[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] acpi: add TPM2 interface definition



commit fb751d9a2431e01586844978d38b7fa5b5468ff4
Author:     Jennifer Herbert <jennifer.herbert@xxxxxxxxxx>
AuthorDate: Mon May 8 14:15:20 2023 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Mon May 8 14:15:20 2023 +0200

    acpi: add TPM2 interface definition
    
    This patch introduces an optional TPM 2 interface definition to the ACPI 
table,
    which is to be used as part of a vTPM 2 implementation.
    
    Signed-off-by: Jennifer Herbert <jennifer.herbert@xxxxxxxxxx>
    Reviewed-by: Jason Andryuk <jandryuk@xxxxxxxxx>
    Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 docs/misc/xenstore-paths.pandoc |  3 ++-
 tools/firmware/hvmloader/util.c | 10 ++++++++++
 tools/libacpi/Makefile          |  3 ++-
 tools/libacpi/acpi2_0.h         | 33 +++++++++++++++++++++++++++++++++
 tools/libacpi/build.c           | 40 ++++++++++++++++++++++++++++++++++++++++
 tools/libacpi/libacpi.h         |  1 +
 tools/libacpi/ssdt_tpm2.asl     | 27 +++++++++++++++++++++++++++
 7 files changed, 115 insertions(+), 2 deletions(-)

diff --git a/docs/misc/xenstore-paths.pandoc b/docs/misc/xenstore-paths.pandoc
index e67e164855..bffb8ea544 100644
--- a/docs/misc/xenstore-paths.pandoc
+++ b/docs/misc/xenstore-paths.pandoc
@@ -274,7 +274,8 @@ circumstances where the generation ID needs to be changed.
 
 The TPM version to be probed for.
 
-A value of 1 indicates to probe for TPM 1.2.
+A value of 1 indicates to probe for TPM 1.2, whereas a value of 2
+indicates that a TPM 2.0 using CRB should be probed.
 A value of 0 or an invalid value will result in no TPM being probed.
 If unset, a default of 1 is assumed.
 
diff --git a/tools/firmware/hvmloader/util.c b/tools/firmware/hvmloader/util.c
index e3c37b88ce..e82047d993 100644
--- a/tools/firmware/hvmloader/util.c
+++ b/tools/firmware/hvmloader/util.c
@@ -1013,6 +1013,16 @@ void hvmloader_acpi_build_tables(struct acpi_config 
*config,
             config->tis_hdr = (uint16_t *)ACPI_TIS_HDR_ADDRESS;
             config->tpm_version = 1;
             break;
+
+        case 2:
+            config->table_flags |= ACPI_HAS_TPM;
+            config->crb_id = (uint16_t *)TPM_CRB_INTF_ID;
+
+            mem_hole_populate_ram(TPM_LOG_AREA_ADDRESS >> PAGE_SHIFT,
+                                  TPM_LOG_SIZE >> PAGE_SHIFT);
+            memset((void *)TPM_LOG_AREA_ADDRESS, 0, TPM_LOG_SIZE);
+            config->tpm_version = 2;
+            break;
         }
     }
 
diff --git a/tools/libacpi/Makefile b/tools/libacpi/Makefile
index aa9c520cbe..0e6fbe897a 100644
--- a/tools/libacpi/Makefile
+++ b/tools/libacpi/Makefile
@@ -15,7 +15,8 @@ C_SRC-$(CONFIG_X86) = dsdt_anycpu.c dsdt_15cpu.c 
dsdt_anycpu_qemu_xen.c dsdt_pvh
 C_SRC-$(CONFIG_ARM_64) = dsdt_anycpu_arm.c
 DSDT_FILES ?= $(C_SRC-y)
 C_SRC = $(addprefix $(ACPI_BUILD_DIR)/, $(DSDT_FILES))
-H_SRC = $(addprefix $(ACPI_BUILD_DIR)/, ssdt_s3.h ssdt_s4.h ssdt_pm.h 
ssdt_tpm.h ssdt_laptop_slate.h)
+H_SRC = $(addprefix $(ACPI_BUILD_DIR)/, ssdt_s3.h ssdt_s4.h ssdt_pm.h)
+H_SRC += $(addprefix $(ACPI_BUILD_DIR)/, ssdt_tpm.h ssdt_tpm2.h 
ssdt_laptop_slate.h)
 
