[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] drivers/char: reset XHCI ports when initializing dbc
commit 3a669ea835f5100b7945da7b89d461883e3add01 Author: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx> AuthorDate: Tue Aug 16 11:22:18 2022 +0200 Commit: Jan Beulich <jbeulich@xxxxxxxx> CommitDate: Tue Aug 16 11:22:18 2022 +0200 drivers/char: reset XHCI ports when initializing dbc Reset ports, to force host system to re-enumerate devices. Otheriwse it will require the cable to be re-plugged, or will wait in the "configuring" state indefinitely. Trick and code copied from Linux: drivers/usb/early/xhci-dbc.c:xdbc_start()->xdbc_reset_debug_port() Signed-off-by: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> --- xen/drivers/char/xhci-dbc.c | 75 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/xen/drivers/char/xhci-dbc.c b/xen/drivers/char/xhci-dbc.c index a16c81b9e7..8c9dfa6cfc 100644 --- a/xen/drivers/char/xhci-dbc.c +++ b/xen/drivers/char/xhci-dbc.c @@ -66,6 +66,10 @@ ((1UL << DBC_PSC_CSC) | (1UL << DBC_PSC_PRC) | (1UL << DBC_PSC_PLC) | \ (1UL << DBC_PSC_CEC)) +#define XHC_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define PORT_RESET (1 << 4) +#define PORT_CONNECT (1 << 0) + #define dbc_debug(...) printk("dbc debug: " __VA_ARGS__) #define dbc_alert(...) printk("dbc alert: " __VA_ARGS__) #define dbc_error(...) printk("dbc error: " __VA_ARGS__) @@ -666,6 +670,73 @@ static void dbc_init_strings(struct dbc *dbc, uint32_t *info) &dbc->dbc_ctx->serial_size); } +static void dbc_do_reset_debug_port(struct dbc *dbc, + unsigned int id, unsigned int count) +{ + uint32_t __iomem *ops_reg; + uint32_t __iomem *portsc; + uint32_t val, cap_length; + unsigned int i; + + cap_length = readl(dbc->xhc_mmio) & 0xff; + ops_reg = dbc->xhc_mmio + cap_length; + + id--; + for ( i = id; i < (id + count); i++ ) + { + portsc = ops_reg + 0x100 + i * 0x4; + val = readl(portsc); + if ( !(val & PORT_CONNECT) ) + writel(val | PORT_RESET, portsc); + } +} + +static void dbc_reset_debug_port(struct dbc *dbc) +{ + uint32_t val, port_offset, port_count; + uint32_t __iomem *xcap; + uint32_t xcap_val; + uint32_t next; + uint32_t id; + uint8_t __iomem *mmio = (uint8_t *)dbc->xhc_mmio; + uint32_t __iomem *hccp1 = (uint32_t *)(mmio + 0x10); + const uint32_t PROTOCOL_ID = 0x2; + int ttl = 48; + + xcap = (uint32_t *)dbc->xhc_mmio; + /* + * This is initially an offset to the first capability. All the offsets + * (both in HCCP1 and then next capability pointer are dword-based. + */ + next = (readl(hccp1) & 0xFFFF0000) >> 16; + + /* + * Look for "supported protocol" capability, major revision 3. + * There may be multiple of them. + */ + while ( next && ttl-- ) + { + xcap += next; + xcap_val = readl(xcap); + id = xcap_val & 0xFF; + next = (xcap_val & 0xFF00) >> 8; + + if ( id != PROTOCOL_ID ) + continue; + + if ( XHC_EXT_PORT_MAJOR(xcap_val) != 0x3 ) + continue; + + /* extract ports offset and count from the capability structure */ + val = readl(xcap + 2); + port_offset = val & 0xff; + port_count = (val >> 8) & 0xff; + + /* and reset them all */ + dbc_do_reset_debug_port(dbc, port_offset, port_count); + } +} + static void dbc_enable_dbc(struct dbc *dbc) { struct dbc_reg *reg = dbc->dbc_reg; @@ -677,6 +748,10 @@ static void dbc_enable_dbc(struct dbc *dbc) while ( (readl(®->ctrl) & (1U << DBC_CTRL_DCE)) == 0 ) cpu_relax(); + /* reset ports on initial open, to force re-enumerating by the host */ + if ( !dbc->open ) + dbc_reset_debug_port(dbc); + wmb(); writel(readl(®->portsc) | (1U << DBC_PSC_PED), ®->portsc); wmb(); -- generated by git-patchbot for /home/xen/git/xen.git#master
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |