_qmp.c b/tools/libs/light/libxl_qmp.c
index 8faa102e4d..6b0cd607d8 100644
--- a/tools/libs/light/libxl_qmp.c
+++ b/tools/libs/light/libxl_qmp.c
@@ -63,7 +63,7 @@
 
 #include <yajl/yajl_gen.h>
 
-#include "_xen_list.h"
+#include "xen_list.h"
 #include "libxl_internal.h"
 
 /* #define DEBUG_RECEIVED */
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.