[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen stable-4.16] x86/spec-ctrl: Only adjust MSR_SPEC_CTRL for idle with legacy IBRS
commit 09d533f4c80b7eaf9fb4e36ebba8259580857a9d Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> AuthorDate: Tue Jul 12 11:12:46 2022 +0200 Commit: Jan Beulich <jbeulich@xxxxxxxx> CommitDate: Tue Jul 12 11:12:46 2022 +0200 x86/spec-ctrl: Only adjust MSR_SPEC_CTRL for idle with legacy IBRS Back at the time of the original Spectre-v2 fixes, it was recommended to clear MSR_SPEC_CTRL when going idle. This is because of the side effects on the sibling thread caused by the microcode IBRS and STIBP implementations which were retrofitted to existing CPUs. However, there are no relevant cross-thread impacts for the hardware IBRS/STIBP implementations, so this logic should not be used on Intel CPUs supporting eIBRS, or any AMD CPUs; doing so only adds unnecessary latency to the idle path. Furthermore, there's no point playing with MSR_SPEC_CTRL in the idle paths if SMT is disabled for other reasons. Fixes: 8d03080d2a33 ("x86/spec-ctrl: Cease using thunk=lfence on AMD") Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> master commit: ffc7694e0c99eea158c32aa164b7d1e1bb1dc46b master date: 2022-06-30 18:07:13 +0100 --- xen/arch/x86/spec_ctrl.c | 10 ++++++++-- xen/include/asm-x86/cpufeatures.h | 2 +- xen/include/asm-x86/spec_ctrl.h | 5 +++-- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/xen/arch/x86/spec_ctrl.c b/xen/arch/x86/spec_ctrl.c index 099113ba41..1ed5ceda8b 100644 --- a/xen/arch/x86/spec_ctrl.c +++ b/xen/arch/x86/spec_ctrl.c @@ -1150,8 +1150,14 @@ void __init init_speculation_mitigations(void) /* (Re)init BSP state now that default_spec_ctrl_flags has been calculated. */ init_shadow_spec_ctrl_state(); - /* If Xen is using any MSR_SPEC_CTRL settings, adjust the idle path. */ - if ( default_xen_spec_ctrl ) + /* + * For microcoded IBRS only (i.e. Intel, pre eIBRS), it is recommended to + * clear MSR_SPEC_CTRL before going idle, to avoid impacting sibling + * threads. Activate this if SMT is enabled, and Xen is using a non-zero + * MSR_SPEC_CTRL setting. + */ + if ( boot_cpu_has(X86_FEATURE_IBRSB) && !(caps & ARCH_CAPS_IBRS_ALL) && + hw_smt_enabled && default_xen_spec_ctrl ) setup_force_cpu_cap(X86_FEATURE_SC_MSR_IDLE); xpti_init_default(caps); diff --git a/xen/include/asm-x86/cpufeatures.h b/xen/include/asm-x86/cpufeatures.h index bd45a144ee..493d338a08 100644 --- a/xen/include/asm-x86/cpufeatures.h +++ b/xen/include/asm-x86/cpufeatures.h @@ -33,7 +33,7 @@ XEN_CPUFEATURE(SC_MSR_HVM, X86_SYNTH(17)) /* MSR_SPEC_CTRL used by Xen fo XEN_CPUFEATURE(SC_RSB_PV, X86_SYNTH(18)) /* RSB overwrite needed for PV */ XEN_CPUFEATURE(SC_RSB_HVM, X86_SYNTH(19)) /* RSB overwrite needed for HVM */ XEN_CPUFEATURE(XEN_SELFSNOOP, X86_SYNTH(20)) /* SELFSNOOP gets used by Xen itself */ -XEN_CPUFEATURE(SC_MSR_IDLE, X86_SYNTH(21)) /* (SC_MSR_PV || SC_MSR_HVM) && default_xen_spec_ctrl */ +XEN_CPUFEATURE(SC_MSR_IDLE, X86_SYNTH(21)) /* Clear MSR_SPEC_CTRL on idle */ XEN_CPUFEATURE(XEN_LBR, X86_SYNTH(22)) /* Xen uses MSR_DEBUGCTL.LBR */ /* Bits 23,24 unused. */ XEN_CPUFEATURE(SC_VERW_IDLE, X86_SYNTH(25)) /* VERW used by Xen for idle */ diff --git a/xen/include/asm-x86/spec_ctrl.h b/xen/include/asm-x86/spec_ctrl.h index 751355f471..7e83e0179f 100644 --- a/xen/include/asm-x86/spec_ctrl.h +++ b/xen/include/asm-x86/spec_ctrl.h @@ -78,7 +78,8 @@ static always_inline void spec_ctrl_enter_idle(struct cpu_info *info) uint32_t val = 0; /* - * Branch Target Injection: + * It is recommended in some cases to clear MSR_SPEC_CTRL when going idle, + * to avoid impacting sibling threads. * * Latch the new shadow value, then enable shadowing, then update the MSR. * There are no SMP issues here; only local processor ordering concerns. @@ -114,7 +115,7 @@ static always_inline void spec_ctrl_exit_idle(struct cpu_info *info) uint32_t val = info->xen_spec_ctrl; /* - * Branch Target Injection: + * Restore MSR_SPEC_CTRL on exit from idle. * * Disable shadowing before updating the MSR. There are no SMP issues * here; only local processor ordering concerns. -- generated by git-patchbot for /home/xen/git/xen.git#stable-4.16
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |