[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] libxl: add support for generic virtio device



commit 43ba5202e2eebd350161a8db674bf928c3e6f859
Author:     Viresh Kumar <viresh.kumar@xxxxxxxxxx>
AuthorDate: Wed Dec 14 12:03:09 2022 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Wed Dec 14 12:03:09 2022 +0100

    libxl: add support for generic virtio device
    
    This patch adds basic support for configuring and assisting generic
    Virtio backends, which could run in any domain.
    
    An example of domain configuration for mmio based Virtio I2C device is:
    virtio = ["type=virtio,device22,transport=mmio"]
    
    To make this work on Arm, allocate Virtio MMIO params (IRQ and memory
    region) and pass them to the backend and update guest device-tree to
    create a DT node for the Virtio devices.
    
    Add special support for I2C and GPIO devices, which require the
    "compatible" DT property to be set, among other device specific
    properties. Support for generic virtio devices is also added, which just
    need a MMIO node but not any special DT properties, for such devices the
    user needs to pass "virtio,device" in the "type" string.
    
    The parsing of generic virtio device configurations will be done in a
    separate commit.
    
    Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
    Reviewed-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
    Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
---
 tools/libs/light/Makefile                 |   1 +
 tools/libs/light/libxl_arm.c              | 100 +++++++++++++++++++++
 tools/libs/light/libxl_create.c           |   4 +
 tools/libs/light/libxl_internal.h         |   6 ++
 tools/libs/light/libxl_types.idl          |  18 ++++
 tools/libs/light/libxl_types_internal.idl |   1 +
 tools/libs/light/libxl_virtio.c           | 144 ++++++++++++++++++++++++++++++
 7 files changed, 274 insertions(+)

diff --git a/tools/libs/light/Makefile b/tools/libs/light/Makefile
index 374be1cfab..4fddcc6f51 100644
--- a/tools/libs/light/Makefile
+++ b/tools/libs/light/Makefile
@@ -106,6 +106,7 @@ OBJS-y += libxl_vdispl.o
 OBJS-y += libxl_pvcalls.o
 OBJS-y += libxl_vsnd.o
 OBJS-y += libxl_vkb.o
+OBJS-y += libxl_virtio.o
 OBJS-y += libxl_genid.o
 OBJS-y += _libxl_types.o
 OBJS-y += libxl_flask.o
diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c
index fa3d61f1e8..ddc7b2a159 100644
--- a/tools/libs/light/libxl_arm.c
+++ b/tools/libs/light/libxl_arm.c
@@ -113,6 +113,19 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc,
         }
     }
 
+    for (i = 0; i < d_config->num_virtios; i++) {
+        libxl_device_virtio *virtio = &d_config->virtios[i];
+
+        if (virtio->transport != LIBXL_VIRTIO_TRANSPORT_MMIO)
+            continue;
+
+        rc = alloc_virtio_mmio_params(gc, &virtio->base, &virtio->irq,
+                                      &virtio_mmio_base, &virtio_mmio_irq);
+
+        if (rc)
+            return rc;
+    }
+
     /*
      * Every virtio-mmio device uses one emulated SPI. If Virtio devices are
      * present, make sure that we allocate enough SPIs for them.
@@ -956,6 +969,79 @@ static int make_virtio_mmio_node(libxl__gc *gc, void *fdt, 
uint64_t base,
     return fdt_end_node(fdt);
 }
 