 MKDSDT_CFLAGS-$(CONFIG_ARM_64) = -DCONFIG_ARM_64
 MKDSDT_CFLAGS-$(CONFIG_X86) = -DCONFIG_X86
diff --git a/tools/libacpi/acpi2_0.h b/tools/libacpi/acpi2_0.h
index 212f5ab641..fbbf8da660 100644
--- a/tools/libacpi/acpi2_0.h
+++ b/tools/libacpi/acpi2_0.h
@@ -112,6 +112,37 @@ struct acpi_20_tcpa {
 };
 #define ACPI_2_0_TCPA_LAML_SIZE (64*1024)
 
+/*
+ * TPM2
+ */
+struct acpi_20_tpm2 {
+    struct acpi_header header;
+    uint16_t platform_class;
+    uint16_t reserved;
+    uint64_t control_area_address;
+    uint32_t start_method;
+    uint8_t start_method_params[12];
+    uint32_t log_area_minimum_length;
+    uint64_t log_area_start_address;
+};
+#define TPM2_ACPI_CLASS_CLIENT      0
+#define TPM2_START_METHOD_CRB       7
+
+/*
+ * TPM register I/O Mapped region, location of which defined in the
+ * TCG PC Client Platform TPM Profile Specification for TPM 2.0.
+ * See table 9 - Only Locality 0 is used here. This is emulated by QEMU.
+ * Definition of Register space is found in table 12.
+ */
+#define TPM_REGISTER_BASE           0xFED40000
+#define TPM_CRB_CTRL_REQ            (TPM_REGISTER_BASE  + 0x40)
+#define TPM_CRB_INTF_ID             (TPM_REGISTER_BASE  + 0x30)
+
+#define TPM_LOG_AREA_ADDRESS        0xFED50000
+
+#define TPM_LOG_AREA_MINIMUM_SIZE   (64 << 10)
+#define TPM_LOG_SIZE                (64 << 10)
+
 /*
  * Fixed ACPI Description Table Structure (FADT) in ACPI 1.0.
  */
@@ -422,6 +453,7 @@ struct acpi_20_slit {
 #define ACPI_2_0_RSDT_SIGNATURE ASCII32('R','S','D','T')
 #define ACPI_2_0_XSDT_SIGNATURE ASCII32('X','S','D','T')
 #define ACPI_2_0_TCPA_SIGNATURE ASCII32('T','C','P','A')
+#define ACPI_2_0_TPM2_SIGNATURE ASCII32('T','P','M','2')
 #define ACPI_2_0_HPET_SIGNATURE ASCII32('H','P','E','T')
 #define ACPI_2_0_WAET_SIGNATURE ASCII32('W','A','E','T')
 #define ACPI_2_0_SRAT_SIGNATURE ASCII32('S','R','A','T')
@@ -435,6 +467,7 @@ struct acpi_20_slit {
 #define ACPI_2_0_RSDT_REVISION 0x01
 #define ACPI_2_0_XSDT_REVISION 0x01
 #define ACPI_2_0_TCPA_REVISION 0x02
+#define ACPI_2_0_TPM2_REVISION 0x04
 #define ACPI_2_0_HPET_REVISION 0x01
 #define ACPI_2_0_WAET_REVISION 0x01
 #define ACPI_1_0_FADT_REVISION 0x01
diff --git a/tools/libacpi/build.c b/tools/libacpi/build.c
index 9b9bc29d2c..4e5c20b32e 100644
--- a/tools/libacpi/build.c
+++ b/tools/libacpi/build.c
@@ -10,6 +10,7 @@
 #include "ssdt_s3.h"
 #include "ssdt_s4.h"
 #include "ssdt_tpm.h"
+#include "ssdt_tpm2.h"
 #include "ssdt_pm.h"
 #include "ssdt_laptop_slate.h"
 #include <xen/hvm/hvm_info_table.h>
@@ -341,6 +342,7 @@ static int construct_secondary_tables(struct acpi_ctxt 
*ctxt,
     struct acpi_20_hpet *hpet;
     struct acpi_20_waet *waet;
     struct acpi_20_tcpa *tcpa;
+    struct acpi_20_tpm2 *tpm2;
     unsigned char *ssdt;
     void *lasa;
 
