[xen master] automation: qemu-smoke-arm32.sh: Modify script to use ImageBuilder

[patchbot@xxxxxxx]

commit 93f1431264d8fee3d0ddd00dbecc137c390e5c6d
Author:     Michal Orzel <michal.orzel@xxxxxxx>
AuthorDate: Tue Sep 27 11:47:23 2022 +0200
Commit:     Stefano Stabellini <stefano.stabellini@xxxxxxx>
CommitDate: Thu Dec 1 17:02:46 2022 -0800

    automation: qemu-smoke-arm32.sh: Modify script to use ImageBuilder
    
    Take an example from arm64 qemu test scripts and use ImageBuilder
    to generate u-boot script automatically. Calculating the addresses
    manually is quite error prone and also we will be able to benefit
    from using ImageBuilder when adding domUs to this test in the future.
    
    Install and use u-boot from the debian package.
    Modify the script so that binaries are loaded from u-boot via tftp.
    Remove dtuart=/pl011@9000000 because stdout-path in QEMU dtb is always
    set to pl011 node path.
    
    Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
    Reviewed-by: Luca Fancellu <luca.fancellu@xxxxxxx>
    Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
---
 automation/scripts/qemu-smoke-arm32.sh | 57 ++++++++++++++++------------------
 1 file changed, 27 insertions(+), 30 deletions(-)

diff --git a/automation/scripts/qemu-smoke-arm32.sh 
b/automation/scripts/qemu-smoke-arm32.sh
index c8ae0bfb9b..ef19b988c2 100755
--- a/automation/scripts/qemu-smoke-arm32.sh
+++ b/automation/scripts/qemu-smoke-arm32.sh
@@ -4,7 +4,9 @@ set -ex
 
 export DEBIAN_FRONTEND=noninteractive
 apt-get -qy update
-apt-get -qy install --no-install-recommends device-tree-compiler \
+apt-get -qy install --no-install-recommends u-boot-qemu \
+                                            u-boot-tools \
+                                            device-tree-compiler \
                                             curl \
                                             cpio
 
@@ -20,10 +22,6 @@ tar xvzf ../initrd.tar.gz
 find . | cpio -H newc -o | gzip > ../initrd.gz
 cd ..
 
-kernel=`stat -L --printf="%s" vmlinuz`
-initrd=`stat -L --printf="%s" initrd.gz`
-
-# For Xen, we need a couple of more node. Dump the DT from QEMU and add them
 # XXX QEMU looks for "efi-virtio.rom" even if it is unneeded
 curl -fsSLO https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom
 ./qemu-system-arm \
@@ -36,31 +34,31 @@ curl -fsSLO 
https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom
    -display none \
    -machine dumpdtb=virt.dtb
 
-dtc -I dtb -O dts virt.dtb > virt.dts
+# ImageBuilder
+echo 'MEMORY_START="0x40000000"
+MEMORY_END="0x80000000"
+
+DEVICE_TREE="virt.dtb"
+XEN="xen"
+DOM0_KERNEL="vmlinuz"
+DOM0_RAMDISK="initrd.gz"
+DOM0_CMD="console=hvc0 earlyprintk clk_ignore_unused root=/dev/ram0 
rdinit=/bin/sh"
+XEN_CMD="console=dtuart dom0_mem=512M bootscrub=0"
+
+NUM_DOMUS=0
+
+LOAD_CMD="tftpb"
+BOOT_CMD="bootm"
+UBOOT_SOURCE="boot.source"
+UBOOT_SCRIPT="boot.scr"' > config
 
-cat >> virt.dts << EOF
-/ {
-       chosen {
-               #address-cells = <0x2>;
-               #size-cells = <0x2>;
-               stdout-path = "/pl011@9000000";
-        xen,xen-bootargs = "console=dtuart dtuart=/pl011@9000000 dom0_mem=512M 
bootscrub=0";
-               xen,dom0-bootargs = "console=tty0 console=hvc0 earlyprintk 
clk_ignore_unused root=/dev/ram0 rdinit=/bin/sh";
-               dom0 {
-                       compatible = "xen,linux-zimage", "xen,multiboot-module";
-                       reg = <0x0 0x1000000 0x0 $kernel>;
-               };
-        dom0-ramdisk {
-                       compatible = "xen,linux-initrd", "xen,multiboot-module";
-                       reg = <0x0 0x3200000 0x0 $initrd>;
-               };
-       };
-};
-EOF
-dtc -I dts -O dtb virt.dts > virt.dtb
+rm -rf imagebuilder
+git clone https://gitlab.com/ViryaOS/imagebuilder
+bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
 
 rm -f smoke.serial
 set +e
+echo "  virtio scan; dhcp; tftpb 0x40000000 boot.scr; source 0x40000000"| \
 timeout -k 1 240 \
 ./qemu-system-arm \
    -machine virt \
@@ -70,11 +68,10 @@ timeout -k 1 240 \
    -serial stdio \
    -monitor none \
    -display none \
-   -dtb virt.dtb \
    -no-reboot \
-   -kernel ./xen \
-   -device loader,file=./vmlinuz,addr=0x1000000 \
-   -device loader,file=./initrd.gz,addr=0x3200000 |& tee smoke.serial
+   -device virtio-net-pci,netdev=n0 \
+   -netdev user,id=n0,tftp=./ \
+   -bios /usr/lib/u-boot/qemu_arm/u-boot.bin |& tee smoke.serial
 
 set -e
 (grep -q "^/ #" smoke.serial) || exit 1
--
generated by git-patchbot for /home/xen/git/xen.git#master