+/*
+ * The DT bindings for I2C device are present here:
+ *
+ * 
https://www.kernel.org/doc/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
+ */
+static int make_virtio_mmio_node_i2c(libxl__gc *gc, void *fdt)
+{
+    int res;
+
+    res = fdt_begin_node(fdt, "i2c");
+    if (res) return res;
+
+    res = fdt_property_compat(gc, fdt, 1, VIRTIO_DEVICE_TYPE_I2C);
+    if (res) return res;
+
+    return fdt_end_node(fdt);
+}
+
+/*
+ * The DT bindings for GPIO device are present here:
+ *
+ * 
https://www.kernel.org/doc/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
+ */
+static int make_virtio_mmio_node_gpio(libxl__gc *gc, void *fdt)
+{
+    int res;
+
+    res = fdt_begin_node(fdt, "gpio");
+    if (res) return res;
+
+    res = fdt_property_compat(gc, fdt, 1, VIRTIO_DEVICE_TYPE_GPIO);
+    if (res) return res;
+
+    res = fdt_property(fdt, "gpio-controller", NULL, 0);
+    if (res) return res;
+
+    res = fdt_property_cell(fdt, "#gpio-cells", 2);
+    if (res) return res;
+
+    res = fdt_property(fdt, "interrupt-controller", NULL, 0);
+    if (res) return res;
+
+    res = fdt_property_cell(fdt, "#interrupt-cells", 2);
+    if (res) return res;
+
+    return fdt_end_node(fdt);
+}
+
+static int make_virtio_mmio_node_device(libxl__gc *gc, void *fdt, uint64_t 
base,
+                                        uint32_t irq, const char *type,
+                                        uint32_t backend_domid)
+{
+    int res;
+
+    res = make_virtio_mmio_node_common(gc, fdt, base, irq, backend_domid);
+    if (res) return res;
+
+    /* Add device specific nodes */
+    if (!strcmp(type, VIRTIO_DEVICE_TYPE_I2C)) {
+        res = make_virtio_mmio_node_i2c(gc, fdt);
+        if (res) return res;
+    } else if (!strcmp(type, VIRTIO_DEVICE_TYPE_GPIO)) {
+        res = make_virtio_mmio_node_gpio(gc, fdt);
+        if (res) return res;
+    } else if (strcmp(type, VIRTIO_DEVICE_TYPE_GENERIC)) {
+        /* Doesn't match generic virtio device */
+        LOG(ERROR, "Invalid type for virtio device: %s", type);
+        return -EINVAL;
+    }
+
+    return fdt_end_node(fdt);
+}
+
 static const struct arch_info *get_arch_info(libxl__gc *gc,
                                              const struct xc_dom_image *dom)
 {
@@ -1277,6 +1363,20 @@ next_resize:
             }
         }
 
+        for (i = 0; i < d_config->num_virtios; i++) {
+            libxl_device_virtio *virtio = &d_config->virtios[i];
+
+            if (virtio->transport != LIBXL_VIRTIO_TRANSPORT_MMIO)
+                continue;
+
+            if (virtio->backend_domid != LIBXL_TOOLSTACK_DOMID)
+                iommu_needed = true;
+
+            FDT( make_virtio_mmio_node_device(gc, fdt, virtio->base,
+                                              virtio->irq, virtio->type,
+                                              virtio->backend_domid) );
+        }
+
         /*
          * The iommu node should be created only once for all virtio-mmio
          * devices.
diff --git a/tools/libs/light/libxl_create.c b/tools/libs/light/libxl_create.c
index 612eacfc7f..beec3f6b6f 100644
--- a/tools/libs/light/libxl_create.c
+++ b/tools/libs/light/libxl_create.c
@@ -1752,6 +1752,10 @@ static void domcreate_launch_dm(libxl__egc *egc, 
libxl__multidev *multidev,
         libxl__device_add(gc, domid, &libxl__pvcallsif_devtype,
                           &d_config->pvcallsifs[i]);
 
+    for (i = 0; i < d_config->num_virtios; i++)
+        libxl__device_add(gc, domid, &libxl__virtio_devtype,
+                          &d_config->virtios[i]);
+
     switch (d_config->c_info.type) {
     case LIBXL_DOMAIN_TYPE_HVM:
     {
diff --git a/tools/libs/light/libxl_internal.h 
b/tools/libs/light/libxl_internal.h
index a7c447c10e..0dc8b8f210 100644
--- a/tools/libs/light/libxl_internal.h
+++ b/tools/libs/light/libxl_internal.h
@@ -166,6 +166,11 @@
 /* Convert pfn to physical address space. */
 #define pfn_to_paddr(x) ((uint64_t)(x) << XC_PAGE_SHIFT)
 
+/* Virtio device types */
+#define VIRTIO_DEVICE_TYPE_GENERIC   "virtio,device"
+#define VIRTIO_DEVICE_TYPE_I2C       "virtio,device22"
+#define VIRTIO_DEVICE_TYPE_GPIO      "virtio,device29"
+
 /* logging */
 _hidden void libxl__logv(libxl_ctx *ctx, xentoollog_level msglevel, int 
errnoval,
              const char *file /* may be 0 */, int line /* ignored if !file */,
@@ -4003,6 +4008,7 @@ static inline int *libxl__device_type_get_num(
 
 extern const libxl__device_type libxl__vfb_devtype;
 extern const libxl__device_type libxl__vkb_devtype;
+extern const libxl__device_type libxl__virtio_devtype;
 extern const libxl__device_type libxl__disk_devtype;
 extern const libxl__device_type libxl__nic_devtype;
 extern const libxl__device_type libxl__vtpm_devtype;
diff --git a/tools/libs/light/libxl_types.idl b/tools/libs/light/libxl_types.idl
index 9e3d33cb5a..0cfad8508d 100644
--- a/tools/libs/light/libxl_types.idl
+++ b/tools/libs/light/libxl_types.idl
@@ -278,6 +278,11 @@ libxl_vkb_backend = Enumeration("vkb_backend", [
     (2, "LINUX")
     ])
 
+libxl_virtio_transport = Enumeration("virtio_transport", [
+    (0, "UNKNOWN"),
+    (1, "MMIO"),
+    ])
+
 libxl_passthrough = Enumeration("passthrough", [
     (0, "default"),
     (1, "disabled"),
@@ -703,6 +708,18 @@ libxl_device_vkb = Struct("device_vkb", [
     ("multi_touch_num_contacts", uint32)
     ])
 
+libxl_device_virtio = Struct("device_virtio", [
+    ("backend_domid", libxl_domid),
+    ("backend_domname", string),
+    ("type", string),
+    ("transport", libxl_virtio_transport),
+    ("devid", libxl_devid),
+    # Note that virtio-mmio parameters (irq and base) are for internal
+    # use by libxl and can't be modified.
+    ("irq", uint32),
+    ("base", uint64)
+    ])
+
 libxl_device_disk = Struct("device_disk", [
     ("backend_domid", libxl_domid),
     ("backend_domname", string),
@@ -980,6 +997,7 @@ libxl_domain_config = Struct("domain_config", [
     ("dtdevs", Array(libxl_device_dtdev, "num_dtdevs")),
     ("vfbs", Array(libxl_device_vfb, "num_vfbs")),
     ("vkbs", Array(libxl_device_vkb, "num_vkbs")),
+    ("virtios", Array(libxl_device_virtio, "num_virtios")),
     ("vtpms", Array(libxl_device_vtpm, "num_vtpms")),
     ("p9s", Array(libxl_device_p9, "num_p9s")),
     ("pvcallsifs", Array(libxl_device_pvcallsif, "num_pvcallsifs")),
diff --git a/tools/libs/light/libxl_types_internal.idl 
b/tools/libs/light/libxl_types_internal.idl
index fb0f4f23d7..e24288f1a5 100644
--- a/tools/libs/light/libxl_types_internal.idl
+++ b/tools/libs/light/libxl_types_internal.idl
@@ -33,6 +33,7 @@ libxl__device_kind = Enumeration("device_kind", [
     (15, "VSND"),
     (16, "VINPUT"),
     (17, "VIRTIO_DISK"),
+    (18, "VIRTIO"),
     ])
 
 libxl__console_backend = Enumeration("console_backend", [
diff --git a/tools/libs/light/libxl_virtio.c b/tools/libs/light/libxl_virtio.c
new file mode 100644
index 0000000000..6a38def2fa
--- /dev/null
+++ b/tools/libs/light/libxl_virtio.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2022 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_internal.h"
+
+static int libxl__device_virtio_setdefault(libxl__gc *gc, uint32_t domid,
+                                           libxl_device_virtio *virtio,
+                                           bool hotplug)
+{
+    return libxl__resolve_domid(gc, virtio->backend_domname,
+                                &virtio->backend_domid);
+}
+
+static int libxl__device_from_virtio(libxl__gc *gc, uint32_t domid,
+                                     libxl_device_virtio *virtio,
+                                     libxl__device *device)
+{
+    device->backend_devid   = virtio->devid;
+    device->backend_domid   = virtio->backend_domid;
+    device->devid           = virtio->devid;
+    device->domid           = domid;
+
+    device->backend_kind    = LIBXL__DEVICE_KIND_VIRTIO;
+    device->kind            = LIBXL__DEVICE_KIND_VIRTIO;
+
+    return 0;
+}
+
+static int libxl__set_xenstore_virtio(libxl__gc *gc, uint32_t domid,
+                                      libxl_device_virtio *virtio,
+                                      flexarray_t *back, flexarray_t *front,
+                                      flexarray_t *ro_front)
+{
+    const char *transport = 
libxl_virtio_transport_to_string(virtio->transport);
+
+    flexarray_append_pair(back, "irq", GCSPRINTF("%u", virtio->irq));
+    flexarray_append_pair(back, "base", GCSPRINTF("%lu", virtio->base));
+    flexarray_append_pair(back, "type", GCSPRINTF("%s", virtio->type));
+    flexarray_append_pair(back, "transport", GCSPRINTF("%s", transport));
+
+    flexarray_append_pair(front, "irq", GCSPRINTF("%u", virtio->irq));
+    flexarray_append_pair(front, "base", GCSPRINTF("%lu", virtio->base));
+    flexarray_append_pair(front, "type", GCSPRINTF("%s", virtio->type));
+    flexarray_append_pair(front, "transport", GCSPRINTF("%s", transport));
+
+    return 0;
+}
+
+static int libxl__virtio_from_xenstore(libxl__gc *gc, const char *libxl_path,
+                                       libxl_devid devid,
+                                       libxl_device_virtio *virtio)
+{
+    const char *be_path, *tmp = NULL;
+    int rc;
+
+    virtio->devid = devid;
+
+    rc = libxl__xs_read_mandatory(gc, XBT_NULL,
+                                  GCSPRINTF("%s/backend", libxl_path),
+                                  &be_path);
+    if (rc) goto out;
+
+    rc = libxl__backendpath_parse_domid(gc, be_path, &virtio->backend_domid);
+    if (rc) goto out;
+
+    rc = libxl__xs_read_checked(gc, XBT_NULL,
+                               GCSPRINTF("%s/irq", be_path), &tmp);
+    if (rc) goto out;
+
+    if (tmp) {
+        virtio->irq = strtoul(tmp, NULL, 0);
+    }
+
+    tmp = NULL;
+    rc = libxl__xs_read_checked(gc, XBT_NULL,
+                               GCSPRINTF("%s/base", be_path), &tmp);
+    if (rc) goto out;
+
+    if (tmp) {
+        virtio->base = strtoul(tmp, NULL, 0);
+    }
+
+    tmp = NULL;
+    rc = libxl__xs_read_checked(gc, XBT_NULL,
+                               GCSPRINTF("%s/transport", be_path), &tmp);
+    if (rc) goto out;
+
+    if (tmp) {
+        if (!strcmp(tmp, "mmio")) {
+            virtio->transport = LIBXL_VIRTIO_TRANSPORT_MMIO;
+        } else {
+            return ERROR_INVAL;
+        }
+    }
+
+    tmp = NULL;
+    rc = libxl__xs_read_checked(gc, XBT_NULL,
+                               GCSPRINTF("%s/type", be_path), &tmp);
+    if (rc) goto out;
+
+    if (tmp) {
+        int len = sizeof(VIRTIO_DEVICE_TYPE_GENERIC) - 1;
+
+        if (!strncmp(tmp, VIRTIO_DEVICE_TYPE_GENERIC, len)) {
+            virtio->type = libxl__strdup(NOGC, tmp);
+        } else {
+            return ERROR_INVAL;
+        }
+    }
+
+out:
+    return rc;
+}
+
+static LIBXL_DEFINE_UPDATE_DEVID(virtio)
+
+#define libxl__add_virtios NULL
+#define libxl_device_virtio_compare NULL
+
+DEFINE_DEVICE_TYPE_STRUCT(virtio, VIRTIO, virtios,
+    .set_xenstore_config = (device_set_xenstore_config_fn_t)
+                           libxl__set_xenstore_virtio,
+    .from_xenstore = (device_from_xenstore_fn_t)libxl__virtio_from_xenstore,
+    .skip_attach = 1
+);
+
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.