@@ -440,6 +442,44 @@ static int construct_secondary_tables(struct acpi_ctxt 
*ctxt,
                              tcpa->header.length);
             }
             break;
+
+        case 2:
+            /*
+             * Check VID stored in bits 37:32 (3rd 16 bit word) of CRB
+             * identifier register.  See table 16 of TCG PC client platform
+             * TPM profile specification for TPM 2.0.
+             */
+            if ( config->crb_id[2] == 0 || config->crb_id[2] == 0xffff )
+                break;
+
+            ssdt = ctxt->mem_ops.alloc(ctxt, sizeof(ssdt_tpm2), 16);
+            if (!ssdt) return -1;
+            memcpy(ssdt, ssdt_tpm2, sizeof(ssdt_tpm2));
+            table_ptrs[nr_tables++] = ctxt->mem_ops.v2p(ctxt, ssdt);
+
+            tpm2 = ctxt->mem_ops.alloc(ctxt, sizeof(struct acpi_20_tpm2), 16);
+            if (!tpm2) return -1;
+            memset(tpm2, 0, sizeof(*tpm2));
+            table_ptrs[nr_tables++] = ctxt->mem_ops.v2p(ctxt, tpm2);
+
+            tpm2->header.signature = ACPI_2_0_TPM2_SIGNATURE;
+            tpm2->header.length    = sizeof(*tpm2);
+            tpm2->header.revision  = ACPI_2_0_TPM2_REVISION;
+            fixed_strcpy(tpm2->header.oem_id, ACPI_OEM_ID);
+            fixed_strcpy(tpm2->header.oem_table_id, ACPI_OEM_TABLE_ID);
+            tpm2->header.oem_revision = ACPI_OEM_REVISION;
+            tpm2->header.creator_id   = ACPI_CREATOR_ID;
+            tpm2->header.creator_revision = ACPI_CREATOR_REVISION;
+            tpm2->platform_class = TPM2_ACPI_CLASS_CLIENT;
+            tpm2->control_area_address = TPM_CRB_CTRL_REQ;
+            tpm2->start_method = TPM2_START_METHOD_CRB;
+            tpm2->log_area_minimum_length = TPM_LOG_AREA_MINIMUM_SIZE;
+            tpm2->log_area_start_address = TPM_LOG_AREA_ADDRESS;
+
+            set_checksum(tpm2,
+                         offsetof(struct acpi_header, checksum),
+                         tpm2->header.length);
+            break;
         }
     }
 
diff --git a/tools/libacpi/libacpi.h b/tools/libacpi/libacpi.h
index 187b977af5..d9387fc6eb 100644
--- a/tools/libacpi/libacpi.h
+++ b/tools/libacpi/libacpi.h
@@ -71,6 +71,7 @@ struct acpi_config {
     const struct hvm_info_table *hvminfo;
 
     const uint16_t *tis_hdr;
+    const uint16_t *crb_id;
 
     /*
      * Address where acpi_info should be placed.
diff --git a/tools/libacpi/ssdt_tpm2.asl b/tools/libacpi/ssdt_tpm2.asl
new file mode 100644
index 0000000000..e0f0ccd9c5
--- /dev/null
+++ b/tools/libacpi/ssdt_tpm2.asl
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: LGPL-2.1-only */
+/*
+ * ssdt_tpm2.asl
+ *
+ * Copyright (c) 2018-2022, Citrix Systems, Inc.
+ */
+
+/* SSDT for TPM CRB Interface for Xen with Qemu device model. */
+
+DefinitionBlock ("SSDT_TPM2.aml", "SSDT", 2, "Xen", "HVM", 0)
+{
+    Device (TPM)
+    {
+        Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: 
Hardware ID
+        Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+        {
+            Memory32Fixed (ReadWrite,
+                0xFED40000,         // Address Base
+                0x00001000,         // Address Length
+                )
+        })
+        Method (_STA, 0, NotSerialized)  // _STA: Status
+        {
+            Return (0x0F)
+        }
+    }
+}
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.