[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] amd: disable C6 after 1000 days on Zen2
commit f7065b24f4fb8813a896b883e6ffd03d67f8a8f2 Author: Roger Pau Monné <roger.pau@xxxxxxxxxx> AuthorDate: Mon Jul 31 15:05:48 2023 +0200 Commit: Jan Beulich <jbeulich@xxxxxxxx> CommitDate: Mon Jul 31 15:05:48 2023 +0200 amd: disable C6 after 1000 days on Zen2 As specified on Errata 1474: "A core will fail to exit CC6 after about 1044 days after the last system reset. The time of failure may vary depending on the spread spectrum and REFCLK frequency." Detect when running on AMD Zen2 and setup a timer to prevent entering C6 after 1000 days of uptime. Take into account the TSC value at boot in order to account for any time elapsed before Xen has been booted. Worst case we end up disabling C6 before strictly necessary, but that would still be safe, and it's better than not taking the TSC value into account and hanging. Disable C6 by updating the MSR listed in the revision guide, this avoids applying workarounds in the CPU idle drivers, as the processor won't be allowed to enter C6 by the hardware itself. Print a message once C6 is disabled in order to let the user know. Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> --- xen/arch/x86/cpu/amd.c | 74 ++++++++++++++++++++++++++++++++++++ xen/arch/x86/include/asm/msr-index.h | 2 + xen/include/xen/time.h | 1 + 3 files changed, 77 insertions(+) diff --git a/xen/arch/x86/cpu/amd.c b/xen/arch/x86/cpu/amd.c index df2681b7c4..89e33a5da6 100644 --- a/xen/arch/x86/cpu/amd.c +++ b/xen/arch/x86/cpu/amd.c @@ -1,8 +1,10 @@ +#include <xen/cpu.h> #include <xen/init.h> #include <xen/bitops.h> #include <xen/mm.h> #include <xen/param.h> #include <xen/smp.h> +#include <xen/softirq.h> #include <xen/pci.h> #include <xen/sched.h> #include <xen/warning.h> @@ -52,6 +54,8 @@ bool __read_mostly amd_acpi_c1e_quirk; bool __ro_after_init amd_legacy_ssbd; bool __initdata amd_virt_spec_ctrl; +static bool __read_mostly zen2_c6_disabled; + static inline int rdmsr_amd_safe(unsigned int msr, unsigned int *lo, unsigned int *hi) { @@ -972,6 +976,32 @@ void amd_check_zenbleed(void) val & chickenbit ? "chickenbit" : "microcode"); } +static void cf_check zen2_disable_c6(void *arg) +{ + /* Disable C6 by clearing the CCR{0,1,2}_CC6EN bits. */ + const uint64_t mask = ~((1ul << 6) | (1ul << 14) | (1ul << 22)); + uint64_t val; + + if (!zen2_c6_disabled) { + printk(XENLOG_WARNING + "Disabling C6 after 1000 days apparent uptime due to AMD errata 1474\n"); + zen2_c6_disabled = true; + /* + * Prevent CPU hotplug so that started CPUs will either see + * zen2_c6_disabled set, or will be handled by + * smp_call_function(). + */ + while (!get_cpu_maps()) + process_pending_softirqs(); + smp_call_function(zen2_disable_c6, NULL, 0); + put_cpu_maps(); + } + + /* Update the MSR to disable C6, done on all threads. */ + rdmsrl(MSR_AMD_CSTATE_CFG, val); + wrmsrl(MSR_AMD_CSTATE_CFG, val & mask); +} + static void cf_check init_amd(struct cpuinfo_x86 *c) { u32 l, h; @@ -1240,6 +1270,9 @@ static void cf_check init_amd(struct cpuinfo_x86 *c) amd_check_zenbleed(); + if (zen2_c6_disabled) + zen2_disable_c6(NULL); + check_syscfg_dram_mod_en(); amd_log_freq(c); @@ -1249,3 +1282,44 @@ const struct cpu_dev amd_cpu_dev = { .c_early_init = early_init_amd, .c_init = init_amd, }; + +static int __init cf_check zen2_c6_errata_check(void) +{ + /* + * Errata #1474: A Core May Hang After About 1044 Days + * Set up a timer to disable C6 after 1000 days uptime. + */ + s_time_t delta; + + /* + * Zen1 vs Zen2 isn't a simple model number comparison, so use STIBP as + * a heuristic to separate the two uarches in Fam17h. + */ + if (cpu_has_hypervisor || boot_cpu_data.x86 != 0x17 || + !boot_cpu_has(X86_FEATURE_AMD_STIBP)) + return 0; + + /* + * Deduct current TSC value, this would be relevant if kexec'ed for + * example. Might not be accurate, but worst case we end up disabling + * C6 before strictly required, which would still be safe. + * + * NB: all affected models (Zen2) have invariant TSC and TSC adjust + * MSR, so early_time_init() will have already cleared any TSC offset. + */ + delta = DAYS(1000) - tsc_ticks2ns(rdtsc()); + if (delta > 0) { + static struct timer errata_c6; + + init_timer(&errata_c6, zen2_disable_c6, NULL, 0); + set_timer(&errata_c6, NOW() + delta); + } else + zen2_disable_c6(NULL); + + return 0; +} +/* + * Must be executed after early_time_init() for tsc_ticks2ns() to have been + * calibrated. That prevents us doing the check in init_amd(). + */ +presmp_initcall(zen2_c6_errata_check); diff --git a/xen/arch/x86/include/asm/msr-index.h b/xen/arch/x86/include/asm/msr-index.h index 2382fc8e11..4d41c171d2 100644 --- a/xen/arch/x86/include/asm/msr-index.h +++ b/xen/arch/x86/include/asm/msr-index.h @@ -211,6 +211,8 @@ #define MSR_VIRT_SPEC_CTRL 0xc001011f /* Layout matches MSR_SPEC_CTRL */ +#define MSR_AMD_CSTATE_CFG 0xc0010296 + /* * Legacy MSR constants in need of cleanup. No new MSRs below this comment. */ diff --git a/xen/include/xen/time.h b/xen/include/xen/time.h index b7427460dd..9ceaec541f 100644 --- a/xen/include/xen/time.h +++ b/xen/include/xen/time.h @@ -53,6 +53,7 @@ struct tm wallclock_time(uint64_t *ns); #define SYSTEM_TIME_HZ 1000000000ULL #define NOW() ((s_time_t)get_s_time()) +#define DAYS(_d) SECONDS((_d) * 86400ULL) #define SECONDS(_s) ((s_time_t)((_s) * 1000000000ULL)) #define MILLISECS(_ms) ((s_time_t)((_ms) * 1000000ULL)) #define MICROSECS(_us) ((s_time_t)((_us) * 1000ULL)) -- generated by git-patchbot for /home/xen/git/xen.git#master
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |