[xen master] automation: Add support for using XTF for arm64 testing

[patchbot@xxxxxxx]

commit 99ba7abbda7d42156f9ed70224750244ed42d120
Author:     Michal Orzel <michal.orzel@xxxxxxx>
AuthorDate: Fri Dec 16 14:30:11 2022 +0100
Commit:     Stefano Stabellini <stefano.stabellini@xxxxxxx>
CommitDate: Mon Dec 19 13:30:15 2022 -0800

    automation: Add support for using XTF for arm64 testing
    
    Introduce support for using XTF on Arm to perform low-level testing.
    For the purpose of the CI testing, let's use the fork [1] from upstream
    XTF with implemented support for arm64 (the upstream XTF only supports
    x86).
    
    Add a new script under automation/scripts to be used by the CI XTF test
    jobs to perform the following tasks:
     - Compiling XTF,
     - Generating u-boot script using ImageBuilder,
     - Running Xen with XTF as domU in pure dom0less configuration using Qemu,
     - Checking test result.
    
    The script takes the name of the XTF test to run as a first parameter.
    
    [1] https://gitlab.com/xen-project/fusa/xtf.git (branch xtf-arm)
    
    Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
    Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
---
 automation/scripts/qemu-xtf-dom0less-arm64.sh | 68 +++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/automation/scripts/qemu-xtf-dom0less-arm64.sh 
b/automation/scripts/qemu-xtf-dom0less-arm64.sh
new file mode 100755
index 0000000000..3ec9cf74e1
--- /dev/null
+++ b/automation/scripts/qemu-xtf-dom0less-arm64.sh
@@ -0,0 +1,68 @@
+#!/bin/bash
+
+set -ex
+
+# Name of the XTF test
+xtf_test=$1
+
+# Message returned by XTF in case of success
+passed="Test result: SUCCESS"
+
+# XXX QEMU looks for "efi-virtio.rom" even if it is unneeded
+curl -fsSLO https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom
+./binaries/qemu-system-aarch64 \
+   -machine virtualization=true \
+   -cpu cortex-a57 -machine type=virt \
+   -m 2048 -smp 2 -display none \
+   -machine dumpdtb=binaries/virt-gicv2.dtb
+
+# XTF
+# Build a single XTF test passed as a first parameter to the script.
+# Build XTF with GICv2 support to match Qemu configuration and with SBSA UART
+# support, so that the test will use an emulated UART for printing messages.
+# This will allow us to run the test on both debug and non-debug Xen builds.
+rm -rf xtf
+git clone https://gitlab.com/xen-project/fusa/xtf.git -b xtf-arm
+make -C xtf TESTS=tests/${xtf_test} CONFIG_SBSA_UART=y CONFIG_GICV2=y 
-j$(nproc)
+cp xtf/tests/${xtf_test}/test-mmu64le-${xtf_test} binaries/xtf-test
+
+# ImageBuilder
+echo 'MEMORY_START="0x40000000"
+MEMORY_END="0xC0000000"
+
+XEN="xen"
+DEVICE_TREE="virt-gicv2.dtb"
+
+XEN_CMD="console=dtuart"
+
+DOMU_KERNEL[0]="xtf-test"
+DOMU_MEM[0]="128"
+
+NUM_DOMUS=1
+
+LOAD_CMD="tftpb"
+UBOOT_SOURCE="boot.source"
+UBOOT_SCRIPT="boot.scr"' > binaries/config
+
+rm -rf imagebuilder
+git clone https://gitlab.com/ViryaOS/imagebuilder
+bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c 
binaries/config
+
+# Run the test
+rm -f smoke.serial
+set +e
+echo "  virtio scan; dhcp; tftpb 0x40000000 boot.scr; source 0x40000000"| \
+timeout -k 1 120 \
+./binaries/qemu-system-aarch64 \
+    -machine virtualization=true \
+    -cpu cortex-a57 -machine type=virt \
+    -m 2048 -monitor none -serial stdio \
+    -smp 2 \
+    -no-reboot \
+    -device virtio-net-pci,netdev=n0 \
+    -netdev user,id=n0,tftp=binaries \
+    -bios /usr/lib/u-boot/qemu_arm64/u-boot.bin |& tee smoke.serial
+
+set -e
+(grep -q "${passed}" smoke.serial) || exit 1
+exit 0
--
generated by git-patchbot for /home/xen/git/xen.git#master